Because of their svelte design and potent performance, BMWs are among the most well-known luxury automobile consumer brands.
BMWs can be expensive to purchase due to a few strange peculiarities, though. The head gasket is one issue. The head gasket in your BMW is an essential part of the engine and should be replaced right away if it is damaged.
A replacement BMW head gasket will typically cost you around $3,200. Between $2,900 at the low end and $3,600 at the high end, is the usual price range. The precise cost will vary based on the particular BMW model you own, the age of your vehicle, and the mechanic’s location.
The price of replacing a BMW head gasket depends on a number of factors. As a result, we today created this thorough essay on the price to replace a BMW head gasket. We will talk about typical costs for different BMW models as well as the price of replacing head gaskets.
In This Article...
Why Do I Need A New Head Gasket For My BMW?
The seal that the head gasket on your BMW’s engine creates between the cylinder head and engine block, along with the passageway for coolant and oil to reach the engine’s top, permits the engine to develop the proper level of compression.
The health of your BMW will suffer if the head gasket blows out or breaks, enabling coolant to enter the combustion chamber and mixing with the oil. This is especially true if you continue to drive.
Head gasket replacements typically cost between $1200 and $3000, depending on the extent of the damage and any repairs needed.
A noticeable coolant leak, low coolant levels, engine overheating, white smoke coming from the exhaust, bubbles in the coolant reservoir, and discolored oil are all indicators of a blown head gasket.
The best suggestion is to turn the BMW off, not drive it, and schedule a head gasket inspection with a repair if you suspect a blown head gasket. Otherwise, you can harm the engine permanently.
How much does it cost to fix a head gasket?
You may have to pay up to $2,000, if not more, to repair a head gasket. K-Seal is the long-lasting solution for leaky and blown head gaskets, saving you time and money.
A blown head gasket repair is every driver’s greatest nightmare. In order to prevent having to pay for expensive repairs, you need to address any head gasket leak symptoms as soon as you start to notice them.
How much does a 2004 BMW 325i head gasket cost?
Estimated cost of replacing the head gasket on a BMW 325i. The typical price to repair the head gasket on a BMW 325i ranges from $3,235 to $3,877. Between $1,202 and $1,313 is the projected price for parts, while labor costs are estimated to be between $2,033 and $2565.
What is the price of a BMW gasket?
At a dealership, labor costs are typically between $500 and $1,000 for a simple gasket replacement. It should cost less than $150 if you handle it yourself.
How long does a BMW head gasket replacement take?
How long does a blown head gasket take to repair? Depending on how severe the failure was, replacing the gasket could require anywhere from six hours to a few days. One of the worst problems a car can experience is a blown head gasket, and repairing it correctly takes time.
Is it pricey to repair a blown head gasket?
What is the price of replacing a blown head gasket? Repairing a head gasket can cost thousands of dollars, thus it is frequently quicker and more cost-effective to scrap the car than to pay to have it fixed. Although head gasket repairs often cost between $1,000 and $2,000, this is not because the parts are expensive.
Can you operate a BMW while the head gasket is blown?
Your head gasket has failed. Driving with a burst head gasket will surely result in other car problems. Before it’s too late, K-Seal can stop the issue in its tracks.
Technically, driving with a blown head gasket is possible, but we never recommend it. So why is it such a bad idea to drive with a burst head gasket?
How much does a BMW coolant leak repair cost?
Coolant leak repairs can be very expensive. Fixing this is expensive because it is a laborious operation. The price of BMW coolant repairs varies depending on a number of factors, but it typically ranges from $750 to $1,000. Although the parts themselves are not very expensive, the labor required by mechanics means that they may charge more for this kind of repair. The type of damage and the specific fixes the mechanic needs to do determine the costs of these repairs. You can be given a few alternative solutions for resolving your BMW coolant leaks by them.
Every option has pros and cons, so you should consider them all carefully before selecting one. Prior to selecting a mechanic, you should always collect various bids. Every repair shop will impose a different fee. If it does, it’s critical to decide which solutions are best for you and your circumstances.
They will be able to assist you during the entire decision-making process because you are working with reputable automotive shops. Since this is a significant purchase, you want the greatest possible workout for the money you are spending, thus you want someone to assist you.
Is replacing a head gasket a big job?
In order to replace the head gasket on the majority of cars, a sizable section of the engine must be removed. When the motor is reassembled, many of the removed parts, such as the cam shafts and timing gears, must be placed precisely where they were taken out. These factors combine to make replacing a head gasket challenging and time-consuming.
Head gasket replacement is a challenging task that ought to be left to qualified specialists. Even if you have a friend with extensive automotive knowledge, it’s a large job to entrust to a weekend mechanic since it typically requires specialized equipment and years of experience.
But there’s another query you ought to be posing:
Is there anything else I can do to get my car back on the road consistently and safely without shelling out a small fortune?
A series of solutions from BlueDevil is especially made to fix your blown or leaky head gasket quickly and effectively. The carefully formulated BlueDevil Head Gasket Sealer may stop any leak in a blown head gasket caused by wrapped or fractured heads or blocks.
For quick and effective repair of severe leaks, use BlueDevil 32 oz. Head Gasket Sealer. Your head gasket leak will be fixed using BlueDevil head gasket sealer. Get your automobile back on the road while saving hundreds or even thousands of dollars! You can purchase BlueDevil Head Gasket Sealer (Part #38386) online here or at ALL major Auto Part Retailers. Sealer for the head gasket.
For lesser leaks, use BlueDevil 16oz. An affordable do-it-yourself head gasket repair solution is BlueDevil Pour N Go Head Gasket Sealer. Pour N Go Head Gasket Sealer by BlueDevil (Part #00209) can be purchased online at this location or at MOST major auto part retailers.
Is replacing the engine preferable to the head gasket?
Even though excessive heat can cause bearing failure, coolant in the engine oil is typically to blame. You have had a substantial amount of coolant mix with your oil if, when you remove the engine’s dipstick, your oil resembles more of a chocolate milkshake. Your bearings will corrode and lose durability extremely rapidly if there is water in your oil. A new head gasket will stop the leak, but bearing damage has likely already occurred. If your head gasket leak is the root of this issue, it is nearly always best to replace the entire engine.
Consider using BlueDevil Head Gasket Sealer to stop the leak and keep your car on the road if you don’t have bearing damage and the expense of replacing your head gaskets doesn’t make sense given the worth of your automobile.
You may get BlueDevil Head Gasket Sealer from one of your neighborhood auto parts retailers, such as:
- AutoZone
- Advance Automotive
- Bentley Automobile Supply
- Auto Parts CarQuest
- NAPA Automotive
- O’Reilly Automotive
- Boys Pep
- Quick Track
- Specialists in bumper to bumper auto parts
- Distributor of S&E Quick Lube
- Automotive DYK
- Shops for Fisher Auto Parts
- Shop for Auto Plus Auto Parts
- Shops Hovis Auto & Truck Supply
- the Salvo Auto Parts
- Benefit Auto Stores
- Authentic Auto Parts retailers
- Shops for Bond Auto Parts
- Tidewater Fleet Provision
- Auto parts from bumper to bumper
- Auto Parts Any Part
- Cheap Auto Parts
A head gasket: Is it a large job?
The high cost of head gasket repair is typically not due to the cost of a replacement item, but rather to the amount of labor needed to solve the issue. Because the engine head must be removed and then replaced, replacing your head gasket takes a lot of time. Additionally, a mechanic will charge you more the longer they are compelled to work on that task rather than something else.
Why does a head gasket blow?
The easiest method to prevent a head gasket failure is to make sure your cooling system is in good working order because frequent overheating or driving after the car has overheated are the major causes of head gasket failures.
How long is a burst head gasket safe to drive with?
How long you can drive your automobile with a burst head gasket is difficult to say. Depending on the location of the fracture or tear and the symptoms the vehicle exhibits, the remaining driving time will vary. Within a day, some engines would no longer run at all. If you employ a temporary fix, you might be able to drive the automobile for a week or it might last for a few months.
Can a car with a burst head gasket still be driven?
Yes, in a nutshell, but it is not advised. Ignoring a blown head gasket will probably result in further harm to your engine and your finances. The most crucial and essential components of any engine that serve to seal off compartments are gaskets. It maintains the pressure inside by preventing leaks of fluid and entry of debris. When fastened together, gaskets constructed of insulating materials are used to seal the spaces between engine compartments.
Knowing the warning signals and what to do to get your automobile fixed when a gasket fails is crucial since it can cause major damage to your vehicle. A automobile with a blown head gasket typically doesn’t last more than a month, depending on how bad the leak or hole is. The loss of engine power, the breakdown of individual engine components, or the entire engine seizing up can all be caused by even a minor tear in the head gasket, which allows gasoline and air to seep out or other engine liquids like water, oil, and antifreeze to mix. Making sure that the car’s head and other gaskets are in good condition could help you avoid having to pay a lot of money for costly engine repairs.
Are BMW oil leaks frequent?
Despite having excellent engineering and craftsmanship, BMWs experience problems just like every other vehicle. Many BMW engines develop oil leaks, which require costly and time-consuming repairs.
What are the initial indications of a ruptured head gasket?
Head gasket failure can happen from an engine overheating too frequently (due to a blocked radiator, coolant leak, a broken fan, etc.), but the opposite is also true: an engine can overheat due to a burst head gasket. An overheated engine might result from hot exhaust gases leaking into the cooling system or coolant leaking into the cylinders and burning off as steam.
The alloy cylinder head may distort if the automobile is driven while it is overheated, and steam damage to the catalytic converter can greatly increase the cost of repair.