Are truck tool box dimensions standard? Your needs and the size of your truck will determine what kind of tool box you require. All trucks may not be compatible with truck tool chests. The type and form factor you select should make it easy for you to access your tools and equipment.
Regardless of the form factor you select, there are two main types of truck bed tool boxes: mid-size and full-size. A truck tool box should fit the majority of trucks in its respective category, while not being completely universal.
For instance, tiny and medium pick-up trucks are best suited for toolboxes made to fit mid-size trucks (e.g., Tacoma, 4Runner, Colorado, Ridgeline, and Ranger)
On the other hand, full-size truck versions work best on bigger vehicles (e.g., F-150, F-250, Ram, Titan, and Tundra).
You can use a measuring tape to determine the measurements of your truck bed to make sure the model you desire will fit. The length of your truck bed can be determined by measuring the distance between the bulkhead and the tailgate.
In This Article...
How big is the bed of a Toyota Tacoma?
Depending on the model you select, the 2020 Toyota Tacoma offers two different truck beds. These truck beds have the same dimensions of 19.1 inches in height and 41.5 inches in width. Make sure you have the appropriate truck bed length for your upcoming journey whether you want to load up tools, bicycles, or plywood. You will get 60.5 inches of space if you choose for the typical truck bed. With the extended base option, you will have 73.7 inches of space if you need it for your outdoor toys.
The size of truck tool bins varies.
There are a few facts you’ll need to know before you start truck bed toolbox shopping. You must measure your truck bed before choosing a design, size, or construction to ensure that the box you purchase will fit your vehicle. To gather all the measurements you need for measuring your truck bed, simply follow these three easy procedures.
1. Determine how far apart your bed rails are.
Your toolbox’s maximum width is determined by this distance. From the outside of one bed rail to the outside of the other rail, measure the distance. The wider top that rests on the bed rails and the narrower base that fits in between the rails are the two length specifications you’ll notice when shopping for toolboxes.
2. Establish the bed’s wall height
Measure the height of your truck bed from the ground to the top of the rail to determine this value. You can determine the maximum height of your toolbox using this measurement. A few huge tool chests may be taller than your bed and won’t fit correctly, but the majority of normal boxes won’t stretch all the way to the floor.
3. Measure the distance between the bulkhead and the base of your wheel wells.
Know how much space your box will have between the bulkhead and the bottom of each side’s wheel wells. Long and short full-size truck beds shouldn’t have any clearance problems. Midsize pickup beds that are shorter might.
- The big guys like Silverados, F-150s, Sierras, Tundras, Titans, and Rams are intended for full-size boxes.
- The majority of truck toolboxes are semi-custom sizes that fit trucks in the same class because many truck bed measurements are standard across brands and models. Mid-size and full-size are the two common sizes you’ll encounter while looking for a truck bed tool box.
- As its name suggests, mid-size boxes fit into the beds of mid-size and compact pickup trucks like Colorados, Tacomas, Frontiers, and more.
Pro Tip: You’ll need a narrower toolbox if your truck has flairside or stepside doors.
How much space is a typical truck toolbox?
- 16 inches (40.6 cm) to 28 1/4 inches is the size range for D size boxes (71.8 centimeters).
- Between 12 3/4 inches (32.4 cm) and 18 inches are the sizes of C boxes (45.7 centimeters).
Low Profile Single Lid
The low profile single lid design is intended to allow optimum visibility through the back window while conveniently holding bulky goods such large tools, other gear, or camping equipment.
- From 51 1/2 inches (148.6 cm) to 63 inches are available in this style (187.3 centimeters).
How much space does a Toyota Tacoma’s box have?
Which body style is best for you and your family when you choose the 2021 Toyota Tacoma is the first decision you will have to make. Fans of the Toyota Tacoma have two cab options to select from: Access Cab and Double Cab. Access Cab models accommodate four passengers, while Double Cab versions accommodate five passengers. Examine the Toyota Tacoma models’ interior measurements in more detail to see how much passenger capacity is offered.
Toyota Tacoma Access Cab Interior Dimensions
- Front and back legroom 24.6/22.9 Inches
- Headroom Front/Rear
- 34.9/30.7 Inches
- Shoulder Room Front/Rear
- Inches 58.3/56.5
- Hip Room Front and Rear
- Inches, 57.2/51.7
Toyota Tacoma Double Cab Interior Dimensions
- Front and back legroom 33.66/42.9 inches
- Shoulder Room Front/Rear
- Inches 58.3/58.9
- Headroom 39.7/38.3 inches in front and back
- Hip Room Front and Rear
- 57.2 x 56.3 inches
What Are the 2021 Toyota Tacoma Bed Lengths?
You need a vehicle that can take the load when hard work is a regular part of your life, and the 2021 Toyota Tacoma will fit all the criteria. There are two different bed length options for Toyota Tacoma trucks: a 6.1-foot long bed and a 5-foot short bed. With a width of 41.5 inches and a depth of 19.1 inches, the typical 6.1-foot bed offers 73.7 inches of usable length in the bed.
The Double Cab versions that come with the 5-foot short bed have an inner bed length of 60.5 inches, a maximum width of 41.5 inches, and a maximum depth of 19.1 inches. Drivers have access to 1,620 pounds of payload capacity with Toyota Tacoma Access Cab variants. The maximum payload for Toyota Tacoma Double Cab variants is 1,505 pounds.
Are Tacoma beds uniform in width?
Choose from one of two bed sizes to suit your unique requirements: (Length, Width, Height) of a 5-foot bed: 60.5/41.5/19.1 inches. Bed dimensions for a 6-foot frame are 73.7/41.5/19.1 inches.
How can a toolbox be installed in a vehicle without drilling?
Many modern trucks are equipped with pre-drilled holes to facilitate quick and simple tool box installation.
- Step 1: First, take the rubber plugs out of the openings that already exist. The bottom of the tool box you chose should nestle down to line up with the pre-existing holes once those plugs have been taken out.
- Step 3: Tighten the bolts to a close fit, but be careful not to overtighten them as this could harm the rail.
- Step 2: After everything is in position, screw the box firmly into place using J-hooks or regular nuts and bolts. Generally speaking, truck tool boxes require four to six bolts, depending on the size and style of the box.
Advice: Some tool packs include the installation hardware. If not, buying nuts and bolts online or at your neighborhood Home Depot is simple.
How do you gauge a truck bed’s width?
The distance from one inner sidewall to the other inside sidewall of a truck bed determines the width of the bed. If you want to haul broad products or buy a crossover tool box, it’s crucial to measure the width of your bed.
Does my vehicle need a toolbox?
You require a toolbox if you own a truck! There are numerous purposes for trucks, whether they are new or secondhand. Consider this. Not only is it annoying to carry equipment in the back seat, but dirty tools will make your truck look dirty.
What is the cost of a truck box?
A chassis cab vehicle with an enclosed, cuboid-shaped cargo space is known as a box truck, also known as a cube truck, cube van, rolling toaster, or box vani. Some secondhand box vehicles, such as a 6 to 10 year old 12 foot cube delivery truck, may only cost $1,676 in 2022. The price range for secondhand, more recent box trucks is $12,100–24,460. Less than two-year-old box trucks range in price from $30,150 to $41,230. Request quotations to get started and learn the cost of the goods mentioned below.
- Box Trucks used
- Crew Cab & Standard Cab
- Box trucks, light duty
- gasoline, diesel, and flex fuel
- Light Duty Class 1-8
- Box trucks 24 feet long
The most well-known manufacturers are Penske, GMC, Ford, Hino, Freightliner, and Isuzu.
Ranks by class:
- Class 7 and 8 heavy-duty box trucks, 24 to 26
- Class 1, 2, and 3 light-duty box trucks, ages 12 to 14.
- 16 to 18-foot medium-duty box trucks (classes 4, 5, and 6)
Who makes the toolboxes for Craftsman trucks?
We frequently observed the customers’ surprise at the inconsistent quality of the Craftsman brand in these reviews. Unfortunately, this once illustrious brand that stood for superb domestically produced goods has lost some of its devoted patrons as a result of dubious quality.
Regarding where Craftsman tools are created, there is some ambiguity. Many people believe that all Craftsman products are produced domestically due to their long American history. In fact, Forged in the USA is marked in large letters on a lot of the items. Their portable power tools are created in Hong Kong, but their screwdrivers, adjustable wrenches, and pliers are still made in the United States.
Significant production adjustments were implemented after Stanley Black & Decker acquired Craftsman four years ago. Craftsman truck tool boxes are currently produced in China and Mexico rather than the United States.
How big is a typical truck bed?
A typical bed is 8 feet long, 6 feet 5 inches long for a normal bed, and 5 feet 8 inches long for a short bed. It’s crucial to remember that these are average measurements, meaning that depending on the manufacturer, the precise lengths may vary by a few inches.
How can I determine my vehicle bed’s length using Vin?
All you have to do is adhere to the instructions below:
- Contact your car dealer once you have the VIN.
- Locate your truck’s VIN. It is located in the driver’s side door jamb or at the bottom of the driver’s side windshield.
- You can get the precise dimensions of your bed size from your dealer’s parts department.
There you have it, then! You’ll want to be protected before leaving on your camping trip with Jerry, the top-rated vehicle insurance app.
You only need to download the app, give your information, and in less than a minute, you’ll be connected with personalized estimates from the top providers in the country!
What size bed does a Tacoma short have?
The Tacoma model’s bed is available in two configurations. The Short Bed is 19.1 inches tall and the Long Bed is 41.5 inches wide. The length of the bed is, of course, one of the most crucial factors to take into account while looking for a pickup truck. You will receive a length of 60.5 inches with the Short Bed.
What dimensions are a Toyota Tacoma?
The 2021 Tacoma has dimensions of 70.6 inches in height, 212.3 inches in length, and 74.4 inches in width, allowing you to maneuver it through tight spaces.