Depending on the brake pad type used and the labor involved, replacing a BMW’s brake pads can cost between $150 and $300 per axle.
Replacement brake rotors for a BMW can go between $300 to $750 for all four rotors.
In This Article...
How much does it typically cost to change brake pads?
Between $115 and $300 is the typical brake pad replacement cost per axle (materials plus labor).
Most automobiles have two axles. A larger vehicle with more wheels and passengers may have more axles. Every mechanic has a different hourly rate, and every manufacturer sets the cost of their parts based on the materials used.
Replacement Services for Brakes
The typical price for replacing the brake pads on a BMW 328i is $187, which includes $92 for components and $95 for labor. Prices may change based on where you are.
Temporary Replacements
The general recommendation is to replace your brake pads every 50,000 miles. But this is only a generalization, and a number of variables could change that figure.
The suggested interval between replacements may vary depending on your driving style, the brand and quality of the brake pads on your BMW, and the brake pads’ actual material. It’s advisable to discuss the ideal mileage for your particular car with a dependable repair.
What is the price of replacing the brake pads on a BMW?
The cost of new brakes depends on your BMW model. Depending on the brake pad material, replacement brake pads can range in price from $150 to $300 per axle on average. Your brakes’ other components, including the rotors, may have been impacted by any prior damage to the brake pads.
What is the price of replacing the brake rotors and pads on a BMW?
Depending on the type of brake pads requested and the extent of the harm your previous worn-out pads have caused to the other components of your car, such as the rotors, replacing your BMW brake pads, which includes parts and labor, can cost anywhere between $150 and $300 per axle.
What is the price of replacing the brakes on a BMW 3 Series?
Depending on the brake pad type chosen and the degree of harm your old, worn-out brake pads caused to the various components of your car, such the rotors, replacing the brake pads on a 2020 BMW 3 Series might cost between $150 and $300 each axle.
How much do BMW brakes cost?
Depending on the type of brake pad selected, BMW brake pads can cost anywhere between $150 per axle and $450 per axle. In extremely rare circumstances, they can even be higher if the manufacturer demands that a certain brand of brake pads be supplied for your BMW.
When ought a BMW’s brake pad be changed?
Since BMWs are built to perform, we comprehend your desire to drive your coupe, sedan, or small SUV to their absolute limits. But it’s vital to keep in mind that how you drive has a big impact on how long your brakes last. You’ll probably need to repair your brake pads and rotors more frequently than drivers who smoothly coast to a halt if you frequently make abrupt stops. The environment you reside in also affects how well your brakes work; stop-and-go city traffic is harder on brakes than open rural roads, and hilly regions with steep downhills wear brakes out more quickly than a flat suburban landscape.
How can you tell when your BMW’s brakes need to be serviced? Brake pads should typically be replaced after 50,000 miles, but because driving styles and surroundings differ, it’s important to be aware of additional warning signs.
How much does replacing all four brake pads cost?
How much will it cost to get all four brake pads replaced? For all four wheels, it costs between $230 and $600 to replace all four brake pads, parts included. The caliber of these materials ranges from inferior to superior.
How much are the front brakes from BMW?
Best in Automotive Repair Replacement brake pads for a BMW 328i typically cost between $321 and $376. While parts are priced between $210 and $237, labor is predicted to cost between $111 and 140. Taxes and levies are not included in this range, nor are your particular model year or special location taken into account.
Do you need to replace the rotors while using BMW brake pads?
It is typically a good idea to just change the rotors at the same time because of the typical amount of mileage we receive from the OEM pads. If not, your new pads won’t last long before your rotors have reached the minimum wear level and need to be changed. Normally, replacing rotors rather than pads is a terrible idea.
BMW brake pads have a mileage limit.
The lifespan of brake pads can range from 30,000 to 70,000 miles, depending on the quality of the brake pads. Because they are denser, your rotors will last about 70,000 miles. Schedule a service appointment with us right away if you think it’s time to repair the brake pads or rotors on your car.
Can you change your own BMW brakes?
Just changing the pads is simple. You jack up the car, remove the wheel, the brake hardware, the slider pin bolt, the old brake pads, the compressed piston, the new brake pads, the slider pin bolt, the brake hardware, the sensor, and the wheel. Done. It’s even simpler if you have fixed caliper (sport) brakes.
What is the price of replacing brake pads?
An axle’s worth of brake pad replacement typically costs $150, and this sum includes both parts and labor. However, your overall expenses may change based on the caliber of the pads you choose for your car.
How long do BMW’s 4mm brake pads last?
A set of brake pads should easily last 60,000 miles unless you use them excessively, and depending on your driving style, they may even last a little bit longer. 32k miles from the initial set of front brake pads (changed them at 4mm), and nearly 50k miles from the rears.
Can I just swap out the brake pads?
You can definitely replace only the worn brake pads if they haven’t been damaged or thinned past the discard thickness.
It’s the rotor minimum thickness required by the rotor or car manufacturer.
The performance and long-term wear of the brake pads are influenced by the brake rotor and vice versa.
Typical wear patterns on old rotors include brake dust left behind from an old brake pad set.
The new brake pads may not therefore properly fit the old rotor. Due to this mismatch, the new brake pads may wear unevenly and generate noise and vibration (which will lead to premature brake pad replacement).
Additionally, keep in mind that an old, worn-out rotor can eventually require replacement. The time and money you think you are saving may not be as great as you imagined.
Resurfacing entails scraping a minute layer of material off the brake disc or rotor’s front and back surfaces.
By doing this, worn-out brake pads’ grooves, pits, and remaining friction material are removed, leaving a smooth surface for the new brake pads to grab onto, allowing the new brake pads to wear down uniformly.
Should all four brake pads be changed at once?
You are staring at a brake pad that has worn out completely. But should you replace all four brake pads at once?
First things first, you should replace either the front or the rear brake pads simultaneously. One should be wearing out roughly at the same rate as the other unless there is a serious problem. But not all four brake pads necessarily follow that rule.
How many hours of labor are required to replace brakes?
However, let’s contrast the labor costs for a minor and a large brake service. Typically, a pad replacement and rotor service take 2.8 hours. However, replacing both front brake calipers takes an average of 1.4 hours, while replacing both front disc brake rotors is estimated to take 1.0 hours.
How much ought a complete brake job to run?
There may be a significant price difference depending on the car you drive. According on the materials used in your vehicle’s brake pads, the cost to replace brake pads might range from $150 to $300 per axle on average. The cheapest brake pads are made of organic material.
Do BMWs cost a lot to maintain?
BMWs are by far the most expensive car manufacturer to repair, claims Your Mechanic. The competition is not even close. With an average maintenance cost of $17,800 over ten years, BMW comes in #1. Mercedes-Benz came in second with an average maintenance cost of $12,900 during a 10-year period. In contrast, the typical Toyota only cost $5,500 to maintain during a 10-year period because they are recognized for requiring less maintenance.
According to Your Mechanic, such high maintenance costs are usual in German premium vehicles. Audi comes in sixth with an average $12,400 maintenance expense over a 10-year period. This is primarily a result of the pricey, high-end parts that these luxury vehicles require. Naturally, it will cost a lot of money to fix those pieces when they break or need maintenance.
However, while being premium vehicles, they also have ongoing problems. For instance, according to Your Mechanic, a BMW is four times more likely to not start than a typical automobile. It was ranked seventh overall as a result. Additionally, the window regulator on the BMW required replacement 18 times more frequently than the window regulator on the ordinary car.
What is the time required to replace all four brakes and rotors?
Consider this: even a skilled automotive technician needs at least an hour to replace the braking rotors and pads on some cars. Brake pad repair could take several hours or longer for a person with little to no skill.
Learning the procedure, assembling the necessary supplies, carefully carrying out each step, and then putting everything back together again might easily take up a half-day of effort that may not be worthwhile in the end.
You might need to start over to fix the issue and correctly install the new brake pads if you complete the procedure only to discover that the brake pedal feels strange or that your brakes have begun to screech or grind. What a pain in the neck!
An easy approach that might ultimately save you time and money is to have a professional do your brake pad repair.
Can I operate my vehicle with noisy brakes?
It depends on how severe the damage is. Before the brakes stop functioning entirely, it can still be possible to drive the vehicle for a while. There are two reasons why this is not advised: It’s not secure. Driving while your brakes are grinding will simply make the problem worse and raise the cost of repair.
What constitutes a complete brake job?
A brake job often include replacing the brake linings (which entails changing the braking shoes and/or pads), refinishing the rotors, bleeding the system as necessary, adding fresh brake fluid, and checking for other worn components.