The P245/75R16 tires are part of the base trim. However, as you move up the trim level roster, you’ll have the following tire sizes available to you: P265/65R17. P265/70R16.
In This Article...
What size tire can you put on a Tacoma that is stock?
Nothing catches my eye more quickly than a Tacoma with large tires. Just how good do they look? If you want to perform serious off-roading and overlanding with the Tacoma, you really need to go bigger to notice the wheels and enhance break-over angles. This explains why so many people are interested in learning what tire size will fit comfortably on a stock Tacoma. Can 33 inches fit without a lift? Will you require a front leveling kit or wheel spacers? This essay will provide answers to all of these queries and more.
What size tire can you fit on a Toyota Tacoma that is factory-fresh? The largest tire that will fit on factory rims without a body or suspension lift is 275/70/17. To fit 33-inch tires, or 285/70/17, on a stock suspension, the front fender liner and rear fender flair must be altered.
Therefore, there are three things to think about before upgrading the factory tires on your truck or ute.
- Clearance for fender liners
- Wheel offset and backspacing
- spare wheel room
Since the 275/70/17 tire is narrower but still offers more ground clearance with the 70 profile, which is 1 inch taller but the same width as the factory, you can get away with installing a wider tire on the stock Tacoma rims.
But what if you want to travel 33 miles per hour with a factory suspension and a 0 offset wheel? What adjustments are necessary to make them fit?
The height of 275 70R17 tires.
275/70R17 tires have a 32.2″ diameter, a 10.8″ section width, and a 17″ wheel diameter. They had a 101.0″ circumference and 627 rotations per mile. They can typically be put on 7-8.5″ wide wheels.
Can a Tacoma with standard tires fit 33-inch tires?
No and yes. You can put 33s on your car without making any adjustments and drive straight without any problems. There are issues when you turn. It takes very little cutting and spacers to completely clear 33 tires without a lift.
Without using wheel spacers, we initially installed the 33s on our third-generation Tacoma. However, once you turned, the tires rubbed horribly on the upper control arms. The rubbing on the body wasn’t all that severe, and you could drive on them with little contact on the fender plastics.
When we installed 33s on a lifted 2nd Gen Tacoma even with aftermarket control arms and a lift, we encountered the same problem. While the friction on the body was barely noticeable, it was intolerable on the control arm. The truck is not appropriate to drive and is absolutely not suitable for off-road travel with just one problem.
The rubbing on the 3rd Gen Tacoma’s UCAs was gone after we installed a 1.25 spacer, however the rubbing on the body was quite unpleasant because we extended our scrub radius by extending the tire outward.
No, you can’t simply install wheel spacers and trim the fenders and fender well plastics to fit 33s on a Tacoma.
Spend some time making room for that size tire in order to fit 33s without using a lift. Both on- and off-road testing should be done in this.
Can a Tacoma with stock tires fit 275 tires?
Stock 2022 Toyota Tacoma tires have a maximum overall diameter and breadth of 32.5 inches and 275 millimeters, respectively. Various Tacoma models’ wheel diameters will determine the precise tire aspect ratio.
We appreciate you reading and hope that we were able to clarify the largest tire size that would fit on a stock Tacoma. Please read these excellent articles about Toyota for more fascinating reading.
My Toyota Tacoma will fit 17-inch wheels, but can I?
Please take note that these suggestions are based on OEM wheels. You can use a wider tire by using an updated rim with a different backspacing. Also, you should think about fender flares if you go very wide (more than 285).
Maximum tire sizes are:
15-inch rims, 265/75 R15A Although a 265/80 R15 tire would fit well, to our knowledge no one manufactures one. The biggest size that is available is 265/75 R15.
You might be able to use some wider tires than those we’ve specified when adding a leveling kit. It could need some cutting, but it is still feasible.
15-inch wheels: If you have 15-inch wheels and have purchased a lift kit, spend a little more money and purchase some 16- or 17-inch wheels to go with it. There are no suitable tire sizes for 15-inch wheels.
Reminder: If you’re considering a three-lift, you should think about getting a new set of wheels or getting some wheel spacers. The truth is that there aren’t many widely used tire sizes that can benefit from your raise while also fitting the stock rims.
You may widen the tires on the Tacoma to a maximum of 315mm using aftermarket rims (or about 12.5). However, if you choose to go this big, be ready to reduce the fenders and wheel wells because the tires will rub. The same holds true with 1.5 wheel spacers. Running tires as wide as 315 poses an increased danger of early front wheel bearing failure. The weight of 315 tires and the increased offset they demand were too much for the Tacoma front wheel bearing to support.
For three lift kits, a standard Tacoma tire width is 285mm. Thus, 17-inch wheels with 285/70 R17 tires are a wise choice (2 taller and .8 wider than factory). 285/75 R16 tires are identical in size to the 17-inch wheels for 16-inch wheels. In order to prevent rubbing, you will probably need to reduce the forward cab mount if you are interested in using tires of this size. In addition, even though there are many 285mm tires available, most of them need wheels that are 8″, which are wider than the OEM wheels.
Will Tacoma’s 32-inch tires fit?
A 32-inch tire will be the most typical setup that we are seeing that is suitable with a leveling system. The standard pairing appears to be a 32-inch diameter and a 9-inch width, or 275/65. You shouldn’t have to cut or trim anything with a leveling kit on your third-generation Tacoma to accomplish this.
A 265 65R17 is what size tire?
The 265/65R17 tire is 30.6 tall, has a section width of 10.4, and fits 17-inch wheels. With a 96.0 circumference, there are 660 revolutions per mile. They can typically be installed on wheels with a rim width of 17 x 7.5 to 9.5.
Will the stock Tacoma’s 265 70R16 fit?
Realistically, the answer is 32 if you are using standard suspension and don’t want to wreck your truck.
The stock tire size for my Tacoma (265/70R16) was 30.610.4. If you don’t want to alter your truck in any way, switching to a little larger tire size (265/75/1631.610.4) is the best option. Make sure the tire you choose is a real 32 tire or one that is very near to it.
Some tires may measure 32.8 inches, which is actually a 33-inch tire, and you will undoubtedly experience some rubbing problems. I recently chatted with an off-road enthusiast who drives a Toyota Tacoma stock with 33 tires. He told me that in order to make the configuration work, he had to drastically cut back his cab mount and raise his fender liners.
Therefore, it is possible to run 33 tires on a stock Tacoma, but you will need to make significant cuts.
What is the diameter of a 265 70R17 tire?
The section width of a 265/70R17 tire, which measures the width of the tire from its inner to its outer sidewall, is 10.4 inches. The largest size of wheel that can accommodate the tire’s mounting is one with a rim diameter of 17 inches. The distance between the wheel rim and the top of the tire tread is measured as sidewall height, which is 7.3 inches (186 mm). The tire’s outside diameter is represented by the overall diameter of 31.7 inches (804 mm), which also denotes the height of the tire. The tire’s outer perimeter measures 99.5 inches (2524.6 mm) in circumference. The number of tire rotations represents how many times a tire turns when traveling a given distance in miles or kilometers. the 265/70R17 tire rotates at 637 miles per hour (396 revolutions per kilometer).
Are 285 and 33-inch tires equivalent?
You are really comparing two entirely different measures when you compare a 33 tire to a 285 wide tire. The 33 is equal to the tire’s width (285), multiplied by the sidewall’s height % (75), multiplied by two because there are two sidewalls, and added to the inch-based wheel size (16). Phew!!! Let’s simplify that mouthful into a straightforward formula as there’s a lot to process at once.
Although 285 is the tread width in millimeters and 33 is the tire diameter, 285 broad tires are identical to 33 tires. The standard metric equivalent size for 33’s is 285/75/16.
How much lift will I need to get past a 33-seat Tacoma?
While it’s not impossible, you will undoubtedly need to cut or trim something in order to fit 33s without a raise. Depending on whether you clear the control arms or not, you ought to be capable of lifting 2-3 pounds.
Although suspension lifts technically do not clear tires for off-road use, they can nonetheless be useful. Your body’s static ride height is altered when you lift your truck. For instance, while driving every day, you might not rub, but when driving off-road and stuffing that tire into your wheel well, you almost certainly will. This rubbing would be significantly harsher both on and off the road without a lift.
In response to the infamous query, no raise is necessary to accommodate 33-inch tires on a factory Tacoma; other modifications may be necessary, such as fender liner pushback, CMC (cab mount chop), rocker panel cap trimming, fender trimming, body trimming, etc. Having said that, you can still bolt the wheel and tire to your hub; you may simply need to perform some trimming. Something needs to give since even when you grow taller, the inner fender’s size remains constant.
In order to determine exactly what needs to be trimmed, we will place 33 tires on a stock, third-generation Tacoma without the use of a lift. Snail Trail 44 will shortly donate that truck.
Realize that it’s crucial that the tires under your Tacoma don’t rub, regardless of the size you choose. If they continue to rub and you don’t fix the problem, eventually you’re going to destroy something or rip something off.
Our up/down travel on the Bilstein 5100 kit 2.8 front with Icon Add a Leaf 2 rearit has cleared everything fairly well after mounting, operating, and flexing it. Following tire installation, there were NO general on-road rubbings on the fender liners or fender well. That included the curb drop test as well as full-lock reverse. The tires cleared the pavement fully.
Driving off-road is a little bit of a different situation. Even driving on a bumpy dirt road wasn’t too difficult, although when the tires were jammed into the wheel wells, they did rub a little. It wouldn’t take much cutting at all to completely clear 33s since they hardly ever rub on the inside of the fender close to the pinch weld.