It appears that your car needs H11 bulbs for dipped beams and H7 bulbs for main beams.
For all uses, including headlight bulbs all the way down to interior dashboard bulbs, we carry NISSAN QASHQAI automobile bulbs in our inventory.
In This Article...
Can you swap a headlight out on your own?
For instructions on how to replace the headlight in your specific car and which headlight bulb to buy, consult your owner’s handbook.
Step 4. Unscrew the old headlight
Zullo warns that every car is unique. “He claims that while you can reach the bulb with some autos, you can’t with others. Sometimes you have to remove the inner fender to reach behind it because the battery or air filter housing is in the way.
However, changing the halogen bulb is all that is required if you can get the headlight open. This entails carefully unlocking the bulb after examining how it is secured. Zullo cautions that if the clips that are being used here are broken, the entire headlight would need to be replaced. “According to him, you must first examine how it is connected, softly disassemble it, and then carefully reassemble it without touching the bulb’s glass.
Step 5. Screw in the new headlight bulb
Without touching the bulb’s glass, carefully screw in the new bulb. If you do, the oil and grime on your hands could cause the bulb to burst once it heats up. Your car’s hood should be closed. Your headlights ought to work perfectly again after installing the new bulb, allowing you to enjoy driving your automobile day or night.
Most of the time, changing a headlight is simple and doesn’t need sending your car to the shop. See what other do-it-yourself auto maintenance tasks are available.
H7 bulbs have high or low beams.
Autos have traditionally employed dual-beam bulbs. By changing the reflecting pattern, a single housing with a single bulb may switch between a high and low beam. So to say, a two-in-one light bulb.
However, more recent vehicles use two distinct single-beam bulbs for each purpose. The car’s headlights are then equipped with two bulbs, one on each side of the car.
Each of these beams uses either an H1 or a H7 bulb, as you would have guessed. And this is where the H1 and H7 bulbs differ from one another.
The high-beam light is produced by the H1, while the low-beam light is produced by the H7.
Both the H1 and H7 are single-beam lamps that produce a fixed beam using a single filament.
This headlight is mostly used on open motorways and at night on country roads; it is not always used.
The H7 beam’s shorter range makes it suitable for lighting the road ahead of the car.
Which vehicles have H7 headlights?
You don’t have many options when it comes to the bulb fitting when buying new headlight bulbs. Your vehicle determines the type of bulb required. Several BMW, Audi, and Mercedes models, as well as many others, use H7 bulbs as headlights.
Using the bulb finder on our home page, you may identify the appropriate bulb fitting for your car. Check out our assortment of halogen H7 bulbs, which are ideal for headlights if your car needs them. We also have LED H7 bulbs if you want a fashionable aesthetic that is probably not street-legal.
A dip beam is what?
The most common setting for your headlights at night is referred to as “dipped beam,” while “main beam” or “full beam” increases their brightness on dark, deserted routes.
Can my automobile be operated with only one headlight?
- When it is raining and the windshield wipers are activated
- when visibility of things on the road is hampered by poor weather
Getting Pulled Over for a Violation
It’s likely that an officer will stop you if you’re driving about in a car with only one functional headlight. This holds true even if you are driving your automobile while the road is illuminated by two functional parking lights. A citation may be issued to you if you break the law.
If it’s raining and your windshield wipers are on, the only time an officer couldn’t pull you stop for a headlight violation is if it’s not safe to do so. This constitutes a secondary crime. Only if you are pulled over for another traffic infraction, such failing to stop when a traffic light is red, may you receive a ticket for this one.
It’s a minor infraction to drive without both of your headlights functioning. For this category of violation, there is no jail time; however, you could be subject to a $150 fine.
What is the price of changing a headlight bulb?
The majority of fatal auto accidents, according to the National Highway Traffic Safety Administration (NHTSA), take place after dark. It’s crucial to have functioning headlights if you want to keep your family and yourself safe when driving.
Fortunately, repairing your headlights is among the least expensive car repairs you’ll need to make.
A mechanic’s headlight bulb replacement typically costs between $100 and $130. The cost of doing the work yourself will be significantly influenced by the brand, model, and kind of bulb used in your car.
Should I unplug the car’s battery before changing the headlights?
When replacing a blown headlight bulb, always unplug the battery. The electrical system of your car is connected to the headlight bulbs. While the alternator recharges the battery, they will draw power from it. You should always disconnect the battery when working on your car’s electrical system to be safe. The battery doesn’t have to be taken out. Instead, all you have to do is unplug the ground cable (the black cable) until the blown headlight bulb has been replaced.
Does the same bulb power both the high and low beams?
Halogen and HID Bulbs Many expensive and powerful cars still have two lamps. In these instances, the low beam is lit by a halogen bulb, and the high beam by a high-intensity discharge (HID) bulb. These two bulbs cannot be switched for another. You must swap out any burned-out bulbs with similar ones.
Are there standard H7 bulb fittings?
We frequently get questioned if our bulb fittings are universal because we have customers purchasing new headlight bulbs in locations all around the world. My vehicle uses H1 bulbs is an illustration of the kind of inquiry we frequently receive. Can I use the H1 bulbs you sell in my car? Simply put, the response is yes.
Every bulb we offer has a universal fitting. For instance, if your automobile uses H1 car bulbs that are typically factory installed, and you are looking at OSRAM Night Breaker Unlimited H1 car bulbs on our website, the two are physically identical and can be used interchangeably. The sole thing that differentiates the bulb from others is its internal design and technology (and in the case of Night Breaker Unlimited, perform better than standard).
For instance, universal fittings can be used with bulbs such the H1, H4, and H7. As long as you purchase the right fitting for your car, they will fit regardless of the manufacturer or retailer from where you purchase them.
Some buyers believe they must purchase bulbs unique to their nation, although this is untrue. It is true that some bulbs, like those for Australian or American automobile brands, may be made exclusively for them, but universal fittings like the H7 can still be used in any nation. A H7 purchased in Australia is identical to a H7 purchased in the UK or any other country for that matter.
Finding out what fitting of bulbs you require is the first step in choosing a bulb for your car. You may do this by consulting the owner’s manual for your car and by utilizing our headlight bulb finder.
Can I substitute H4 with H7?
They cannot easily be switched out because the variations between H4 and H7 bulbs are too considerable. In particular, there are two reasons for this:
- The type of base plate differs between H4 and H7 bulbs. Therefore, you cannot just put a H7 bulb in an H4 socket.
- The position of the filaments in the bulbs is matched to the reflectors in the headlamp. The light beam for the high beam and the low beam would not be cast accurately into the road because the filament in a H7 lamp is located differently than it is in an H4 lamp.
Adapters are not a good solution
Anyone who has the bright idea to use an H4 converter on a H7 bulb is doing themselves no favors because the light source won’t work properly. In addition, using a workaround like this invalidates the vehicle’s and the headlamp’s operating permits.
Can LEDs be used to replace H7 bulbs?
It’s crucial to understand that LED headlights differ from halogen ones. Additionally, although some use the phrase “LED bulbs” to describe the former, this is inaccurate.
According to Carfax, halogen headlights operate similarly to conventional incandescent lamps. A tungsten filament (the “heating element”) is located inside the bulb and is encircled by halogen gas. The element begins to glow as current passes through it, emitting heat and light. The filament is absent from xenon bulbs, often known as “high-intensity discharge” bulbs, which instead use electrical current to heat xenon gas directly.
Compared to halogens, LEDs have a few benefits. They use less energy, don’t heat up as much, and take up less space while being brighter. An LED assembly, however, cannot simply be used to replace a halogen bulb. Although conversion kits are offered, they have a few shortcomings.
First off, although running cooler than halogen headlights, everything around LEDs gets hotter. As a result, they require special cooling facilities in addition to separate current regulators. Consequently, even though the size of the individual LEDs may be less, the whole headlamp conversion kit may be larger overall.
Second, switching from halogen to LED headlights may not truly improve visibility. And that has to do with the surroundings as much as the lights themselves.