If you haven’t already changed the battery in your BMW and don’t know how to do it, here is a quick method. There are nine steps that make up the battery replacement process:
- Remove your key from the ignition after turning it off. Next, find your battery. In a BMW, where is the battery? The majority of the time, you can discover it within your trunk, either on the floor or on the right side. Located it? The battery liner should be removed.
- With a 10mm wrench, unplug the negative battery terminal right away, then store the cable.
- The cable must then be disconnected from the positive battery terminal. To complete the task correctly, lift up the red plastic cover and look for a 10mm nut; you must loosen it.
- The time has come to remove the brackets. Two brackets, one on top and one on the side, support the battery. First, you should unbolt the latter using two 13mm bolts.
- Take out the battery from the trunk, but be careful because it could be heavy.
- Take images of the battery’s model number and technical specifications before you install the new battery. When registering your battery, the BimmerTech expert will need this information very much.
- Now that the old battery has been removed, gently set the new one in its place. Just make sure the settings are correct.
- crucial step Secure the battery properly. You must reinstall the brackets in order to accomplish this, being careful not to overtighten them. If not, you could break the battery housing. Connecting a Liquid Lead-Acid battery to the vent house can stop the vent house’s gasses from accumulating within your trunk if you’re installing one.
- Finally, connect the battery terminals by connecting the positive battery terminal first, then the negative terminal, after cleaning the battery posts with a battery terminal brush.
NOTE: Purchase our Battery Registration service before you ever begin replacing or registering your battery, and choose a preferred date when you could replace and register the battery simultaneously. Make sure you can do everything in one day because battery registration is required following every battery change and needs to be done immediately after battery replacement.
In This Article...
How can I reset my BMW now that the battery has been changed?
One of the vehicles with the most advanced intelligent operating system in the world is the BMV. Therefore, the first thing you must do after every hit or replacement of an object in the car is to restart the entire vehicle.
This setup enables the computer to anticipate your next replacement requirement and alert you to it. After changing the battery, resetting the BMW computer is a quick and easy process.
- First, turn on the controller again.
- Step 2: Press “Trip” to activate it and make it light.
- Step 3: Hold down the “trip” button while continuing to press and hold it until the “Reset” button shows up on the screen.
- Reset in Step 4
Can you replace a BMW battery on your own?
Do you not adore your BMW? And you intend to continue using it for as long as possible, right? Change your oil, replace your air filters, and do other routine maintenance on your BMW as needed to ensure its longevity. Maintaining the battery in your BMW, however, is the one item that contributes the most to flawless operation of your vehicle.
However, a lot of individuals ponder whether BMW battery replacement and registration are straightforward do-it-yourself tasks or require the services of a qualified specialist. We affirm that you can manage the replacement on your own. However, if you lack computer literacy, let us handle the registration process on your behalf.
Here, we’ll go over how to install a battery in a car, examine BMW battery registration in further detail, and provide additional information on the BMW battery reset process.
What kind of battery is needed for a BMW 328I?
The BMW 328I features battery groups H7, H8, and H6 depending on the year. For a complete list of battery group codes and dimensions, see the table below.
(1) Battery group codes made up of letters and numbers are used by the Battery Council International (BCI) (ie. H6, T4, 24, 34r). These refer to the size of battery that will fit a certain vehicle the best (in terms of physical dimensions, terminal positions, and kind).
What is the price of a new battery for a BMW 328i?
A new battery for a BMW 328i typically costs between $504 and $530. Between $97 to $122 is the projected cost of labor, while the cost of parts is $408. Taxes and levies are not included in this range, nor are your particular model year or special location taken into account.
What sort of battery is used by a BMW?
If you desire an aftermarket battery, you may need to cross the component number from a BMW dealership while looking up a battery for your BMW. Many OEM batteries are not marked with the group size.
The battery used by the BMW is lead-acid. You can pick between two types: gel or absorbent glass mats (AGM). The OEM AGM battery is what the maker advises you to use in place of the stock battery.
The majority of BMW vehicles employ either performance or advanced batteries. Advanced batteries are used in cars with lots of electronics, whilst performance batteries are used in aftermarket modified cars.
How can I restart my automobile once the battery has been changed?
My car’s battery needs to be changed, but I’m not sure how to restart it after doing so. How can I restart my automobile once the battery has been changed?
In less than two minutes, find out if your auto insurance is being overcharged.
- To allow the engine control systems to detect any potential issues, drive the automobile for at least 10 kilometers.
- The check engine light will illuminate if there are any problems, and the electronic control module is probably to blame.
- If it doesn’t turn on, everything is fine.
Check out Jerry app if you want to look at a good strategy to enhance your auto insurance policy now that the battery has been changed. We all can quickly provide you with individual quotations from leading insurers, leaving you with the decision of which plan best suits your needs. Once you choose one, we will all even assist you with switching!
Do BMW batteries require programming?
Modern, late-model BMW batteries must be “registered” or matched to the onboard ECU for optimum operation and battery longevity, which is a frequently overlooked and underappreciated requirement. You might be asking why this is essential, and some online armchair experts could even argue that it isn’t really necessary and is just a way for the service provider to make more money by replacing the batteries. Some people turn to buying a new battery from an auto parts store, installing it themselves, and quickly learning that their battery needs to be replaced, again, in order to avoid the additional cost of registering their BMW battery.
How can I reset the computer in my BMW?
My automobile won’t turn over. After some web study, it appears that the ECU is most likely the problem. How can the factory settings be restored on a BMW computer?
Amazing investigative abilities! Unplugging the negative battery cable for 10 to 15 minutes will reset a BMW ECU. For most BMW models, this ought to be sufficient to reset the ECU.
You can also try jumpstarting your car to reset it if this doesn’t work. If a low battery is the problem, this will also be helpful!
However, if you still have trouble starting your car after jumping the battery, you should speak with a mechanic to find out more about what’s going on.
Save money on your car insurance with the Jerryaan insurance comparison app, which searches for inexpensive prices with more than 50 different insurance companies for free. This will help offset the cost of expert repairs.
You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. Each year, $887 is saved by the typical Jerry user.
What should I do after replacing the battery?
My automobile just got a new battery. I am aware that the new battery needs time to charge, so I will let the car run for a bit. Is there anything else, though? What should I do following a car battery replacement?
wonderful question In order for the alternator to properly charge the battery after a car battery replacement, you should drive the vehicle for roughly 30 minutes.
A battery replacement typically necessitates a radio and computer reset on the car. Your radio presets may need to be reset as a result of this.
After changing the battery, the computer occasionally does not restart itself. The dashboard may still display an error code. Use an OBD-II diagnostic scanner to identify the issue’s root cause in this circumstance. You can reset the computer by looking up the code.
You can *clean the battery terminals with a wire brush and battery cleanser every six months** to extend the life of your new battery. When you can, park in a garage to shield your battery from chilly temperatures.
As a heads up, batteries often last for five years. Although experts advise buying a new battery every three to four years, many last far longer.