Please take note that these suggestions are based on OEM wheels. You can use a wider tire by using an updated rim with a different backspacing. Also, you should think about fender flares if you go very wide (more than 285).
Maximum tire sizes are:
15-inch rims, 265/75 R15A Although a 265/80 R15 tire would fit well, to our knowledge no one manufactures one. The biggest size that is available is 265/75 R15.
You might be able to use some wider tires than those we’ve specified when adding a leveling kit. It could need some cutting, but it is still feasible.
15-inch wheels: If you have 15-inch wheels and have purchased a lift kit, spend a little more money and purchase some 16- or 17-inch wheels to go with it. There are no suitable tire sizes for 15-inch wheels.
Reminder: If you’re considering a three-lift, you should think about getting a new set of wheels or getting some wheel spacers. The truth is that there aren’t many widely used tire sizes that can benefit from your raise while also fitting the stock rims.
You may widen the tires on the Tacoma to a maximum of 315mm using aftermarket rims (or about 12.5). However, if you choose to go this big, be ready to reduce the fenders and wheel wells because the tires will rub. The same holds true with 1.5 wheel spacers. Running tires as wide as 315 poses an increased danger of early front wheel bearing failure. The weight of 315 tires and the increased offset they demand were too much for the Tacoma front wheel bearing to support.
For three lift kits, a standard Tacoma tire width is 285mm. Thus, 17-inch wheels with 285/70 R17 tires are a wise choice (2 taller and .8 wider than factory). 285/75 R16 tires are identical in size to the 17-inch wheels for 16-inch wheels. In order to prevent rubbing, you will probably need to reduce the forward cab mount if you are interested in using tires of this size. In addition, even though there are many 285mm tires available, most of them need wheels that are 8″, which are wider than the OEM wheels.
In This Article...
Q: What rims are interchangeable between different cars?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
Q: What cars use a 5114 3 bolt pattern?
A wheel hub with 114, 3 and 5 bolts or nuts is all that a 5114 3 bolt pattern is. 5114,3 bolt designs are used by various car manufacturers and models.
Are the wheels from Honda and Toyota interchangeable?
Hello, no, your Honda rims won’t fit on your Toyota Corolla—at least not the OEM ones. The center bore on your Toyota rims is 54.1mm, whereas the center bore on your Honda rims is 56 or 64mm, despite the fact that the bolt pattern is the same. The center hole in the Toyota rims is too small for the Honda hub, thus they won’t fit on the hub.
Will Tacoma wheels fit 4Runner wheels?
Yes. Tacoma 4WD wheels typically fit 4Runner TRD Pro wheels without any issues. Because the 17″ 4Runner TRD Pro wheels are small enough to fit over Tacoma brakes, this is the reason. Remember that a Tacoma with 2WD won’t accept 4Runner TRD Pro wheels. 4×4 Tacomas use a 6 lug hub, compared to 5 lugs for 2WD Tacomas.
What kind of bolt design is a Tacoma?
The wheel bolt pattern for vehicles with two-wheel drive and models from 2000 to 2020 is five lugs, 4.5 inches (114.3 mm) high, positive offset. A 4WD vehicle has a medium offset of 6 lugs, 5.5 inches, or 139.7 mm.
Although having this knowledge is crucial, it might not be sufficient to enable you to make the necessary adjustments when you wish to change the vehicle’s tires. Because of this, we are going to give you some additional information here. For even more accurate information, be sure to take the time to search for the model year or trim model on Vehicle History.
What kind of car has a bolt pattern of 5×114?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
What vehicles feature a 6×139-7 bolt pattern?
You may find 6×139 7 bolt pattern rims on cars from a variety of manufacturers, including Acura, Cadillac, Chevrolet, GM, Ford, Hummer, Infiniti, Jeep, Lexus, Nissan, Toyota, and more, if you’re wondering what automobiles have 6×139 7 wheels. due to 6×139.
Are the five bolt patterns identical?
Even in contemporary automobile production, the five lug layout is still a typical feature for cars and light trucks, albeit each manufacturer takes a different approach. For instance, the 5×4-3/4-inch and 5×5-inch bolt patterns on General Motors wheels were both prevalent.
What other cars will my wheels fit?
You could decide to upgrade the wheels on your cars at some point. However, you might not be aware of which wheels from other cars will fit your automobile.
Fortunately, any vehicle’s wheel can be used as a replacement. The original wheel should, however, have the same bolt pattern, wheel offset, and size as the replacement.
By looking at the sticker plate on your door, you may determine the appropriate size of the replacement. Measure the wheel or get guidance from an auto retailer for a suitable replacement.
By choosing the incorrect size wheel, you run the risk of harming your car’s suspension, wheels, and brakes. You could even need to stop at the petrol station more frequently for refills.
Can any car be used with any wheel?
Simply simply, the bigger the tire, the better the traction your car has. A tire’s width affects how much surface area it covers on the road. According to iSee Cars, your vehicle has more to grab onto due to the increased touch with the pavement, which improves handling and maneuverability.
Does tire size thus actually matter? Yes, to answer briefly. But is wheel size important? It varies.
Tires and wheels are two different concepts. The wheel arrangement includes tires. For instance, even though the rims on your car are a specific size, you can buy alternative tire sizes to fit them as long as the middle of the tire is the right size. Having said that, a car with larger rims will frequently be able to accommodate bigger tires than other cars.
Bigger Wheels = Bigger Bills
In general, larger wheels and tires are preferable for improving traction on your vehicle. According to Consumer Reports, larger tires can come at a higher cost. Find the ideal balance between size and your spending limit. Even while you might not initially notice a price increase if you choose larger wheels when you buy your car, the cost of replacing larger wheels and tires will be more for you than for someone who chooses smaller wheels.
When buying replacement tires, you should stick with the tire size you’ve chosen for your car. This is because a tire of a different size might throw off your speedometer and potentially mess up the calibrations of your car’s stability and anti-lock braking systems. Both moving to smaller tires and larger tires fall under this. Altering to larger tires with an inadequate sidewall height increases the possibility of inaccurate speedometer readings while also endangering the wheels, tires, and suspension system of your car.
Your speedometer and odometer shouldn’t change, though, if you match larger-diameter wheel sizes to low-profile tire sizes. Because of this configuration, your tires’ sidewalls are shorter, which makes them stiffer and increases the risk of blowouts when you strike a pothole.
When replacing your tires, make an effort to utilize the same brand and size. If you mix and match, your car will have various tire threads, which can lead to spinouts and a loss of control.
Will a Tacoma’s 2022 Tundra wheels fit on it?
The lug holes that ring the wheel’s center, also known as the Center Bore, make up the bolt pattern, which is also known as the Tundra lug pattern. You must check that the wheels you replace on your Tundra have the proper bolt patterns for your truck. Thankfully, the new Toyota Tundra models from 2022 onward will employ the same 6 lug bolt pattern also found on the Toyota Tacoma, 4Runner, and many other Toyota models.
M14x15 Lug Nut Thread Size
How much offset are there on TRD wheels?
A TRD Off-Road 4Runner’s regular wheels have a +15mm offset. My chosen TRD wheels have a +4mm offset. This is equivalent to a difference of 11mm, or roughly 0.45 inches.
The wheels and tires are virtually 0.9 inches wider than stock due to this variance. Although not substantial, this is important. As I’ve already indicated, I believe this gives off a more forceful stance, which enhances the looks.
Some people may be shouting at me right now and telling me that I can obtain an offset of -10mm, -12mm, or even +0mm. In fact, this is true. You will, however, broaden your track so much that you might encounter rubbing.
Go ahead and look at a different wheel if you want a greater offset. There are several available. Please remember that TRD exclusively created these wheels for the 4Runner and Tacoma. They must have done some investigation into the amount of offset they considered suitable.
You push your tire outside of the fender when using a wheel with very minimal offset (negative offset), so keep that in mind. This may be attractive, but because your tire is more exposed, it may also scatter a lot of debris onto your car. I believe the TRD wheel has the ideal amount of offset.
Weight vs. Factory TRD Off-Road Wheels
The 25-pound weight of the TRD wheel is quite modest. The stock TRD Off-Road wheels that come on the 4Runner are not officially weighed, but since the TRD wheels are 0.5 narrower than the TRD Off-Road Wheels, they must at the very least be slightly lighter.
- The TRD wheels are 7 broad and 17 in diameter.
- The 17 diameter and 7.5 width of the TRD Off-Road wheels.
Well, as I just said, it results in a lighter wheel, which improves acceleration and fuel efficiency (although these increases are small).
The narrower wheel might worry some folks, including me. However, if you are using 265s or 275s for your tire size, I think it is a good thing.
The wheel may be considered too narrow if you are using a 285 size tire. Many people use TRD wheels with 285s, but I feel that they are almost uncomfortably small.
The smaller tire, however, has two key benefits for 265s and 275s: it reduces wheel weight and improves wheel protection. The benefit of a lighter tire has previously been covered, but what do I mean by “greater wheel protection”?