The 3.8 l V6 engine in a Hyundai Genesis coupe can produce up to 348 horsepower. Tuning the ECU, adding a performance cold air intake, and modifying the exhaust are some of the most well-liked performance enhancements. You may change the fuel efficiency and torque of your engine by chip tuning the ECU. Costs for performing tunes range from $400 to $800. A cold air intake system can increase your engine’s horsepower by 5–20 HP. A cold air intake is similar to this magical remedy that finally lets your engine breathe. It relocates the air filter so that cooler air can be drawn into the engine from outside the engine compartment. Getting colder air is the main goal of a cold air intake. More oxygen is present in cooler air, which increases power.
In This Article...
Engine Hyundai Genesis 3.8 V6
The 2009 Genesis and Genesis Coupe were the first vehicles to use the Hyundai 3.8 Lambda II RS MPi engine. Hyundai unveiled the Lambda II GDI version in 2012. A decent 286-348 horsepower and 264-295 lb-ft are provided by the 3.8L V6. Additionally, it is a reliable engine with good fuel efficiency. But no engine is perfect, and this is not an exception. We go over the Hyundai Genesis 3.8 Lambda engine’s issues, dependability, stats, and more in this post.
A Hyundai Genesis Coupe 3.8 R Spec’s top speed.
A base 311-horsepower V6 engine* kicks off an elite powertrain lineup, satisfying performance aficionados with copious quantities of power and torque. A 420-horsepower V8 is an option for the G80 Ultimate 5.0 for individuals who want even more power.
What kind of horsepower is a 3.8 Genesis capable of?
Intensity and Power The more potent Genesis Coupe 3.8 produces 295 pound-feet of torque at 5,300 rpm and 348 horsepower at 6,400 rpm. That is 64 and 42 more horsepower than the turbo-four and V6-equipped 2012 versions, respectively.
Is there a turbo on the Hyundai Genesis 3.8?
Beginning in April 2021, the Remnant Performance (RP) turbo kit will use two new turbochargers that RP has specially designed for this turbo kit and the Hyundai Lambda II 3.8L engine in place of the On3Performance turbochargers that were previously used. These are the choices:
- This replaces the original kit’s 72mm and 76mm On3 Performance turbos, which were introduced in 2019.
On the Genesis Coupe 3.8L, the GTX3582R and 70 Omega solutions are both properly sized for outstanding performance and quick spool. However, the 70 Omega turbo has a clear performance advantage because to its improved billet compressor wheel and ceramic ball bearings. With these adjustments, the 70 Omega turbo can spool up more quickly, develop boost more quickly, and move more air. A desirable combination for turbo car construction!
Due to these two modifications alone, the 70 Omega turbo may begin developing boost as early as 1900 RPM and gives your build 30 HP greater performance than the GTX3582R alternative. Given that Gen owners spend upwards of $1000 on catback exhausts that only produce a pitiful 12HP (max), the $595 price tag for a genuine 30HP increase (with earlier boost) is a wonderful bargain.
Even better, the 70 Omega makes advantage of cutting-edge compressor wheel and turbo housing design approaches, such as but not limited to:
- The compressor wheel’s blade density, shape, and direction
- Using a highly precise point-milling process, the airflow across the compressor wheel may be adjusted.
- Size, depth, and chamfering of the compressor inlet
- In-depth turbulence and airflow management through interior compressor housing optimization
With the use of cutting-edge geometry and aerodynamics, this mid-frame turbo can accommodate up to 1200HP on engines ranging in size from 2.0L to 5.5L. For the 3.8L Genesis Coupe, ideal!
These innovative wheel and housing design strategies are so successful that they serve as the foundation for the brand-new Garrett G35-1050, which was unveiled at SEMA in 2019. The spool time, flow rate, and performance for you of the 70 Omega simply cannot be matched by the outdated design methodologies employed in the deteriorating Precision 6266 and 6766 designs.
The original On3 72mm turbo option, which the 70 Omega this year replaces, is what the FAQ’s author currently uses. Although the 70 Omega is a much better and more modern design, both turbos offer comparable spool characteristics and power output on the 6 PSI tune for the Genesis Coupe 3.8. So let me just say that my On3 72mm update was absolutely worth the money, and if I had to do it all over again, I’d definitely get the 70 Omega!
The 70 Omega (2021 option) and 72mm On3 (my turbo) units spool so incredibly quickly and early that the car feels as like it had a supercharger. Minimal turbo lag is present. The car is eager to reach maximum boost, and I can touch full boost with ease in the low 2000 RPM range. It is incredibly exciting to drive, and I constantly advise other 3.8T owners to save their money for the faster spool since it is so worthwhile.
This is the key insight: Compared to a Dodge Challenger Hellcat and V10 Audi R8, a Genesis Coupe with a carbon fiber hood and trunk, spare tire deletion, and a 70 Omega turbo has similar power and weight. Ever wanted to compete against $70,000+ cars? Your chance is now.
How much does a 3.8 Genesis Coupe turbo cost?
A turbocharger can potentially increase your horsepower by 70–150 hp and works with the exhaust system. A supercharger adds an additional 50–100 horsepower and is directly attached to the engine’s intake.
The Genesis Coupe 3.8: Is it a nice vehicle?
Reliability. Consumer States’ December 2019 Auto Issue reports that Lexus automobiles are more dependable than Genesis vehicles based on surveys of all of its members. According to Consumer Reports, Lexus is the most reliable car. Genesis comes in fifth.
How powerful is the Genesis 3.8?
The Hyundai Genesis Coupe 3.8 V6 gets first place with a top speed of 162 mph. It is a front-mounted, 2-door RWD coupe with 2+2 seats, a 3.8-liter V6 gasoline engine.
The Genesis Coupe 3.8 is it quick?
The 2016 Hyundai Genesis Coupe is powered by a 3.8-liter V6 engine that generates 348 horsepower and 295 pound-feet of torque. a manual six-speed transmission is included.
Is the Genesis Coupe 3.8 trustworthy?
The most potent engine choice for the 2021 Genesis G90 sedan is the 5.0-liter V8. It produces a staggering 383 lb-ft of torque and 420 horsepower at 5,000 RPM.
How quick are Genesis Coupes?
N Line is your driveway. N Line is distinguished by N unique design and performance-improving components. Although the N Line vehicles share powertrains with their standard Hyundai brothers, they stand out from the crowd thanks to distinctive stylistic cues.
The best Genesis Coupe is…
This Hyundai can accelerate from 0 to 60 mph in 4.9 seconds, 0 to 100 km/h in 5.2 seconds, 0 to 160 km/h (100 mph) in 11.9 seconds, 0 to 200 km/h (124 mph) in 19.2 seconds, and the quarter mile drag time is 13.4 seconds, according to ProfessCarsTM estimates.
Which Genesis is the most powerful?
With a top speed of 240 km/h and a 0-100 km/h time of 5.4 seconds, the Genesis is a genuine powerhouse. It is undoubtedly Hyundai’s fastest vehicle and converts pure muscle into lightning-fast speeds. Additionally, the Hyundai Genesis has more than 400 horsepower for a genuinely impressive performance.
Hyundai produces a V8?
Response given by. You should budget $3,500 to $6,000 for a Hyundai Genesis Coupe 3.8 turbo package. The total cost will vary depending on a number of factors, such as where you purchase your parts, the type of kit you select, and the labor costs involved in installing it.
The fastest Genesis Coupe is from what year?
The Genesis Coupe 3.8, according to Hyundai, can go from 0 to 60 mph in less than six seconds. The Genesis Coupe is said to provide strong power with either engine, but reviews indicate that it isn’t enough to keep up with competitors like the Ford Mustang and Nissan 370Z.
Which Hyundai vehicle is the fastest?
Anyone who wants to increase the performance of their Genesis Coupe 3.8 should definitely consider installing a turbocharger.
Genesis: Is it as dependable as Lexus?
The Hyundai Genesis Coupe is regarded as having above average reliability for a luxury midsize car. It received a score of 3.5 out of 5.0 on RepairPal, placing it 16th out of the 31 models in its category. The cost of ownership for the Genesis Coupe is average.
What car has the highest horsepower?
When pushed hard, the 3.3-liter G70 will reach 60 mph in just 4.5 seconds, according to Genesis. This makes it the brand’s fastest vehicle to date, and it competes with the rival Audi S4, BMW 340i, and Mercedes-AMG C43 in terms of performance.
Which Genesis is the fastest?
By the end of 2021, Hyundai will stop producing its final V8 engine, and the new Genesis G90 premium sedan will run on electric and turbo V6 power. According to new claims from outside, Hyundai’s final V8 engine will be phased out by the end of this year in favor of smaller six-cylinder engines with turbocharging.
What does a turbo add to horsepower?
The Hyundai Genesis Coupe models, in our opinion, are a highly regarded sports coupe on the market. With far greater power and efficiency than its younger siblings, the 3.8-liter variant is by far the best in the lineup. It has all the qualities that any fan of coupes seeks: it is incredibly trustworthy, reasonably priced, and practical.
What exactly does N line mean?
Venom F5 by Hennessey John Hennessey, who developed supercars using components from a Lotus, created this hypercar. This car was intended to reach top speeds of 301 mph and had 1600+ horsepower. According to AutoWise, you can drive this automobile home after a race on the course. The starting price is $1.6 million.