The SAE 0w-20 synthetic oil that the Tacoma uses. The 3.5L (211 ci) V6 engine holds 6.1 quarts, whereas the 2.7L (164 ci) 4 cylinder engine stores 6.2 quarts (6.2 with a tow package).
In This Article...
How much oil should I use in my Toyota Tacoma?
Which is better for your Toyota Tacoma when it comes to oil changes or additions? The best oils on the market were identified because we want to ensure that you give your Tacoma the greatest care possible. Below are our conclusions.
Toyota Tacoma requires 5W-20 and 0W-20 oil, both of which are readily available on the market. Selecting an API-certified engine oil might help if you want to make sure the oil you use is good for your Toyota. Despite the fact that there are many great non-certified oils available, API certification might provide you piece of mind while lubricating your motor. The top seven oils for your Toyota Tacoma are shown below:
- Castrol Edge Advanced Full Synthetic SAE 0W-20 Extended Performance
- Extended Performance Full Synthetic 5W-20 from Mobil 1
- Advanced Full Synthetic 0W-20 Valvoline
- Platinum Full Synthetic 0W-20 Pennzoil
- Full Synthetic Shell Rotella 5W-20
- New Generation Liqui Molygen 0W-20
- SAE 0W-20 Royal Purple
You still have a lot to learn about properly maintaining your Toyota Tacoma. Continue reading to learn how to check your Tacoma’s oil, how many quarts are required, where to locate the filter, and other topics.
We hope the links provided are helpful to you before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
The Toyota Tacoma V6 uses what kind of oil?
Oil filter, hardware, and 6 liters of 5W-30 Toyota Tacoma engine oil for 4.0L V6 applications. Enhanced engine protection with Ravenol CleanSynto oil technology.
What makes 0W-20 and 5W-20 different from one another?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
What is engine oil 0W-20?
In colder temperatures, 0W-20 motor oil flows as freely as 0 Weight oil, but once the engine reaches operating temperature, it behaves more like 20 Weight oil. This guarantees that oil will begin to flow through the engine right away, lubricating important engine components even in cold weather.
The ‘W’ in viscosity descriptions does not, contrary to popular belief, stand for weight. In actuality, it represents Winter. This means that synthetic 0W-20 oil performs as a 0 Weight oil in cold areas but becomes as thick and viscous as a 20 Weight oil once the typical engine temperature has been attained.
Castrol EDGE, a cutting-edge full synthetic 0W-20 motor oil, is part of the company’s line of low viscosity 0W-20 lubricants. It is our toughest oil and is made to endure high temperatures and pressure. For those who want to push their car to the limit, it’s the perfect choice. Full synthetic 0W-20 motor oil liquid Castrol GTX MAGNATEC is designed with protective, clever ingredients that offer outstanding wear prevention.
What kind of oil is recommended for a 2019 Toyota Tacoma?
6.2 quarts of SAE 0W-20 synthetic oil are required for the 2019 Toyota Tacoma. In terms of car maintenance, performing an at-home oil change isn’t particularly challenging, but it’s crucial to be aware of a few specifics before beginning, such as your vehicle’s oil capacity and the kind of oil you’ll require.
How frequently should a 2017 Tacoma have its oil changed?
For traditional oil, Toyota suggests changing your 2017 Toyota Tacoma’s oil and filter every 3,000 to 5,000 miles. One of the most important and expensive maintenance for your car is an oil change. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles.
How long does Tacoma’s synthetic oil last?
Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. For standard oil, Toyota advises changing your 2021 Toyota Tacoma’s oil and filter every 3,000–5,000 miles.
What Are the Benefits of Synthetic Oil?
It mostly depends on the model you purchase, how the engine was made, and what is advised in the owner’s manual whether your new Toyota utilizes synthetic or traditional oil. There are advantages and disadvantages to using each type of oil, but here are a few of the advantages of synthetic oil. Before using synthetic oil, make sure to verify with the Toyota service center in your area.
- increased protection against engine wear
- Enhanced Protection for Performance and Turbocharged Parts
- Better Performance at Low Temperatures
- Synthetic Oil Maintains Cleaner Engines
- Enhanced Protection at Higher Temperatures
How Often Should You Change Synthetic Oil?
To guarantee best performance, standard oil change intervals are commonly set as 5,000 miles or 6 months. That period is increased to 10,000 miles or 12 months on Toyota cars that are required to use 0W-20 synthetic oil. Within that time frame, you should still periodically check and top off the oil level. For other models, synthetic oil is an option, and regardless of the type of oil you choose to use in those models, it is advised that you stick to the 5,000-mile/6-month intervals.
What happens if I substitute 0W-20 for 5W-20?
The 20 in 0W motor oils (also known as 0W-20) stands for the viscosity measurement value, making them appropriate for usage in 5W applications. The most important factor to match when choosing a motor oil is that value. The pumpability at cold temperatures is shown by the 0W or 5W. Consequently, a 0W would flow more freely than a 5W and might be a suitable replacement. As a result, SAE 0W-20 can be used in place of SAE 5W-20 application.
**Provides improved fuel economy and faster flow while yet offering the same level of protection as 5W.
Is 0W20 harmful to engines?
an inquiry from a reader “For my new pickup truck, the recommended engine oil is 0W-20. This is a significant adjustment for me because I have never owned a car that required anything other than 5W-30. 0W-20 oil appears excessively thin, and I have serious doubts. I requested that my dealer allow me to use at least 5W-20, but they claim that 0W-20 must be used in order to keep my warranty in effect. For my new engine, is 0W-20 safe?
Answer: Without a doubt, 0W-20 is safe for your engine. Since the beginning of the previous decade, manufacturers have required 5W-20 and 0W-20, and there is absolutely no proof that engine wear rates have gone up. Engine wear has never been lower because of the enormous advancements made in the last 15 years in engine designs, materials, and motor oil chemistry. The 5W-20 and 0W-20 grades are quickly replacing the 5W-30 grade in new cars. A brand-new car with the specification 5W-30 will be uncommon by the end of this decade. In fact, in the upcoming years, anticipate to see even lower viscosities, such 0W-16.
Why do auto manufacturers advise using thinner motor oils? merely to maximize fuel efficiency. However, this pattern has persisted long enough for us to draw the conclusion that there are no negative effects in terms of shortened engine life.
Regarding the second half of your query, which asks whether it is advantageous to use 5W-20 instead of the advised 0W-20, we see no justification for doing so. Let’s utilize the characteristics of the 0W-20 and 5W-20 AMSOIL Signature Series oils to demonstrate our point.
The measured in is the industry standard for assessing viscosity at operational temperature “at 100C, centistokes.
- 8.7 centistokes for AMSOIL Signature Series 5W-20.
- 8.8 centistokes for the AMSOIL Signature Series 0W-20.
The 0W-20 and 5W-20 are consequently nearly equal in terms of thickness or viscosity at working temperatures. Because it would provide a very minor increase in terms of cold weather start-up protection, the car maker chose a 0W-20 oil.
We choose a 0W-20 for year-round use even though our daily driver requires a 5W-20 in order to have the optimum start-up protection. Even in sweltering weather, we observe absolutely no oil usage in between oil changes.
In conclusion, you may be sure that a high-quality 0W-20 motor oil will provide the best wear control. Enjoy your new truck, and you may use 0W-20 motor oil with confidence.
Can I substitute 5W20 for Toyota’s 0W20?
One of the low-temperature grades added to the SAE J300 EOVC system after 1952 is 0W20 motor oil (0W20 oil). It is a liquid designed to behave as an SAE 20 once the engine reaches its operating temperature but flow as easily as an SAE 0 in subzero conditions.
Even at -35C/-31F, this type of oil will still start to flow through the engine’s oil channels. This oil lubricates important engine components, making it simpler for you to start your engine cold in the winter.
W20 vs 5W20 Fuel Economy
Another low-temperature grade often advised for winter use is 5W20 motor oil, with 10W-30 serving as an option for higher temperatures. Because it offers the best fuel economy, reduces fuel consumption, and produces fewer exhaust pollutants, this oil type is widely used. Motor companies and governments all around the world, led by those in Japan, Europe, and the US, are looking for 5W20.
Low viscosity, high-quality synthetic grades 0W20 and 5W20 can both significantly improve fuel economy. When employed in fair-weather temperatures, their attributes are identical. When utilized in cold temperatures, there is little to no difference between the two variants.