The 2.5L and 3.5L engines are available for the 2012 Toyota Camry. The 2.5L (153 cc) engine requires 4.5 quarts of SAE 0W-20 oil to be used. The 3.5L (211 ci) engine requires 6.4 quarts of SAE 0W-20 oil to be used.
You can use the typical SAE 5W-20 oil for one oil change if the lower viscosity oil is not readily available. Make sure SAE 0W-20 is on hand the next time you get your oil changed.
Depending on the oil you use, you need to replace your oil every 3,000 to 10,000 miles. If you use synthetic oil, you can wait longer.
In This Article...
What kind of oil is used in a Toyota Camry?
The Toyota Camry 2020 requires 0W-20 synthetic motor oil. Toyota sells an additive at Toyota dealerships that is applied to their OEM oil. However, any ILSAC-certified 0W-20 synthetic oil will function. If 0W-20 synthetic oil is not available, 5W-30 mineral oil will function in its place. At the subsequent oil change, it must be replaced with 0W-20 synthetic oil.
How often should I change the oil in my Camry?
The owner’s manual for your Camry contains a list of the precise service intervals. However, the interval for the most majority of synthetic oil situations is every 10,000 miles or 12 months*. The interval for older Camry vehicles that utilize 5W-30 mineral oil is 5,000 miles/6 months. Even in vehicles with a 10,000-mile/12-month oil change interval, other maintenance like tire rotation and fluid adjustments still needs to be done every 5,000 miles/6 months.
*According to Toyota standards, this period is reduced to 5,000 miles/6 months if you frequently make short excursions (i.e., only in cities) in below-freezing conditions or with heavy idling.
How often should an oil change be performed on a 2012 Toyota Camry?
One of the most extensive and important services for your car is an oil change. Toyota suggests changing the oil and filter in your 2012 Toyota Camry every 3,000 to 5,000 miles, but it’s important to consult your owner’s manual and your dealer to determine the intervals that are ideal for your car.
0W-20 oil: is it synthetic?
High quality base oils and potent additives are required to manufacture a 0W-20. At very low temperatures, the basic oils must still be able to protect and flow. For the oil to flow smoothly at these low temperatures, a lot of synthetic oil is typically required. 0W-20 motor oils are either fully synthetic or partially synthetic (synthetic blend) and need synthetic base oils; they are not conventional (or mineral) motor oils. And the additives must be light enough to move easily while still guarding these more modern, sophisticated motors.
Can I substitute 5W20 for 0W20?
One of the low-temperature grades added to the SAE J300 EOVC system after 1952 is 0W20 motor oil (0W20 oil). It is a liquid designed to behave as an SAE 20 once the engine reaches its operating temperature but flow as easily as an SAE 0 in subzero conditions.
Even at -35C/-31F, this type of oil will still start to flow through the engine’s oil channels. This oil lubricates important engine components, making it simpler for you to start your engine cold in the winter.
W20 vs 5W20 Fuel Economy
Another low-temperature grade often advised for winter use is 5W20 motor oil, with 10W-30 serving as an option for higher temperatures. Because it offers the best fuel economy, reduces fuel consumption, and produces fewer exhaust pollutants, this oil type is widely used. Motor companies and governments all around the world, led by those in Japan, Europe, and the US, are looking for 5W20.
Low viscosity, high-quality synthetic grades 0W20 and 5W20 can both significantly improve fuel economy. When employed in fair-weather temperatures, their attributes are identical. When utilized in cold temperatures, there is little to no difference between the two variants.
What is the purpose of 0W-20 oil?
The innovative full synthetic motor oil Mobil 1TM 0W-20 is made to help keep your engine running like new and safeguard crucial engine components for up to 10,000 miles between oil changes* while also providing superior engine protection and improved fuel economy benefits. The performance of Mobil 1 0W-20 is superior to that of our traditional and synthetic blend oils, and it meets or surpasses the strictest industry standards. Many different cars, including some high-performance ones, come with Mobil 1TM synthetic motor oil technology as standard equipment.
The 2012 Toyota Camry requires synthetic oil, right?
You’ll be relieved to learn that the 2012 Toyota Camry doesn’t require as many oil changes as some vehicles when you take a look at it. If you use synthetic oil, you can wait between 7,500 and 10,000 kilometers.
If you want to use traditional oil, Toyota advises that you change your oil and filter every 3,000 to 5,000 miles.
The good news is that there are affordable choices available to you if you don’t want to change your own oil because it is a tiresome procedure.
You can choose from synthetic, synthetic blend, or conventional oil when choosing an oil. When feasible, choose synthetic since it is the best quality. Also, keep in mind that Toyota advises using SAE 0W-20 oil wherever possible.
Do I need synthetic oil for my Toyota?
Only Toyota cars (apart from 3UR-FBE Engines*) that require 0w-20 synthetic oil have been given the go-ahead for longer oil change intervals of 10,000 miles or 12 months. (You should, though, keep checking the oil level frequently and topping off as necessary. This will enable your engine to benefit fully from synthetic oil.)
Toyota oil is it entirely synthetic?
Should I Use Which Toyota Synthetic Motor Oil in My Toyota Vehicle? Toyota Genuine Motor Oil (TGMO) is a special blend of mineral or synthetic oil base stocks that extends the life of engines and enhances performance.
Toyota uses what kind of synthetic oil?
Toyota suggests the following synthetic oil:
- The 5,000-mile service period is still present for vehicles with 10,000-mile oil change intervals. The customary 5,000-mile maintenance procedures, such as tire rotation, will still be necessary, and this is also the time to check and adjust the fluid levels, such as brake fluid.
- Even if 0w-20 oil is used, vehicles that can utilize 5w-20 mineral oil (or 5w-30) will still need their oil changed every 5,000 miles or six months.
- Regardless of the type of oil used, the engine oil must be changed every 5,000 miles if the vehicle operation satisfies the standard criteria for “Special Operating Conditions” such as driving off-road, on dirt roads, towing a trailer, making frequent short trips below 32°F, or engaging in extensive idling.
- Only Toyota vehicles (except from the 2TR-FE & 3UR-FBE Engines*) that require 0w-20 synthetic oil have been given the go-ahead for longer oil change intervals of 10,000 miles or 12 months. (You should, though, keep checking the oil level frequently and topping off as necessary. This will enable your engine to benefit fully from synthetic oil.)
*The only exceptions to this new change interval program are the 3UR-FBE (Flex Fuel Tundra / Sequoia) and the 2TR-FE (4Runner / Tacoma), both of which have not yet received approval for the 10,000-mile interval. These vehicles still need an oil change every 5,000 miles or six months. Additionally, when running on E85, the Flex Fuel 3UR-FBE needs to be driven every 2,500 miles.
To summarize, there are gray areas in the choice to utilize synthetic. Prior to making this decision, you should take the time to read and comprehend it.
Can 0w20 harm an engine?
an inquiry from a reader “For my new pickup truck, the recommended engine oil is 0W-20. This is a significant adjustment for me because I have never owned a car that required anything other than 5W-30. 0W-20 oil appears excessively thin, and I have serious doubts. I requested that my dealer allow me to use at least 5W-20, but they claim that 0W-20 must be used in order to keep my warranty in effect. For my new engine, is 0W-20 safe?
Answer: Without a doubt, 0W-20 is safe for your engine. Since the beginning of the previous decade, manufacturers have required 5W-20 and 0W-20, and there is absolutely no proof that engine wear rates have gone up. Engine wear has never been lower because of the enormous advancements made in the last 15 years in engine designs, materials, and motor oil chemistry. The 5W-20 and 0W-20 grades are quickly replacing the 5W-30 grade in new cars. A brand-new car with the specification 5W-30 will be uncommon by the end of this decade. In fact, in the upcoming years, anticipate to see even lower viscosities, such 0W-16.
Why do auto manufacturers advise using thinner motor oils? merely to maximize fuel efficiency. However, this pattern has persisted long enough for us to draw the conclusion that there are no negative effects in terms of shortened engine life.
Regarding the second half of your query, which asks whether it is advantageous to use 5W-20 instead of the advised 0W-20, we see no justification for doing so. Let’s utilize the characteristics of the 0W-20 and 5W-20 AMSOIL Signature Series oils to demonstrate our point.
The measured in is the industry standard for assessing viscosity at operational temperature “at 100C, centistokes.
- 8.7 centistokes for AMSOIL Signature Series 5W-20.
- 8.8 centistokes for the AMSOIL Signature Series 0W-20.
The 0W-20 and 5W-20 are consequently nearly equal in terms of thickness or viscosity at working temperatures. Because it would provide a very minor increase in terms of cold weather start-up protection, the car maker chose a 0W-20 oil.
We choose a 0W-20 for year-round use even though our daily driver requires a 5W-20 in order to have the optimum start-up protection. Even in sweltering weather, we observe absolutely no oil usage in between oil changes.
In conclusion, you may be sure that a high-quality 0W-20 motor oil will provide the best wear control. Enjoy your new truck, and you may use 0W-20 motor oil with confidence.
How frequently should 0W-20 oil be replaced?
The manufacturer has approved an oil change interval of 10,000 miles or 12 months for Toyota vehicles that utilize 0w-20 synthetic oil. When using this type of oil, vehicle owners should periodically check the engine’s oil level and top it off as necessary. This will enhance the effectiveness of the synthetic oil. The 10,000-mile oil change interval has NOT been approved by Toyota if you operate a Toyota Tundra or Toyota Sequoia that is fitted with a flex fuel-compatible engine.
Some engines may safely run on 0w-20 synthetic oil despite being tuned to run on 5w-20 mineral oil. Even if synthetic oil is used, these engines will still require the 5,000-mile/six-month oil change period.
Other maintenance tasks
Owners shouldn’t disregard the other maintenance requirements of their car just because it has a longer time between oil changes. Despite the fact that the oil only needs to be changed once a year, or after 10,000 miles, the 5,000-mile services are still necessary. This would cover procedures like brake inspections and tire rotations.
Toyota continues to demand the 5,000-mile/six-month interval from owners who frequently make short journeys in below-freezing weather, drive on dirt roads, off-road, or tow big loads. Even if an owner uses synthetic oil, this is still true.