Because of their svelte design and potent performance, BMWs are among the most well-known luxury automobile consumer brands.
BMWs can be expensive to purchase due to a few strange peculiarities, though. The head gasket is one issue. The head gasket in your BMW is an essential part of the engine and should be replaced right away if it is damaged.
A replacement BMW head gasket will typically cost you around $3,200. Between $2,900 at the low end and $3,600 at the high end, is the usual price range. The precise cost will vary based on the particular BMW model you own, the age of your vehicle, and the mechanic’s location.
The price of replacing a BMW head gasket depends on a number of factors. As a result, we today created this thorough essay on the price to replace a BMW head gasket. We will talk about typical costs for different BMW models as well as the price of replacing head gaskets.
In This Article...
Why Do I Need A New Head Gasket For My BMW?
The seal that the head gasket on your BMW’s engine creates between the cylinder head and engine block, along with the passageway for coolant and oil to reach the engine’s top, permits the engine to develop the proper level of compression.
The health of your BMW will suffer if the head gasket blows out or breaks, enabling coolant to enter the combustion chamber and mixing with the oil. This is especially true if you continue to drive.
Head gasket replacements typically cost between $1200 and $3000, depending on the extent of the damage and any repairs needed.
A noticeable coolant leak, low coolant levels, engine overheating, white smoke coming from the exhaust, bubbles in the coolant reservoir, and discolored oil are all indicators of a blown head gasket.
The best suggestion is to turn the BMW off, not drive it, and schedule a head gasket inspection with a repair if you suspect a blown head gasket. Otherwise, you can harm the engine permanently.
What Indicates a Poor BMW Head Gasket?
There may be no symptoms at all when your head gasket first starts to break. Before the leak reaches the engine cylinder, engine coolant route, or engine oil passage, the problem won’t be apparent.
You could start to notice that your engine struggles to start or idles erratically once the leak reaches a critical spot. Your engine may start to run hot or even overheat as a result of coolant and oil leaks.
A gurgling sound coming from the coolant reservoir and the presence of coolant in your engine oil pan are two of the most typical BMW 328i head gasket symptoms. White, sweet-smelling smoke may also come from the exhaust of a BMW with a leaking head gasket.
Your check engine light is probably going to come on when your head gasket begins to break. The engine will overheat shortly after starting once the gasket has entirely failed. Then it will stall and not restart.
How much does it cost to repair a head gasket?
A head gasket replacement typically costs between $1200 and $3000. It is simple to understand how the labor-intensive nature of a head gasket repair might result in hefty prices when the typical technician charges between $30 and $100 or more per hour.
Any vehicle’s engine is a vital component, and even little issues with it can result in costly repairs, damage, and difficulties. The cylinder head is one of the important parts of the engine, despite the fact that it is frequently defined as a single word. The engine could malfunction if the head gasket that seals it fails.
As was already said, labor accounts for the majority of the expense of replacing the head gasket. In fact, the 10+ hours it takes to complete the work can be held responsible for up to 70% of the cost. And as is the case with so many auto repairs, the price will vary depending on things like:
So how much does it actually cost to repair a head gasket? Here are some typical prices for replacing head gaskets on popular US vehicles:
The price to replace a head gasket depends on the type and make of your car. For instance, the cost of replacing a head gasket on a Subaru differs from that on a BMW, with gasket costs alone frequently being affordable. The mechanic’s long hours are what drive up the expense of the repairs. To be sure it is the head gasket, it is therefore better to spend money on such inspection.
How much does a BMW head gasket replacement cost?
Your BMW 3 Series’s head gasket maintains a seal between the cylinder head and engine block, enabling the engine to develop the proper level of compression while also allowing coolant and oil to pass through to the engine’s top.
The health of your BMW 3 Series will suffer if the head gasket blows out or breaks, enabling coolant to enter the combustion chamber and mixing with the oil. This is especially true if you continue to drive.
The best suggestion is to turn off your BMW 3 Series, avoid driving it, and schedule a head gasket inspection with a repair if you suspect a burst head gasket. Otherwise, you can harm the engine permanently.
What is the price of a BMW gasket?
At a dealership, labor costs are typically between $500 and $1,000 for a simple gasket replacement. It should cost less than $150 if you handle it yourself.
How much does a BMW cylinder head replacement cost?
The Best in Auto Repair Parts cost between $8,774 and $8,925, while labor is predicted to cost between $2,900 and $3,658. Taxes and other fees are not included in this range, nor are your particular model year or geographic area taken into account. Additional fixes could be required.
Can you operate a BMW while the head gasket is blown?
Your head gasket has failed. Driving with a burst head gasket will surely result in other car problems. Before it’s too late, K-Seal can stop the issue in its tracks.
Technically, driving with a blown head gasket is possible, but we never recommend it. So why is it such a bad idea to drive with a burst head gasket?
How long does a BMW head gasket replacement take?
How long does a blown head gasket take to repair? Depending on how severe the failure was, replacing the gasket could require anywhere from six hours to a few days. One of the worst problems a car can experience is a blown head gasket, and repairing it correctly takes time.
Is repairing a head gasket expensive?
How Much Does a Head Gasket Replacement Cost? A head gasket repair typically costs between $1,624 and $1,979 on the national average. While the materials themselves range in price between $715 and $832, the associated labor charges are expected to be between $909 and $1147.
How much does repairing a BMW coolant leak cost?
Coolant leak repairs can be very expensive. Fixing this is expensive because it is a laborious operation. The price of BMW coolant repairs varies depending on a number of factors, but it typically ranges from $750 to $1,000. Although the parts themselves are not very expensive, the labor required by mechanics means that they may charge more for this kind of repair. The type of damage and the specific fixes the mechanic needs to do determine the costs of these repairs. You can be given a few alternative solutions for resolving your BMW coolant leaks by them.
Every option has pros and cons, so you should consider them all carefully before selecting one. Prior to selecting a mechanic, you should always collect various bids. Every repair shop will impose a different fee. If it does, it’s critical to decide which solutions are best for you and your circumstances.
They will be able to assist you during the entire decision-making process because you are working with reputable automotive shops. Since this is a significant purchase, you want the greatest possible workout for the money you are spending, thus you want someone to assist you.
How much does it cost to replace the engine in a BMW 328i?
Replacement Blower Motor Estimate for a BMW 328i. Replacement blower motors for BMW 328is typically cost between $450 and $492. While parts are priced between $333 and $345, labor costs are predicted to be between $117 and $147.
Is it simple to replace a head gasket?
Even good engines can occasionally experience terrible things. When a head gasket fails, this may be the situation. The useful service life will vary depending on the design specifications and the appropriateness of the gasket material for the application. However, any application that has been in operation for a sufficient amount of time can need the head gasket replaced.
One of the more challenging engine repairs is replacing the head gasket. They necessitate extensive part removal, meticulous surface preparation and cleaning, and methodical replacement and reassembly of the engine parts. Although replacing a head gasket is rarely desirable, it occasionally becomes required.
Is replacing a head gasket a big job?
In order to replace the head gasket on the majority of cars, a sizable section of the engine must be removed. When the motor is reassembled, many of the removed parts, such as the cam shafts and timing gears, must be placed precisely where they were taken out. These factors combine to make replacing a head gasket challenging and time-consuming.
Head gasket replacement is a challenging task that ought to be left to qualified specialists. Even if you have a friend with extensive automotive knowledge, it’s a large job to entrust to a weekend mechanic since it typically requires specialized equipment and years of experience.
But there’s another query you ought to be posing:
Is there anything else I can do to get my car back on the road consistently and safely without shelling out a small fortune?
A series of solutions from BlueDevil is especially made to fix your blown or leaky head gasket quickly and effectively. The carefully formulated BlueDevil Head Gasket Sealer may stop any leak in a blown head gasket caused by wrapped or fractured heads or blocks.
For quick and effective repair of severe leaks, use BlueDevil 32 oz. Head Gasket Sealer. Your head gasket leak will be fixed using BlueDevil head gasket sealer. Get your automobile back on the road while saving hundreds or even thousands of dollars! You can purchase BlueDevil Head Gasket Sealer (Part #38386) online here or at ALL major Auto Part Retailers. Sealer for the head gasket.
For lesser leaks, use BlueDevil 16oz. An affordable do-it-yourself head gasket repair solution is BlueDevil Pour N Go Head Gasket Sealer. Pour N Go Head Gasket Sealer by BlueDevil (Part #00209) can be purchased online at this location or at MOST major auto part retailers.