Extended Performance 5W-30 Full Synthetic Motor Oil, 5 Quart, by Mobil 1 (Part No. 14977)
In This Article...
What kind of oil can I use in a Toyota Tacoma?
Which is better for your Toyota Tacoma when it comes to oil changes or additions? The best oils on the market were identified because we want to ensure that you give your Tacoma the greatest care possible. Below are our conclusions.
Toyota Tacoma requires 5W-20 and 0W-20 oil, both of which are readily available on the market. Selecting an API-certified engine oil might help if you want to make sure the oil you use is good for your Toyota. Despite the fact that there are many great non-certified oils available, API certification might provide you piece of mind while lubricating your motor. The top seven oils for your Toyota Tacoma are shown below:
- Castrol Edge Advanced Full Synthetic SAE 0W-20 Extended Performance
- Extended Performance Full Synthetic 5W-20 from Mobil 1
- Advanced Full Synthetic 0W-20 Valvoline
- Platinum Full Synthetic 0W-20 Pennzoil
- Full Synthetic Shell Rotella 5W-20
- New Generation Liqui Molygen 0W-20
- SAE 0W-20 Royal Purple
You still have a lot to learn about properly maintaining your Toyota Tacoma. Continue reading to learn how to check your Tacoma’s oil, how many quarts are required, where to locate the filter, and other topics.
We hope the links provided are helpful to you before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
A 2013 V6 Toyota Tacoma uses how much oil?
Toyota advises using only authentic Toyota motor oil when changing the oil in a 2013 Toyota Tacoma.
To make it even simpler for you, I did the research and located authentic oil and filter goods on Amazon.
For 2.7 L engines, the 2013 Toyota Tacoma requires 6.1 q of 0W-20, and for 4.0 L engines, 4.8/5.5 q of 5W-30.
In the absence of Toyota engine oil, any oil that complies with the requirements of the ILSAC-GF-5 multigrade oil can be used.
Toyota adds that if SAE 0W-20 or 5W-30 are unavailable, respectively, 5W-20 or 10W-30 may be used in their place, but only once consecutively.
Unless otherwise noted, the data presented in this article was derived from the owner’s manual for the 2013 Toyota Tacoma. You are in charge of making sure the right oil is used in your truck.
The Toyota Tacoma V6 uses what kind of oil?
Oil filter, hardware, and 6 liters of 5W-30 Toyota Tacoma engine oil for 4.0L V6 applications. Enhanced engine protection with Ravenol CleanSynto oil technology.
Can I substitute 0W-20 oil for 5w20 oil?
The 20 in 0W motor oils (also known as 0W-20) stands for the viscosity measurement value, making them appropriate for usage in 5W applications. The most important factor to match when choosing a motor oil is that value. The pumpability at cold temperatures is shown by the 0W or 5W. Consequently, a 0W would flow more freely than a 5W and might be a suitable replacement. As a result, SAE 0W-20 can be used in place of SAE 5W-20 application.
**Provides improved fuel economy and faster flow while yet offering the same level of protection as 5W.
What is engine oil 0W-20?
In colder temperatures, 0W-20 motor oil flows as freely as 0 Weight oil, but once the engine reaches operating temperature, it behaves more like 20 Weight oil. This guarantees that oil will begin to flow through the engine right away, lubricating important engine components even in cold weather.
The ‘W’ in viscosity descriptions does not, contrary to popular belief, stand for weight. In actuality, it represents Winter. This means that synthetic 0W-20 oil performs as a 0 Weight oil in cold areas but becomes as thick and viscous as a 20 Weight oil once the typical engine temperature has been attained.
Castrol EDGE, a cutting-edge full synthetic 0W-20 motor oil, is part of the company’s line of low viscosity 0W-20 lubricants. It is our toughest oil and is made to endure high temperatures and pressure. For those who want to push their car to the limit, it’s the perfect choice. Full synthetic 0W-20 motor oil liquid Castrol GTX MAGNATEC is designed with protective, clever ingredients that offer outstanding wear prevention.
Does my Toyota Corolla require synthetic oil?
At this point, all current Toyota vehicles either require synthetic oil or at least recommend it. You must reference your manual to be certain. However, if you only decide to use synthetic oil, it will be far better for your engine and will simplify everything.
What kind of oil is suggested for Toyota?
In addition to preventing corrosion and lumping, the ideal mixture of Toyota Synthetic and Mobil 1 Synthetic Motor Oil functions smoothly in both low and high temperatures. Every six months or 10,000 miles, Toyota advises having factory-trained technicians perform an oil change (whichever comes first).
How frequently should I have my 2013 Toyota Tacoma’s oil changed?
For traditional oil, Toyota advises changing your 2013 Toyota Tacoma’s oil and filter every 3,000 to 5,000 miles.
How frequently should a Toyota Tacoma have its oil changed?
For standard oil, Toyota advises changing your 2021 Toyota Tacoma’s oil and filter every 3,000–5,000 miles. Changing synthetic oil should be done every 7,500 to 10,000 miles. Remember that the easiest way to find out the appropriate intervals for your car is to consult the owner’s manual and your dealer.
The amount of oil that a 3.5 Tacoma consumes
This vehicle is propelled by a 3.5-liter V6 engine with a 6.2-quart or 5.9-liter oil capacity.
The 3.5-liter volume is actually the displacement of your engine, which is not the same as oil capacity. The cylinder volume swept by all of the pistons in a piston engine is measured as displacement.
What kind of oil does a 2019 Toyota Tacoma 3.5 need?
The name of the oil refers to how thick or viscous it is. The numbers before the W, which stands for winter, indicate the thickness of the oil at 0°F, and the numbers after the dash indicate the thickness of the oil at 212°F. The group that assigns codes to oil viscosities is known as SAE, or Society of Automotive Engineers.
Full synthetic oil contains less contaminants, better characteristics, and is created with additives that function better than regular oil.
Any full-synthetic oil with the right viscosity, such as Mobil 1 – Extended Performance 0W-20 Full Synthetic Motor Oil, would work just fine. However, Toyota explicitly advises using Toyota Genuine SAE 0W-20 Full-Synthetic Motor Oil.
A synthetic mix is an option if you’d want to save some money (synthetic motor oil may be rather pricey), but bear in mind that you might need to change your engine oil more frequently. Castrol GTX 0W-20 High Mileage Synthetic Blend Motor Oil is what we advise.
A V6 Tacoma uses how much oil?
The SAE 0w-20 synthetic oil that the Tacoma uses. The 3.5L (211 ci) V6 engine holds 6.1 quarts, whereas the 2.7L (164 ci) 4 cylinder engine stores 6.2 quarts (6.2 with a tow package).
How can you turn off the Toyota Tacoma’s maintenance-needed light?
The convenience of having a car-savvy family member must be incredible! Yes, you can manually reset your light as you are aware that your car is in good condition.
Turn off your vehicle, then push and hold the odometer reset button to turn off the maintenance light on a Toyota Tacoma. Odo/Trip is the typical label for this button. Hold the button down as you restart the ignition of your car.
Your maintenance light ought to be back on now! By starting your car as usual and waiting a few seconds, you can ensure that the light remains off. Visit a professional to ensure that your automobile and your sensors are in good working order if the light does indeed come back on.
Although automobile repairs might be expensive, Jerry can help you save money on other auto-related costs. Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. Every year, the typical Jerry user saves $879.
How much oil does a Tacoma from 2006 consume?
The owner’s manual for the 2006 Toyota Tacoma specifies that 5W-30 weight oil be used. Neither synthetic nor traditional are explicitly preferred. An oil and filter change for the 2.7L (164 ci) 4-cylinder engine consumes roughly 6 quarts. Between 4.5 and 5 gallons of oil will be used by the 4.0L (241.41 ci) V6. Four-wheel-drive and Pre-Runner models will use an additional half pint.
You might want to know if you can use a different quart of oil in your 2020 performance sports sedan now that you know the quick answer. This concise and informative FAQ will teach you more about different types of oils and how they function.