For both the 2.7 L 4 Cylinder and the 3.5 L V6 engines, SAE 0W-20 Synthetic oil is advised for the 2013 Toyota Highlander. The car has a capacity of 6.4 quarts for the 3.5 L V6 engine and 4.6 quarts for the 2.7 L 4Cylinder. Both drain plugs require a 30 ft/lbs of torque. Oil is crucial because it keeps the engine clean and functioning properly. However, it won’t last forever, so after a while, you’ll need to change the oil and filters. You should change the oil and filter in your Highlander approximately every 7,500 to 10,000 miles. A change can cost anywhere between $30 and $40 in labor charges.
The 2013 Toyota Highlander’s 2.7L 4-cylinder engine can hold 4.6 US quarts of engine oil in total (4.5 liters). The 2013 Toyota Highlander’s 3.5L V6 engine can hold 6.4 US quarts of engine oil in total (6.1 liters). For the 2013 Toyota Highlander 2.7L 4-cylinder engine and the 2013 Toyota Highlander 3.5L V6 engine, it is recommended that you only use 5W-20 or 0W-20.
If you use 5-30, you should swap it out for the suggested 0-20 because these engines have tighter bearing clearances and need it unless your motor has more than 300.000 kilometers on it.
In This Article...
What type of oil does a 2013 Toyota Highlander take?
High Mileage 5W-20 Full Synthetic Motor Oil, 5 Quart, from Mobil 1 (Part No. 120768) Product attributes: For engines with more than 75,000 miles, Mobil 1 High Mileage full-synthetic motor oil 5W-20 is made to allow up to 10,000 miles between oil changes.
A 2013 Toyota Highlander uses how much oil?
The 2.7L 4-cylinder engine in a 2013 Toyota Highlander has a capacity of 4.6 quarts, whereas the 3.5L V6 engine has a capacity of 6.4 quarts. Both engines are available, however they each have different oil capacities.
When it’s time for an oil change, keep in mind that synthetic oil is recommended for both of these engines!
While you’re hunting for your new car, check your auto insurance to make sure you aren’t losing out on any coverage (or discounts!).
The quickest and best approach to get a vehicle insurance plan that is tailored to your needs if you don’t like what you see is to use Jerry.
Jerry, a certified broker, undertakes all the legwork involved in obtaining affordable estimates from the most well-known insurance providers and purchasing new auto insurance. Even better, Jerry will do it for you and assist you terminate your old coverage!
How often should a 2013 Highlander have its oil changed?
For traditional oil, Toyota advises changing your 2013 Toyota Highlander’s oil and filter every 3,000 to 5,000 miles. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles.
How frequently should a Toyota Highlander have its oil changed?
Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. For traditional oil, Toyota suggests changing your 2020 Toyota Highlander’s oil and filter every 3,000 to 5,000 miles.
A Toyota Highlander: Does it require synthetic oil?
Oil is essential for maintaining a clean, cool engine in any car, including the Toyota Highlander. Your engine’s moving parts are lubricated, which helps to stop wear and tear.
The oil in your car is thick and cold when you first start it. As the engine warms up, the oil thins and flows more swiftly. This makes it possible for it to more efficiently lubricate the engine parts.
Toyota advises using full synthetic oil in the Highlander for maximum performance and engine protection. But which viscosity should you pick?
For newer Toyota Highlander models, Toyota Genuine full synthetic 0w-20 oil is the best option. However, it is advisable to choose complete synthetic 5w-30 oil if you have an older model with higher mileage.
Depending on the year and mileage, a Toyota repair may occasionally suggest using a complete synthetic 5w-20.
Full synthetic oil will not only guarantee that your engine is operating at peak efficiency, but it will also allow you to travel 7,500–10,000 miles between oil changes.
The normal oil can still be used, but you will need to change it every 3,500 to 5,000 miles. Additionally, synthetic oil and your engine won’t be protected by conventional oil if you drive a lot.
For more information on the recommended oil for your specific Highlander model, be sure to consult your owner’s manual or with a Toyota-certified repair. Your car can need a different type of oil depending on its year and mileage.
What kind of oil does Toyota advise using?
In addition to preventing corrosion and lumping, the ideal mixture of Toyota Synthetic and Mobil 1 Synthetic Motor Oil functions smoothly in both low and high temperatures. Every six months or 10,000 miles, Toyota advises having factory-trained technicians perform an oil change (whichever comes first).
Can I substitute 0W-20 oil for 5w20 oil?
The 20 in 0W motor oils (also known as 0W-20) stands for the viscosity measurement value, making them appropriate for usage in 5W applications. The most important factor to match when choosing a motor oil is that value. The pumpability at cold temperatures is shown by the 0W or 5W. Consequently, a 0W would flow more freely than a 5W and might be a suitable replacement. As a result, SAE 0W-20 can be used in place of SAE 5W-20 application.
**Provides improved fuel economy and faster flow while yet offering the same level of protection as 5W.
What is engine oil 0W-20?
In colder temperatures, 0W-20 motor oil flows as freely as 0 Weight oil, but once the engine reaches operating temperature, it behaves more like 20 Weight oil. This guarantees that oil will begin to flow through the engine right away, lubricating important engine components even in cold weather.
The ‘W’ in viscosity descriptions does not, contrary to popular belief, stand for weight. In actuality, it represents Winter. This means that synthetic 0W-20 oil performs as a 0 Weight oil in cold areas but becomes as thick and viscous as a 20 Weight oil once the typical engine temperature has been attained.
Castrol EDGE, a cutting-edge full synthetic 0W-20 motor oil, is part of the company’s line of low viscosity 0W-20 lubricants. It is our toughest oil and is made to endure high temperatures and pressure. For those who want to push their car to the limit, it’s the perfect choice. Full synthetic 0W-20 motor oil liquid Castrol GTX MAGNATEC is designed with protective, clever ingredients that offer outstanding wear prevention.
0W-20 oil: is it synthetic?
High quality base oils and potent additives are required to manufacture a 0W-20. At very low temperatures, the basic oils must still be able to protect and flow. For the oil to flow smoothly at these low temperatures, a lot of synthetic oil is typically required. 0W-20 motor oils are either fully synthetic or partially synthetic (synthetic blend) and need synthetic base oils; they are not conventional (or mineral) motor oils. And the additives must be light enough to move easily while still guarding these more modern, sophisticated motors.
What Are the Benefits of Synthetic Oil?
It mostly depends on the model you purchase, how the engine was made, and what is advised in the owner’s manual whether your new Toyota utilizes synthetic or traditional oil. There are advantages and disadvantages to using each type of oil, but here are a few of the advantages of synthetic oil. Before using synthetic oil, make sure to verify with the Toyota service center in your area.
- increased protection against engine wear
- Enhanced Protection at Higher Temperatures
- Synthetic Oil Maintains Cleaner Engines
- Enhanced Protection for Performance and Turbocharged Parts
- Better Performance at Low Temperatures
How Often Should You Change Synthetic Oil?
To guarantee best performance, standard oil change intervals are commonly set as 5,000 miles or 6 months. That period is increased to 10,000 miles or 12 months on Toyota cars that are required to use 0W-20 synthetic oil. Within that time frame, you should still periodically check and top off the oil level. For other models, synthetic oil is an option, and regardless of the type of oil you choose to use in those models, it is advised that you stick to the 5,000-mile/6-month intervals.
Is synthetic oil 0w20 good?
A great winter viscosity grade oil is 0W-20, which offers good engine performance and a smooth oil flow. It is perfect for cold starts and below-freezing temperatures due to its thinner oil structure. It can significantly improve the performance and vital engine components of the car in the appropriate engine.
The most important thing to keep in mind is to give your automobile some TLC by getting normal maintenance and frequent oil changes.
We provide superior ASE-certified mechanics and affordable mobile automobile repair and maintenance services to meet the demands of your car.
Share this narrative:
Which oil filter manufacturer does Toyota use?
Toyota Motor Corporation, one of the leading automakers in the world, produces Toyota oil filters. The corporate headquarters of this international corporation are located in Tokyo, Japan’s Aichi. Since its founding in 1937, Toyota has expanded to become one of the world’s major automakers, producing up to 10 million automobiles annually.
In 1924, Kiichiro Toyoda established this business, which at first produced the “Toyoda Model G Automatic Loom.” The first Toyoda-branded vehicles, however, were produced in 1933, marking the start of the brand’s auto manufacturing.
Toyota began making trucks after World War II as Japan concentrated on repairing its infrastructure. Although there were certain difficulties, the economy of Toyota has been expanding significantly.
One of this automaker’s biggest achievements was launching a number of opulent cars and becoming a strong force in the United Kingdom in the 1900s. In 1997, this manufacturer launched the Toyota Prius, the first series of gas-electric hybrid vehicles.
This carmaker experienced a 3.8% gain while leading the world in sales at the beginning of 2014. About 70 different car models, including coupes, sedans, hybrids, trucks, crossovers, and vans, are currently available under this brand.
These vehicles’ original equipment manufacturer (OEM) Toyota oil filters are available on the market as viable replacement choices. You might be interested to know that Denso, a different Japanese business, seems to produce the Toyota oil filters.
This company specializes in manufacturing several auto parts, including parts for hybrid automobiles, diesel engines, and gasoline engines. In addition, Denso produces a large variety of vehicle parts, including airbag systems, spark plugs, instrument clusters, and others.
Once more, this brand sells a variety of non-automotive goods like heating appliances for homes and industrial robots.
This company was formerly a division of Toyota when it was founded as Nippon Denso Co. Ltd. Denso broke away from the famed Toyota Motor in 1949; Toyota still owns around 25% of this business. These items support the engine according to evaluations of Toyota oil filters because they are made of high-quality filters.
Toyota oil filters don’t clog easily between oil changes and let clean oil flow through them. There are frequently noticeable differences between Toyota OEM oil filters and aftermarket alternatives, and you will find that the Toyota OEM oil filters function marvellously.