Hyundai’s Lane Following Assist uses a camera installed on the windshield to identify lane markings on a specific road. The driver will receive light steering adjustments to bring the car back to the center of its lane if the system detects that it is deviating from it.
In This Article...
SERPRESULT
This clever device continuously monitors the lane markings to the left and right of the vehicle using a high-tech sensor in the windshield to scan the road ahead.
Using a camera near the front windshield, the Lane Keeping Assist system assists the driver in steering to help keep the vehicle in its intended lane.
Assistance for Drivers
- [Lane Following Assist]: It aids in maintaining lane center by automatically turning the steering wheel.
- [Highway Driving Assist]: It helps the driver stay in the middle of the lane on the highway and keep a safe distance from the car in front at the selected speed.
It can decide the driver’s state while operating the car, phone the driver to suggest a break, or adjust the warning status display sensitivity.
- [High Sensitivity]/[Normal Sensitivity]/[Off]: By choosing sensitivity, it alerts the motorist to their level of carelessness and, if necessary, suggests they take a break.
- When driving is determined to be irresponsible, a call is placed to the driver advising them to take a break to promote safe driving.
- [Active Assist]: It aids in preventing collisions by providing warnings and vehicle control in front collision situations.
- It offers a warning in the event of a frontal collision risk.
- [Off]: It deactivates the front safety feature.
- [Assist]: When lane departure is possible, it automatically turns the steering wheel to help keep the vehicle in its lane.
- When a car leaves its lane, it sounds an alarm.
- [Off]: It disables the lane safety feature.
For blind-spot safety, you can configure video display, collision prevention, and warning assistance.
- [Blind-Spot View]: When the turn signal is in operation, it sets the blind spot display on the cluster.
How to Use the Lane Departure Warning and Lane Keeping Assist Systems
These technologies sound similar to lane centering assist but operate very differently.
shares of the news story
The lane centering assist (LCA) of the 2020 Toyota Corolla is praised by its owner for directing the vehicle between lane lines on lengthy road trips in responses to the CR survey. They stated, “This has led to decreased stress in my hands, arms, and overall while driving.” The owner of a 2020 Toyota Camry also expressed dissatisfaction with the vehicle’s aggressive lane departure warning (LDW) system. I don’t walk around the lanes of the road at random, they claimed. “If I have to change lanes, it’s because something is impeding my lane of traffic, like a bicycle,” the driver says.
When the car approaches or crosses lane lines, lane departure warning (LDW) will alert the driver visually, audibly, and/or tactilely, such as through steering wheel or seat vibrations. When the turn signal is on, these systems don’t interfere.
To help the driver keep the car in its lane, lane keeping assistance (LKA) provides steering support.
Another system, known as Lane Centering Assist (LCA), uses autonomous steering to keep the car continuously in its lane. None of these three systems is intended to steer a vehicle autonomously.
All of these lane-keeping options use forward-facing cameras to identify the lane markings close to your car. LDW and LKA are frequently “connected” to work in tandem in a vehicle. Frequently, LDW and LKA functions are enabled by default. If a motorist wants to disable them, they typically have to press a button (showing a symbol with lane lines and a car crossing a line) or choose an option from a menu in the car. While a button on the steering wheel that depicts a steering wheel with lane lines on either side is typically used to activate LCA. Many manufacturers demand that LCA be used in conjunction with adaptive cruise control.
In our poll, we asked CR members to score their satisfaction with the cutting-edge safety and driving-assistance features on their vehicles, which ranged in model year from 2017 to 2022. Concerning their satisfaction with the systems, respondents provided answers to questions. About 47,000 automobiles were covered during the survey.
A very thin majority of drivers indicated they were “extremely satisfied” with LDW and LKA, in contrast to other modern safety systems. More people expressed their favor for LCA. However, several respondents admitted to being perplexed by how lane systems operate and the distinctions between various, similarly titled systems.
How does lane assistance function?
To essentially read the road, lane assist uses a camera that is typically installed behind the rearview mirror in your windscreen. In order to get your vehicle dead center, it considers the white lines on the far and near sides of your vehicle. The camera will alert you by emitting a tone or vibrating the steering wheel if it detects that you are in danger of veering too far to the right or left.
How to operate the Hyundai Tucson’s Lane Keep Assist
Lane Keep Assist is a technology that may be installed in your Hyundai Tucson and informs you if you unintentionally veer from your lane.
As you go along the highway, you take in the stunning views to your right. You turn around after hearing a chime to find that you had started to cross the right lane markers but are now moving back into your own lane. You were being warned and pushed back by Hyundai’s Lane Keep Assist technology to avoid driving into the path of other cars.
Of course, it is your responsibility as the driver to operate your car safely, but the Lane Keep Assist system is there to assist. It helps you maintain your lane by detecting lane lines using a camera on the front windshield and by providing steering assistance.
What exactly does Hyundai Highway Driving Assist do?
By utilizing your GPS location and available highway data, HDA works in conjunction with Smart Cruise Control (SCC) and Lane Following Assist (LFA) to help you maintain a safe distance from the vehicle in front of you, stay centered in your lane, and even help ensure your vehicle is traveling at the posted speed limit.
Which Hyundai vehicles are equipped with Lane Assist?
Lane Keep Assist in New Hyundai Vehicles Hyundai will offer Lane Keep Assist for the Kona, Tucson, Santa Fe, Veloster, and Elantra vehicles in 2022.
How does Lane Assist determine which lane to be in?
A camera sensor installed behind the windscreen in front of the rear-view mirror enables Lane Keep Assist. Lane markings on the road ahead can be seen by the camera. When your car is traveling at a speed greater than 37 mph, the system is in operation.
When does Lane Assist turn on?
Yes, when the car begins, lane assist is always turned on. You may also set it to “warning only,” which will merely cause it to beep and not actually prevent you from crossing lines.
How fast does Lane Assist operate?
When you may be accidentally straying outside of identified lane lines, Lane Keep Assist with Lane Departure Warning uses a brief, gentle steering wheel shift to alert+ you so you may steer to stay safely in your lane. You might get more Lane Departure Warning notifications if necessary. If you are utilizing your turn signal or the system determines that you may be purposely leaving your lane, no alerts are issued.
How does using lane assistance feel?
There is no other way to phrase it, lane assist can be rather frustrating even if it is a fantastic safety tool. On A and B roads, though, it does occasionally bleep or vibrate the steering wheel in a way that will fast throw you off the turn. It’s fantastic on motorways.
Equally annoying is active lane assist, which at best makes the steering wheel feel fake and at worst is overpowering.
The good news is that you can always switch off lane assist and active lane assist. Depending on your vehicle, you may find it on a stalk or button close to the steering wheel. On other vehicles, it may be hidden deep within the menus of the infotainment system. Uncomfortably, safety requires that you switch it off every time you go in your car if you want it to be off.
The way lane assist works is by directing your car within the white lines on the road. However, if the road is heavily covered in snow, the system won’t be able to read the lines and won’t be able to function.
Although lane assist can be disabled, it automatically turns back on by default the moment you get inside your car out of safety concerns.
Most new cars come equipped with lane assist, a crucial safety technology that helps them earn a top Euro NCAP safety rating of five stars. In vehicles as basic as the Volkswagen Polo and Hyundai i20, you’ll find.
Your steering wheel moves when using Lane Assist.
In an effort to move the car off the line if the driver doesn’t make a quick correction, the assist function gently moves the steering wheel in the other direction. Although it is a fundamental type of autonomy, the driver can readily overrule it.
What distinguishes lane departure from lane assistance?
Technology that focuses on preventing a car from straying out of its lane is known by the names “lane-keeping assist” and “lane departure warning.” Lane-keeping assist actively works to prevent the automobile from going out of its lane, as opposed to lane departure warning systems, which just tell the driver when the car is leaving its lane. These systems are frequently included in packages with other types of technology, like adaptive cruise control and autonomous emergency braking.
Lane markings are located via a road scan by lane departure warning systems. The system alerts the driver whenever the vehicle crosses over certain marks, typically by honking or flashing a warning message on the dashboard. The driver must then take appropriate measures. If you’re shopping for a car and want to know if it has lane-departure warning, you can look up the safety ratings from the National Highway Traffic Safety Administration (NHTSA).
With lane-keeping assist, the car can guide itself in the appropriate direction, which is a step further. Some systems try to move the automobile into the proper position by applying the brakes to one side of it, but many more recent systems employ steering. The amount of steering assistance can range from light prods intended to direct the driver to aggressive interventions. A few autonomous steering systems, like those provided by Mercedes-Benz and Porsche, among others, follow moderate curves on highways or start lane changes.
Before turning over lane-keeping responsibilities to the machines, it’s crucial to understand the restrictions of your specific car because the capabilities of this technology differ from system to system. Additionally, keep in mind that none of this technology really comes close to fully autonomous driving, even if certain automobiles can steer themselves to a limited extent under specific circumstances. The purpose of these aids is to make driving safer, but they cannot take the place of a careful human driver.
How safe is lane assist?
Drivers have a safety net with Lane Assist, a sort of driving automation designed to stop such collisions and car accidents. If installed on every car, lane departure warning systems might reduce crashes in the United States by around 340,000 each year. More than merely a warning system, lane assist
Is there lane centering in a Hyundai?
Hyundai’s Lane Following Assist uses a camera installed on the windshield to identify lane markings on a specific road. The driver will receive light steering adjustments to bring the car back to the middle of its lane if the system detects the vehicle deviating from its lane.
Where are the sensors for Lane Assist located?
types of sensors video cameras with visual sensors (mounted behind the windshield, typically integrated beside the rear mirror) laser detectors (mounted on the front of the vehicle) radar detectors (mounted either behind the windshield or under the vehicle)