Infiniti G37 Maintenance: Tire Reset Warning Light for Tires (2009–2013) Nissan’s upscale brand Infiniti began selling the Infiniti G in 1990. 1990 saw the debut of the first generation, 1998 saw the second, and 2002 saw the third.
The vehicle entered its fourth generation in 2007. Since 2002, the same vehicle has been marketed in Japan as the Nissan Skyline. The vehicle gained a 3.7-liter engine, earning the moniker G37. The 3.5-liter engine was later removed. The vehicle is available as a coupe and a sedan.
In This Article...
SERPRESULT
The TPMS may need to be activated and the low tire warning turned off by driving the car faster than 16 mph once tires are inflated to the correct pressure.
TPMS Tool and OBDII Module Procedure
1. Fill up each tire to the recommended level as shown on the vehicle placard.
2. In your TPMS Tool, choose a vehicle make, model, and model year that has OBDII support.
3. From the menu on your TPMS Tool, choose OBDII.
4. Beginning with the LF tire, scan each sensor using your TPMS tool in the following order: LF, RF, RR, and LR (and full size spare if equipped).
5. After all sensor IDs have been saved, drag the cursor under the letters OBD using the TPMS Tool’s or V button. then click the enter key.
6. With the engine off, turn the ignition to the ON position (not the ACC position).
7. Connect the TPMS Tool and OBDII connector to the vehicle’s OBDII port. Ensure that the OBII Module’s green light is on and that your connection is safe.
8. Upload the sensor IDs by choosing Upload Car IDs from the TPMS Tool’s menu.
9. The IDs have been successfully uploaded when RELEARN COMPLETE / IDs UPLOADED TO CAR is shown.
10. Recheck each sensor while the engine is still running.
11. For at least 10 minutes, drive the car at a speed above 30 mph while keeping an eye on the low tire pressure monitor to make sure it isn’t blinking.
How can I manually reset the TPMS warning light on a Nissan or Infiniti?
Do you wish to reset the TPMS warning light on a Nissan or Infiniti vehicle by yourself? I’ll explain a technique to you today that doesn’t require any tools.
Here is the technique; kindly follow these steps:
Set the following tires to the following pressures in Step 1 (DO NOT SKIP THIS STEP), and you must be as precise as you can:
Locate the TPMS interface plug in step two (it is electrical taped near the OBD2 wire near where your left leg is.) Mine is attached to a wire that is blue and purple with a grey stripe.
Step 3: Insert a hard wire or another metal object—I’m using a paper clip for this—into the pin.
Step 4: If you don’t have an intelligent key, turn the key to the very last position before the engine starts. This job title is KOEO (Key On, Engine Off).
Step 5: Touch any grounded metal six times with the paper clip.
The TPMS alert light will begin to gently blink.
Step 6: The light will remain steady and you will hear a prolonged beep after about two minutes. (DO NOT TURN OFF CAR)
Step 7: The light should turn off after 15 to 20 minutes of driving (at a speed of at least 40 mph).
Step 8: Refill tires with the necessary amount of air. (It’s okay if the light blinks on and off prior to filling your tires.)
Others have confirmed that this technique works on a 2006 Frontier, 2009 Maxima, 2008 Altima, 2011 G37, 2010 370Z, and other Nissan and Infiniti models.
Why, Infiniti, does my tire pressure light remain on even when I fill my tires?
If you’ve inflated your tires, but the air pressure warning light continues to flash, your tire pressure monitoring system is malfunctioning or you have a gradual leak. A bright TPMS warning light indicates a problem with a tire pressure sensor, assuming there isn’t a leak in your tire. One of them might be damaged, the lithium-ion battery might be dead, or the TPMS itself might have an internal problem. You’ll need to get your Tire Pressure Monitoring System repaired in any of these scenarios.
Quick Tip: Recheck the tire to ensure it is inflated to the correct air pressure if the TPMS warning light illuminates again after you have inflated it. Low tire pressure indicates an air leak, which requires repair or tire replacement.
On an Infiniti G37, how do you reset the TPMS light?
When the tire pressure light blinks three times, release pressure on the TPMS reset button. For the sensors to reset, start the car and let it run for 20 minutes. The button to reset the tire pressure monitor is under the steering wheel.
How do I activate the tire pressure warning light?
- Don’t start the car; just turn the key to “on.”
- While the car is off, disconnect the positive battery cable.
- All tires, including the spare, should be 3 PSI overinflated before being entirely deflated.
- Bring your car to our service center for qualified help.
My tire pressure is fine, so why won’t the light go off?
When the TPMS warning light illuminates, proceed with caution. This indicates that at least one of your tires may be at least 25% under-inflated.
*The simplest way to get the most accurate reading is to check the tire pressure before you drive on it when the tire is “cool.” If your TPMS light is on, first check that you have correctly reset your TPMS by following these instructions.
Will my TPMS light automatically turn off if I fill my tires with air after it illuminates?
Several minutes after reinflating the tires to the prescribed pressure, the TPMS light ought to go out.
What happens if I adjust the tire pressure but the light on my tire pressure gauge still doesn’t go out?
The only place that can fix a computer issue that causes the TPMS warning light to turn ON and flash ON for one second and OFF for three seconds is the dealership service center. When the TPMS warning light illuminates and remains on, one or more tires may have low tire pressure. The light ought to go out once the tire is inflated to the recommended tire pressure listed on the door placard. Always check the pressure in all of your tires because one or more of them may not be at the proper pressure.
How long does the tire pressure light remain illuminated?
Even when the tires are in good shape, the low tire pressure light may occasionally remain on. In such circumstances, you should manually check the tire pressure to make sure there is no issue. People frequently witness this light in the coldest part of the day, the morning. However, the light occasionally turns off when the temperature rises. In any case, until the air warms up and expands, your tires may still be a few PSI under-inflated in cool weather.
A defective tire pressure sensor often exhibits three symptoms. When you discover that your tires are flat but the sensor didn’t alert you, it is the first scenario. The second sign that anything is wrong with the sensors is when your ECU turns on the TPMS light on your dashboard. When the sensor suggests that you have a flat tire when you are aware that you don’t, it is the third indication of an inaccurate alert.
After a few kilometers of driving with properly inflated tires, the sensor light typically turns off. However, you should reset the TPMS in accordance with the directions in the owner’s manual if it doesn’t turn off automatically after traveling for around 10 miles.
In 2008, the U.S. Department of Transportation mandated that tire pressure monitoring systems be installed in all automobiles (TPMS). As a result, even if you can reset it, the TPMS in your car cannot be turned off.
Technically, driving with the TPMS light on is possible, but it is not recommended. The sensor alert indicates either an under- or over-inflated tire. Ignoring this warning could result in excessive tire wear or possibly a blowout, all of which could be dangerous for you and other road users.
Will the tire pressure light automatically turn off?
Tire pressure can be impacted by overnight temperature variations or by cold winter days. The low-pressure indicator may then display as a result of this. The pressure in your tires can change by up to 10 PSI when there are significant temperature changes between day and night.
After about 20 minutes of driving, the light may turn off on its own when the right inflation level stabilizes and the air in your tires warms and expands.
In any case, you ought to have your air checked immediately. Your tires are at least 25% underinflated, according to the TPMS light. This poses a risk to your safety, especially if the load is close to your vehicle’s maximum load capacity. There is a higher possibility of tire failure, degraded handling, and increased tire wear and tear. Your fuel economy may also suffer.
Is it safe to operate a vehicle with the tire pressure light on?
You should be able to find our store or an air pump if the light just came on and you need to get there. However, it is unsafe to keep driving while the light is on. This is why: When you drive your car with low tire pressure, you accelerate the premature and severe tire wear.
Should the TPMS be reset after purchasing new tires?
After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.
Are there TPMS reset buttons on every car?
Depending on the automobile model, you may need to reprogramme the TPMS sensors when changing the tires since, if they are not calibrated to the new tires, the pressure information the sensors communicate will be erroneous. Other automobile models might only require that the TPMS be reset using the reset button.
AutoZone inspects tire sensors, right?
You can determine if your tire pressure monitoring system is corroding or failing within your wheel with routine inspection; if so, you will need to replace it. For your repair, AutoZone carries every tire pressure monitoring system item you’ll need, enabling you to drive again efficiently and safely.
What distinguishes TPMS from low tire pressure?
A tire pressure monitoring system (TPMS) is built into your car and is intended to monitor the air pressure in each tire. The Low Tire Pressure indicator on your dash goes on automatically when the system detects a low tire (it looks like a tire with an exclamation point in it). Until the tires are checked and the pressure is adjusted, this light will remain on.
On the other hand, the TPMS light is intended to turn on when there is an issue with the monitoring system itself. For instance, if a sensor in a wheel malfunctions, the TPMS light will illuminate and remain on until the issue has been resolved.
The maintenance process is not replaced by the TPMS system. Even if the indicator is not on, you should physically check your tire pressure at least once every month.
The informative nature of the aforementioned claims warrants independent verification. kindly visit our