Usually found somewhere under the steering wheel, the reset button for the tire pressure monitoring system. Till the tire pressure monitor system light blinks three times, keep the reset button depressed. The sensors should reset about 20 minutes after you restart the vehicle.
In This Article...
How To Reset The Tire Pressure Sensor On The Hyundai Sonata For Models From 2007 to 2018
Driving the vehicle for at least 10 minutes at a speed of 50 mph or higher is the simplest way to reset the tire pressure sensor on every Hyundai Sonata vehicle.
You must manually reset the tire pressure light if it remains on after 10 minutes of driving. From 2007 to 2018, all Hyundai Sonata models can be repaired using the following procedure.
Locate the TPMS reset button in step two (usually underneath or to the side of the steering wheel).
Step 3: Hold down the tire pressure monitoring reset button while waiting for three consecutive flashes of the tire pressure warning light.
Step 5: To fully reset the sensor, start the vehicle and let it run for 20 minutes.
Step 6: The tire pressure light ought to go out after the TPMS sensor has been manually reset.
How can I turn off the low tire pressure light on my Hyundai Elantra?
Your Hyundai Elantra’s TPMS is there to alert you if one or more of the tires are under-inflated, which could lead to early tire wear, tire failure, and hazardous driving conditions. The TPMS can be reset in a matter of seconds. First, without starting the car, turn the ignition to the “ON” position. Once you see the tire pressure light blink three times, push and hold the “TPMS Reset” button (located beneath the steering wheel) for a moment. Start the car and give the sensors at least 20 minutes to re-calibrate. After finishing the process, the TPMS has been successfully reset.
Hold the reset button down until the TPMS indicator light in the instrument panel blinks slowly three times. This will reset the tire pressure sensor in the Hyundai Elantra.
Is there a cover over the reset button? My 2008 Hyundai Elantra has a reset button, but I can’t seem to find it.
How do I reset the TPMS on a 2018 Hyundai Elantra?
Usually found somewhere under the steering wheel, the reset button for the tire pressure monitoring system. Till the tire pressure monitor system light blinks three times, keep the reset button depressed. The sensors should reset about 20 minutes after you restart the vehicle.
What does the Hyundai TPMS symbol mean?
The TPMS (Tire Pressure Monitoring System) is designed to notify you when a tire’s pressure is too low and may result in hazardous driving situations. If the indicator is on, your tires may not be properly inflated, which might result in premature tire wear and even tire failure. It’s critical to comprehend the value of appropriate tire inflation and how TPMS can prevent a potentially hazardous situation.
Both excessive and inadequate tire inflation can result in early tread deterioration and potential tire failure. Increased traction, early wear, and an inability to withstand impact from the road can all be effects of overinflation. The middle of the tread on tires with excessive air pressure may prematurely wear out. Underinflation, on the other hand, results in slow tire reaction, lower fuel economy, excessive heat buildup, and tire overload. The shoulders or tread edges of a tire that is underinflated will prematurely wear out on both sides.
Finding the TPMS indicator on your dashboard is straightforward if this is your first time hearing about tire pressure sensors. It is a light that has a horseshoe form with an exclamation point in the middle.
Without a reset button, how do you reset a TPMS?
The system must be put in relearn mode in order to reset the light. Make sure the tire pressures are all set evenly and according to the specifications first. To prevent the battery from going out, you might need to first connect a battery charger on low. All accessories must be turned off. After turning the key to the “On” position for 20 minutes with the engine off, drive the car at a speed of at least 16 mph for at least 7 minutes. The light will turn off once the relearn operation is complete. If the light does not turn off, the system needs to be fixed. Tire pressure sensors may need to be replaced because they can start to malfunction after 5 or 6 years of use.
The informative nature of the aforementioned claims warrants independent verification. kindly visit our
Are there TPMS reset buttons on every car?
Depending on the automobile model, you may need to reprogramme the TPMS sensors when changing the tires since, if they are not calibrated to the new tires, the pressure information the sensors communicate will be erroneous. Other automobile models might only require that the TPMS be reset using the reset button.
Where is the button to reset the TPMS sensor?
Under the steering wheel is typically where you’ll find the TPMS reset button. Consult the owner’s manual for your car if you can’t find it. All tires should be inflated to 3 PSI more than what is suggested, then completely deflated. Include the spare tire as well, as it can feature a sensor.
Should the TPMS be reset after purchasing new tires?
After changing or rotating your tires, or after adding new sensors, you should always reset your TPMS. Even after you have inflated your tires, some sensor manufacturers advise restarting the device. By teaching the primary TPMS system to identify the sensors in their new locations, resetting the TPMS is frequently referred to as retraining the system. TPMS reset procedures vary from vehicle to vehicle and typically involve a specific sequence of ignition and pedal actions, a configuration change in your dashboard menu, or the use of a TPMS Reset Tool.
Do TPMS sensors automatically reset?
Once the tires have been rotated or inflated, direct TPMS systems automatically reset. When you receive new tires, you do need to have these sensors resynchronized, which calls for a specific tool.
On a Hyundai Elantra, how do you reset the low tire pressure indicator?
You may reset the tire-pressure monitoring system in your Hyundai Elantra once you’ve found the TPMS.
The following steps will show you how to reset the TPMS on a Hyundai Elantra:
1. Turn the ignition to the “ON” position and insert the key.
2. Avoid starting the car.
3. Hold down the TPMS reset button while waiting for the tire pressure light to blink three times.
4. Let go of the TPMS button.
5. Start the vehicle.
6. Permit the sensor to reset for 20 minutes.
Your tire-pressure monitoring system will be reset by following these instructions. After putting air in your tires, it’s crucial to reset your TPMS since it keeps your knowledge of your tire pressure accurate. When your tires need to be inflated, the tire pressure monitoring system will let you know by turning on the tire pressure light.
How can I activate the TPMS light?
Turn the key to the “On” position with the engine off, but do not attempt to start the vehicle. When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the vehicle, then wait for the sensor to re-calibrate for around 20 minutes.
AutoZone is able to check TPMS sensors.
You can determine if your tire pressure monitoring system is corroding or failing within your wheel with routine inspection; if so, you will need to replace it. For your repair, AutoZone carries every tire pressure monitoring system item you’ll need, enabling you to drive again efficiently and safely.
In what location is the TPMS sensor?
The sensors are either housed in the tire pressure valve, which also serves as an antenna, or they are band-clamped to the wheel rim.
Can I drive with my TPMS on?
To avoid seeming like Debbie Downer, we’ll simply say no. Driving around with your TPMS light on is not safe. You can’t tell how quickly your tire is losing air or how long it has been over- or underinflated without doing a tire examination. The best course of action is to check the current inflation level of each tire with a tire pressure gauge.
When the tire inspection light appears while you are driving, slow down and get to the closest gas station or service facility.
What occurs if the TPMS battery runs out?
The Tire Pressure Monitoring System, which notifies you when a tire is dangerously low on air, typically uses TPMS sensors embedded in the tires to detect low tire pressure. The majority of TPMS sensors use internal batteries that cannot be changed to power them.
The lithium ion batteries in a TPMS sensor have a lifespan of 5 to 10 years. The duration of the TPMS sensor batteries is difficult to predict because it depends on how many radio frequency broadcasts the sensors send out. The amount of driving you perform over time and the conditions you drive in will affect the sensor battery life. The TPMS battery life is less affected by cold conditions than by warmer ones. When compared to continuous pace, stop-and-go traffic has a greater effect on TPMS battery life. This is due to the fact that sensors send out more radio frequency broadcasts as a vehicle changes its speed.
The system will issue a malfunction warning when a TPMS sensor’s battery runs out, which will be visible as a blinking TPMS light on your dashboard. After 60 to 90 seconds, the light may either continue to flash or turn solid. Be a repair appointment as soon as you can if you receive this warning, but also check the tire pressure in each tire right away to make sure you have safe inflation all around.
You can change each individual TPMS sensor separately if one of them malfunctions and needs to be replaced. The other sensors, on the other hand, are probably on the verge of failing as well if the failure was brought on by a dead sensor battery. You might wish to proactively replace all the sensors so you have brand-new sensor batteries all around when you take into account the time and hassle of taking your car off for a sensor replacement.
Can TPMS be re-learned without a tool?
No matter if the TPMS sensor is genuine OE or aftermarket, it must be “relearned” to the vehicle using the authorized OE relearn technique after replacement. The relearn operation is necessary to make sure that the entire TPMS system of the vehicle, not just the replacement TPMS sensor, operates properly. A TPMS scan tool is necessary to finish the car relearn operation, with the exception of some Chrysler and Mazda models that can be relearned to the vehicle through a driving method.
Before installation and relearning, some aftermarket sensors need additional programming to satisfy the vehicle’s application requirements. Sensors that are “programmable,” “universal,” or “cloneable” may be among them. To finish the procedure, specialists might also need to spend more money on specialized equipment, training, and software. Additionally, even if a shop has a tool for specialty programming, it might need to be updated to deliver the most recent software or application updates in order to match the requirements of a specific vehicle.
What is the price of a new TPMS sensor?
Replacement of a TPMS sensor typically costs between $208 and $250. Between $55 and $69 is the expected range for labor costs, while $153 to $181 is the range for part costs. Taxes and other costs are not included in this range, nor are your particular vehicle or geographic area taken into account. Additional fixes could be required.
Is TPMS on the tire or rim?
When the air pressure within the tire lowers, your car’s tire pressure monitoring system (TPMS) will sound an alarm and notify the driver. This is an electronic system that links the monitor on the dashboard of the car with the sensor that is mounted on the rim to display whether the tires are adequately inflated or not.
The TPMS will alert the driver with a flat tire warning light if the tire starts to lose air pressure. This indicates that the tire’s proper inflation level is not being maintained for whatever reason; whether as a result of tire or valve damage, the tire will need to be reinflated and repaired.
These sensors make sure the tires don’t deflate to dangerously low levels, which, if one is not careful, could further harm the tire, the rim, and even the TMPS unit. Due to this, they have been a necessary component of automobile production in the US since 2008.
The service life of tires will be shortened by rapid tread wear caused by improper tire inflation. Lower inflation extends their footprint, endangering their ability to drive safely and increasing pressure buildup while they perform, which will destroy their ability to use gasoline efficiently. The tires’ wet weather performance will also suffer from the broader footprint, which will also lengthen the distance between stops. In other words, it will harm the car’s performance and safety when driving.