- Upon entering your Hyundai, check that all of the doors are closed.
- Turn your Hyundai’s ignition to the “ACC” (accessory) position using your key.
- Keep pressing the “open” or “unlock” button on your key fob until the light on your car flashes.
- Congratulations
In This Article...
Step 3
When the car’s lights start to flash, press and hold the “Open” or “Unlock” button on the keyless entry FOB. Your Hyundai vehicle has now been reconfigured to the keyless entry FOB.
- Only Hyundai keyless entry FOBs that have already been programmed can be reprogrammed using these keyless entry FOB programming instructions.
- Toyota key
- Keyless entry FOB previously programmed for a Hyundai
- Not all Hyundai car models may be compatible with these setting recommendations. For assistance with programming a keyless entry FOB for a specific model, speak with your nearby Hyundai dealership or service center.
Can I program a Hyundai key myself, or do I require specialized equipment?
Only a specialized programming machine may be used to program all Hyundai transponder keys and remote controls. Therefore, the keys can only be programmed for you by a dealer or locksmith.
There is, however, a way to reduce the cost and make the process more accessible. You can find instructions on how to do that in the sections below. It shouldn’t need much of your time and can help you save a ton of cash.
How is a Hyundai key fob programmed?
I believed I could change my key fob’s battery on my own when it died. Even though I thought I followed the instructions precisely, my car still isn’t compatible with it. How is a Hyundai key fob programmed?
In less than two minutes, find out if your auto insurance is being overcharged.
Unfortunately, you always need to reprogram your key fob to your vehicle after changing the battery in order for it to function again. Fortunately, setting up a Hyundai key fob is really simple.
This is how to set up your Hyundai key fob:
- First, go into your car and shut all the doors.
- To activate the ACC function on your car’s ignition, use your key.
- Your key fob’s unlock button (which is occasionally also the open button) should be pressed and held down for a few seconds.
- A light will flash to signal successful programming, typically one of your car’s danger lamps.
You can now let go of the button and check your key remote! You should be prepared to move once it has synchronized with your car once more.
Jerry can be used to check if your auto insurance is current before you leave. Jerry, an authorized insurance broker, offers you a quick and simple way to compare rates from reputable companies like Geico, Progressive, and more.
It’s hardly surprising that Jerry is the top insurance app with an average annual savings of $887 in auto insurance.
Reprogramming a Hyundai key fob is possible?
In order to have a skilled technician program the key fob to your vehicle if you are buying a new Hyundai, you must go to a Hyundai service center. Although reprogramming your Hyundai’s key fob is quite straightforward, our dealership’s professionals are here to help you if you have any questions or require assistance.
Why won’t my Hyundai key turn?
If it isn’t, reopen the case and check to make sure the connections are intact and touching the battery in the proper location. Try reprogramming your Hyundai key fob after that. Hyundai key fob replacement may be necessary if the key fob is still inoperable.
I need help pairing my Hyundai key.
You must already have a MyHyundai account set up and the Digital Key app downloaded on your phone in order to use Hyundai Digital Key. If you’ve already completed these steps, make sure you have the Digital Key Smart Card that was provided when you bought your Hyundai vehicle on hand.
- Go to the Digital Key app’s primary menu.
- If your Hyundai isn’t already running, start it.
- Press the + button to begin pairing in the Digital Key app.
- Your Android device should be placed on the wireless charging pad.
- Await the phone to complete pairing.
Once you begin the pairing process, this procedure will finish on its own.
- (For Hyundai models lacking a navigation system) Choose the following choices on the instrument cluster display of your Hyundai car, in this order: Smartphone Key, Digital Key Choose, Save
- (Applicable to Hyundai cars with navigation) Choose the following choices on the navigation screen of your Hyundai vehicle in the following order: setup, vehicle, smartphone key, digital key, pick, and save
That’s all, then! The Digital Key app for smartphones is now functionally equivalent to a Smart Key fob.
Without my original car key, how can I program my new one?
- Launch Ignition. Put the key in the ignition while seated in the driver’s seat.
- Wait. For 15 minutes, the security light must be on.
- Turn on and off. After 15 minutes, the security light ought to turn off.
- Recurring Steps
How much does a new Hyundai key cost?
The brief justification is in the response below. Please see our blog post for a more thorough explanation and some GREAT INSIGHTS on how to save money: Cost of replacing car keys
A: To put it simply, replacing a Hyundai key can run you anywhere from $90 to $440. The cost you pay is influenced by a number of variables:
- The key’s kind
- The year that the vehicle was made
- The weekday, the hour (or night! ), and your location
- Where to obtain replacement keys (dealer, automotive locksmith, online, etc.)
- availability of the key-cutting code
- or not the initial ignition
The two most crucial aspects may have been the kind of key you had and the year the car was made. (chip, smart fob, push-to-start, remote, common “non-transponder” key) You should expect to pay more than $250 for a replacement key if your automobile is newer and has superior security features. For a more exact price and information, select your Hyundai model (from the drop-down box) and the type of key you had.
Can I program my own car key?
There are a few manufacturers who will let you program a single key even if you don’t have a working key. Remember that you’ll still need to have the key cut to suit the ignition, which necessitates presenting the locksmith with evidence of ownership.
Nevertheless, it is far easier to do this than to program a second or third key:
- Turn the ignition to the on position after inserting the key. Just the electronics, leave the engine off.
- After 10 minutes and 30 seconds, switch off the light by turning the key.
- Restart the key, then wait another 10 minutes and 30 seconds before turning it off once more.
- Thirdly, repeat the procedure.
- To program the key, turn it back to the on position.
- In order to test your new key, start the engine.
What is the cost for programming a key fob at Hyundai?
As previously said, cutting and programming a new key are both steps in the process of receiving a new one.
You will be charged for a service call, the key itself, the labor to cut the key, and programming when you contact a locksmith or a dealer.
Fortunately, you can acquire the key online and only have it cut and programmed, saving you money. Due to the dealer or locksmith making money by selling you the key as well, this alone will save you between $50 and $100.
True, ordering the key from Amazon may take more time, but if you are not in a rush or require a key right away, we advise you to do that. This is particularly true if you merely require making a replica.
- Make sure you order the correct key when ordering your key online. If the wrong key or remote are used, programming will be impossible. Your specific key for your Hyundai model can be found here. Simply select your desired model and year to purchase it online. Order your key right here.
- Explain that you already have the key/remote and simply need it cut and/or programmed when you contact the dealer or locksmith. Request a quote only for this operation from them.
- Additionally, keep in mind that depending on the sort of key or remote you have, the process typically costs between $80-$150.
- Finally, agree on a time to complete it with them. Don’t forget to provide them the precise year, make, and model as well as the VIN number, and make sure you have ownership documentation.
What does the Hyundai key fob’s hold button do?
What does auto hold accomplish? It prevents your automobile from rolling away accidently when it is moving or stopped, thanks to the ABS/ESC hydraulic unit.
Can an AutoZone key fob be reprogrammed?
AutoZone is truly your one-stop shop for all of your auto key needs because they specialize in creating keys for almost any make or model. You may get ordinary ignition key blanks cut for your car for between $2.50 and $6.00 if it is more than 20 years old.
AutoZone can provide you with a key and program it for your car at a fraction of the cost of a dealership if you have a newer vehicle that employs a transponder key (recognized by a black plastic key-head).
How do I connect my car’s key fob to it?
Press and hold the “LOCK” and “UNLOCK” buttons on the key fob simultaneously until the locks cycle one more to program your keyless-entry remote.
Reversing step 6 by closing the door before entering the key may help if the above method doesn’t work because some Toyotas have a different approach.
Can a key fob be programmed without visiting the dealership?
Can a key fob be programmed without visiting the dealership? Yes, you can program the key fob’s locking and unlocking features without visiting the dealership. However, you might need to visit the dealership or a locksmith if you need to program the transponder in order to be able to start the car with the key.
If I change the battery, do I need to reprogram my key fob?
After changing the battery, you typically do not need to reconfigure the key fob. However, you might need to reprogramme it by re-pairing it with your vehicle if you’ve replaced not only the batteries but also some of the internal cabling and electronics.
What should I do after changing the battery in my key fob?
The majority of people use their key fob to unlock their car doors and trunk. But what occurs if the battery runs out? You might believe that getting a new key fob requires visiting a dealership or a locksmith, but did you know that you can simply reset it yourself?
This is how:
Find the little button on your key fob first. This is typically found on the fob’s backside.
2. For around 15 seconds, press and hold the button.
3. Release the button after 15 seconds, and your key fob should be reset!
The owner’s manual for your car should always be consulted if you have any issues or inquiries.
Simply press and hold the reset button for a few seconds if your key fob has one. Remove the battery cover and press the tiny reset button on the circuit board if your key fob lacks a reset button.
Are automobile keys programmed at Home Depot?
Although Home Depot is largely a home improvement business, they also manufacture automobile keys and can program transponder keys and key fobs. The cost of keys can range from $2 to $169 depending on the make and model of your car.
However, in order to use the key duplication service offered by Home Depot, you must have a functioning car key for them to copy. The best and least expensive solution if you’ve lost your key is to go to a locksmith.