Conair introduced the Infiniti Pro Hair Dryer in 2013 as a salon-quality AC styling equipment. The AC motor of Infinity Pro is both lightweight and effective. The Infinity Pro also has a concentrator and diffuser attachment, a genuine cold shot button, three heat switches, and two speed rocket switches. Orange or violet are the available hues for the hair dryer.
In This Article...
EXTRA FEATURES
Four features of Curl Secret(r) 2.0 increase safety and reduce energy consumption: Curl Secret(r) 2.0’s anti-tangling feature is safe and simple to use when used correctly. The anti-tangle feature, however, has been created to immediately stop pulling the hair in and automatically reverse to a neutral position should improper use occur. To remove the hair from the curl chamber, simply open the handles. Auto Shut-Off: If an appliance is turned on continuously for more than 60 minutes, it will turn itself off. Simply slide the switch to the OFF position, then slide it to the appropriate setting to turn the power on if you want to keep using the appliance. Energy-saving sleep mode; after 20 minutes of inactivity, temperature falls to about 150 C/300 F. Motion Sensor: When the handle is closed, the appliance exits sleep mode and reheats to the chosen temperature. To the touch, the curl chamber will be warm. NOTICE: The new brushless motor technology in Curl Secret(r) 2.0 senses any change in speed using magnets rather than brushes and automatically shuts off as an added safety measure and to guarantee tangle-free curling action. increases curl control, reduces weight, and dramatically prolongs the life of your appliance. NOTE: Curl Secret(r) 2.0 will halt and beep to let you know you need to release the tension on the hair if you keep holding the hair section after closing the handle. The Curl Secret(r) 2.0 will once more pause and beep to let you know there is an issue if you have taken too much hair or if the hair is not neatly passing through the center of the appliance. There won’t be any tangling thanks to this safety feature.
MOST IMPORTANT: Unplug the unit and carefully work the hair out of it if hair does become tangled. One at a time, remove very little strands from the chamber slowly. If the hair is tense around the barrel of the tool, gradually and delicately release the hair with your fingers and remove little parts at a time. Make sure your fingers don’t touch the heated chamber.
The Infiniti Pro Conair is what model?
Conair’s InfinitiPRO Cool Air Styler, model CD2112. Free shipping is available on all purchases over $100! Get Free Shipping on All Orders of $100 or more.
How should my Infiniti Pro Conair Curl Secret be cleaned?
- How should my hair be styled to get the best curls? Simply ensure that your hair section is tidy, dry, and combed, and hold it straight when you insert it into the hair guide in the curl chamber.
- How will I know when to use Conair FashionCurlA(r)?
- The red indication light will blink as soon as you turn on the power. Conair FashionCurlA(r) is ready for use once the temperature reaches its predetermined point and it solidifies.
- Do I need to hold the Conair FashionCurlA(r) in a specific manner?
Yes. The curl chamber’s entrance must be facing your head. You’ll understand how that works once you perform your first curl.
- Could my long hair get tangled in the curling iron? To ensure that it doesn’t, Conair FashionCurlA(r) included an additional safety function! When it detects a tangle, the styler actually pauses. Simply let go of the thread and begin again.
- Can I style my hair with styling products while using the Conair FashionCurlA(r)?
- Yes. Conair FashionCurlA is compatible with styling products, just as conventional styling appliances (r). We do not advise using any adhesive products, even though residue can be cleaned from the equipment using the easy-twist chamber cleaning. Instead, use items like oils and sprays made to withstand heat.
- My hair is textured or curly. Do you recommend Conair FashionCurlA(r) as a style product for me? Absolutely! Any hair type or texture can be given the ideal curl with Conair FashionCurlA(r). Additionally, the tourmaline ceramic gives a stunning luster.
- How does the Conair FashionCurlA(r) return to the pre-set temperature when it is in sleep mode?
- Simply press the handles closed and then open to bring the styler out of sleep mode. The Fashion CurlA(r) will be ready for use when the red indication light turns solid.
- How do I clean the Conair FashionCurlA(rcurl )’s chamber?
- An instrument for simple chamber cleaning has been given. It’s easy. Simply place it inside the curl chamber and turn it with the handle.
- Can I apply hair extensions with the Conair FashionCurlA(r)?
- No! Some hair extensions may be damaged by high heat. Use of any hair extensions with this styling tool is not recommended.
- Is it suitable for shorter hair?
- Yes. Any length of hair that is long enough to be dragged into the curl chamber can use it.
- Does the Conair FashionCurlA(r) work on kids?
- The Conair FashionCurlA(r) is more suited to younger customers because it is a lighter and smaller device. However, it is advised to have parental supervision when using any heating appliance.
How should my Conair Infiniti Pro hair dryer be cleaned?
Your dryer requires almost no maintenance. Lubrication is not required. The dryer needs to be maintained clean in order to operate properly. When cleaning is required, unplug the cord, let it cool, and then use a small brush or the brush attachment of a vacuum cleaner to remove dust and lint from the air intake ports. Only a cloth should be used to clean the dryer’s exterior.
How is an Infiniti Pro Conair spin brush disassembled?
It most likely has hair matted to it. To unlock it, slightly rotate the top cap in a counterclockwise direction. Take off the cap and shave your head. To remove the brush and remove the remaining hair, unscrew the little bolt at the top.
How can the rear of a ConAir 1875 hair dryer be opened?
- When looking at the blow dryer from the side where the “ConAir” is visible, remove the two main screws from the back of the main handle using a Phillips Head screwdriver.
- With your fingers, pull out the back grating and remove the filter mesh from its compartment.
What caused my Conair hair dryer to malfunction?
Hair Dryer Automatically Turns Off If you use your hair dryer for longer than 7 to 10 minutes, it can switch off on its own. Remove the plug from the gadget and give it a couple of minutes to cool down, ideally somewhere cool. Return to regular usage. There may be a need to press the reset button.
Why did my hair dryer quit working all of a sudden?
Your hair dryer has most likely overheated when it cuts itself. In fact, all high-quality hair dryers feature an automated circuit breaker that switches on when the device detects a temperature that is too high. Last but not least, thermal safety is a wonderful feature because it shields your device from risky overheating, which could harm the delicate parts of the hair dryer, such the motor, which could melt.
A hair dryer’s overheating and subsequent automatic shutdown can be brought on by a number of things, including excessive device use, blocked air vents, and clogged filters. Overheating is most likely to blame if you notice that the hair dryer’s body is unusually hot or if a burning smell is coming from it. Waiting for around ten minutes usually suffices to solve the issue. Further studies, however, will be required if the failure continues or keeps happening.
Why did the brush on my Revlon hair dryer quit working?
Unreliable Plug If after numerous tries the hair dryer still won’t turn on, there might be an issue with the cable and plug. Reset the plug by pressing the reset button before turning on the hair dryer. After trying these fixes, if the dryer still won’t switch on, it could be necessary to replace the cord or plug.
How can you tell if your hair drier is malfunctioning?
Any rattling sound coming from a dryer indicates a problem. If you hear what appears to be rattling coming from your blow dryer, it is likely that the impeller, spinning blades, or dryer’s internal motor is malfunctioning. However, if something is loose, it’s an indication of wear and tear on the dryer, so you’ll eventually want to replace it. Whether something is loose, you may want to open up the dryer to examine if it’s merely loose rather than broken.
How can dust be removed from a brush?
- Warm water should be put in a basin or sink. Swish the water around after adding a few drops of mild shampoo to create suds. You can add 1 to 2 teaspoons of baking soda for more cleaning power. Stir the water thoroughly.
- Put a plastic brush entirely in water if it is made of plastic. Give it a three to five minute soak. Dip the brush bristles into the soapy water, being careful to keep the padding dry if the brush has soft cushioning at the base where the bristles attach to the brush.
- Never completely immerse a wooden brush. The wood and finish can be harmed by this. Simply immerse the brush’s bristles as previously mentioned for a brush with a padded base.
- Shake and dip the brush a few times. Oils, dead skin cells, and product accumulation will be made looser and easier to remove this way. This should get rid of the most of the buildup if your brush isn’t too unclean.
Why does my hair dryer have dust in it?
Here’s how to clean your hairdryer because you need to take care of your hairstyling supplies.
Cleaning your hairdryer only takes a few minutes. It will help you get beautiful hair and maintain your hairdryer operating at peak efficiency.
The accumulation of dust and grime close to the motor is the largest problem with hairdryers. The air is drawn in by the fan through a grill or cover at the back of your hairdryer. The same dust and debris that settles on this gets blown over your hair. Yuck, I know.
Therefore, cleaning your hairdryer is beneficial for your hair as well! Make sure you know how to clean your hairdryer and that you do it frequently if you don’t want that filth to end up on your lovely, clean hair.
Can you fix a hair dryer?
Servicing the switch, fan, heating element, and thermal cutout are frequent hair dryer repairs. On/off, fan-speed, and heat switches all function in the same way when it comes to maintenance. They regulate the current going to the elements, the fan, or the hair dryer.
Why does my hairbrush have gray fuzz in it?
Dead skin cells, sebum, matted hair, and hair product residue make up the residue that looks like grey lint in your hairbrush. As a result, bacteria are produced, gradually contaminating your hairbrush.
According to a research from the University of Arizona, hairbrushes contain about 3400 bacterial colonies per square inch. If that doesn’t make you queasy enough, consider how an average bathroom sink, which has roughly 2700 colonies per square inch, compares to an average hairbrush.