How durable are BMW brake pads? Depending on how you drive, BMW brake pads typically last between 30,000 and 70,000 kilometers. You should get an examination more frequently if you commute in congested traffic and apply the brakes frequently.
In This Article...
Temporary Replacements
The general recommendation is to replace your brake pads every 50,000 miles. But this is only a generalization, and a number of variables could change that figure.
The suggested interval between replacements may vary depending on your driving style, the brand and quality of the brake pads on your BMW, and the brake pads’ actual material. It’s advisable to discuss the ideal mileage for your particular car with a dependable repair.
When should I have my BMW’s brakes replaced?
Since BMWs are built to perform, we comprehend your desire to drive your coupe, sedan, or small SUV to their absolute limits. But it’s vital to keep in mind that how you drive has a big impact on how long your brakes last. You’ll probably need to repair your brake pads and rotors more frequently than drivers who smoothly coast to a halt if you frequently make abrupt stops. The environment you reside in also affects how well your brakes work; stop-and-go city traffic is harder on brakes than open rural roads, and hilly regions with steep downhills wear brakes out more quickly than a flat suburban landscape.
How can you tell when your BMW’s brakes need to be serviced? Brake pads should typically be replaced after 50,000 miles, but because driving styles and environments differ, it’s important to be aware of additional warning signs.
DavidZ
I’ve looked through a number of posts, and it seems like there is a significant range in terms of how long the original brake pads and rotors last. The onboard computer system informed me that I have approximately 12,000 miles left on the front and 16,000 miles left on the rear when I had 40k miles on my original pads and rotors.
Every 20k miles or so, my ancient E39 530i needed new brake pads and rotors. I don’t think my driving habits have changed.
How many miles can you get out of the F10’s brakes? The pads of the F10 probably have a different composition thanks to BMW. Compared to the very dark brake dust I had with the E39, my brake pad dust is very light.
How long do the brake pads on a BMW 1 series last?
How long do the brake pads on a BMW 1 Series last? According to BMW of Warwick, the brakes on your 1 Series should last up to 70,000 kilometers. For brake pads, 50,000 miles is about the typical mileage. Naturally, this varies from vehicle to vehicle, so you could need to replace them sooner.
How long do BMW’s 4mm brake pads last?
A set of brake pads should easily last 60,000 miles unless you use them excessively, and depending on your driving style, they may even last a little bit longer. 32k miles from the initial set of front brake pads (changed them at 4mm), and nearly 50k miles from the rears.
How long do BMW brake pads last in kilometers?
Brake pads will typically need to be replaced after 80,000 kilometers of regular driving. However, some can require replacement after just 40,000 km or 110,000 miles. It all boils down to the previously listed elements.
How many miles can a BMW’s brakes last?
The lifespan of brake pads can range from 30,000 to 70,000 miles, depending on the quality of the brake pads. Because they are denser, your rotors will last about 70,000 miles. Schedule a service appointment with us right away if you think it’s time to repair the brake pads or rotors on your car.
When should you replace your BMW’s brakes?
Depending on how you drive, BMW brake pads typically last between 30,000 and 70,000 kilometers. You should get an examination more frequently if you commute in congested traffic and apply the brakes frequently. We advise consulting your BMW owner’s manual for details on suggested maintenance intervals.
How much do BMW brake pads cost to replace?
The cost of new brakes depends on your BMW model. Depending on the brake pad material, replacement brake pads can range in price from $150 to $300 per axle on average. Your brakes’ other components, including the rotors, may have been impacted by any prior damage to the brake pads.
What type of brake pads does BMW employ?
The brake service had 1400 miles left, however it has just changed to 0 miles with a red warning signal for replacing the rear brake pads. No timer was provided. Do you suggest the genuine article or another brand? Who manufactures the authentic brake pads for the BMW f30?
Msport 320d. Do you know the name of the firm that makes the brakes for BMW? Pagid?
Jurid, Textar, or ATE are the standard pad brands. I have a set of rear TRW’s and a set of Pagids, which now appear to be out of stock from the only provider (eurocarparts/carparts4less), both of which appear to be of comparable quality to OEM pads, though I haven’t tried them yet.
I don’t believe you can go wrong with OE quality pads for everyday street use because they all have to adhere to very strict restrictions these days.
There are a lot of possibilities, but the Ferodo’s or Textar’s here seem like good ones:
Yes, Textar is created in Germany for BMW as aftermarket pads bearing the Textar brand as well as official BMW pads. Additionally made in Germany are Pagid and Mintex, which I believe are exclusively sold by the same businesses, ECP and carparts4less.
Cleckheaton used to produce Mintex (Mintex-DON/BBA Friction). Although I’m not sure if they still manufacture anything, they still maintain a factory there.
In the past, I have discovered that scheduled service parts are frequently priced competitively by franchised dealers. Although the local BMW dealer’s TurboPower oil is decently priced, they once tried to charge me PS7 every brake bleed nipple for a MINI R50. The same item cost 10 pounds on eBay from a brake expert.
I persuaded BMW Bowler Blackburn to match the price Doncaster BMW was asking for them on eBay (PS75). additionally a PS30 brake wear sensor I’m aware that they are PS10 on eBay, but I got tired of the grating dash warning.
Why do BMW brakes work so well?
The brake pads designated as authentic BMW parts are expertly made to be compatible with the BMW model you own. They are created using materials and procedures that adhere to the highest standards of quality with an eye toward safety and durability. To dispel uncertainty, BMW maintains an online tool that enables you to view the original brake specs for each model separately. Even one BMW component with a poor fit can result in problems and premature wear. These elements may cause brake failure or subpar system performance.
BMW use ceramic brake pads, right?
M Performance Brakes for BMW If you operate one of these potent thrill vehicles, you can fit it with either the base set of M brakes, the BMW M Compound Brakes, or the optional Carbon Ceramic Brakes.
Does BMW need me to replace my rotors with pads?
It is typically a good idea to just change the rotors at the same time because of the typical amount of mileage we get from the OEM pads. If not, your new pads won’t last long before your rotors have reached the minimum wear level and need to be replaced. Normally, replacing rotors rather than pads is a terrible idea.
How can I tell if my brake pads need to be replaced?
If you push the brake pedal and hear a grinding or screaming sound, the brake pads may be entirely worn out. This could be because you can hear the metal plate on the brake pad pressing against the metal brake rotor when the brake pad material is fully gone.
Metal rubbing up against metal will sound awful, as you might expect. It’s time to examine your brake pads if you hear a terrible screech when you brake.
What happens if brake pads aren’t changed?
The moving parts in your car’s brakes are interconnected, so when one portion wears out, it may affect other parts of the system.
For instance, you run the risk of harming the brake rotors when your brake pads wear past a certain point. To stop your car, the brake pads crush the rotor when you press the brake pedal. When the pads are too worn out, however, the exposed metal rubs against the rotors each time you brake, creating a grinding sound and perhaps harming the rotors.
Furthermore, the heat produced by the metal-on-metal grinding that occurs when worn pads pressure the rotor can cause the rotor to distort and shatter. Brake rotors typically last longer than brake pads do. But delaying the replacement of your brake pads might harm these components, necessitating more frequent repairs.
You can extend the life of all of your braking system’s components and prevent costly and avoidable brake repairs by having your brake pads changed and your brake system examined on a regular basis.
How do I know when to replace my brakes?
- Brakes Making a Squealing or Squealing Noise
- Symbol Light comes on.
- Deep Metal Sound with Grinding.
- The brake pedal vibrates.
- Less Than A 1/4 Inch Thick Brake Pads
Should all four brake pads be changed at once?
You are staring at a brake pad that has worn out completely. But should you replace all four brake pads at once?
First things first, you should replace either the front or the rear brake pads simultaneously. One should be wearing out roughly at the same rate as the other unless there is a serious problem. But not all four brake pads necessarily follow that rule.
Should brakes be replaced at 30%?
Measure the remaining thickness with specialized measurement equipment to evaluate whether pads need to be replaced. While the brake pads are still inside the caliper, these instruments detect the thickness. Use a small ruler or tape measure instead if you decide to remove the pads.
If a brake pad’s thickness is 20% or less of the new pad, replace it. The pad is substantially less effective with 80% of it worn away. Avoid doing this, particularly during an emergency halt.
Do BMWs cost a lot to maintain?
BMWs are by far the most expensive car manufacturer to repair, claims Your Mechanic. The competition is not even close. With an average maintenance cost of $17,800 over ten years, BMW comes in #1. Mercedes-Benz came in second with an average maintenance cost of $12,900 during a 10-year period. In contrast, the typical Toyota only cost $5,500 to maintain during a 10-year period because they are recognized for requiring less maintenance.
According to Your Mechanic, such high maintenance costs are usual in German premium vehicles. Audi comes in sixth with an average $12,400 maintenance expense over a 10-year period. This is primarily a result of the pricey, high-end parts that these luxury vehicles require. Naturally, it will cost a lot of money to fix those pieces when they break or need maintenance.
However, while being premium vehicles, they also have ongoing problems. For instance, according to Your Mechanic, a BMW is four times more likely to not start than a typical automobile. It was ranked seventh overall as a result. Additionally, the window regulator on the BMW required replacement 18 times more frequently than the window regulator on the ordinary car.
How much ought a complete brake job to run?
A brake job on your automobile might cost you anywhere from roughly $140 to $1000 or more each axle when you take it to a repair. There are a number of reasons for the price disparity, including:
- Your vehicle’s make, model, and type
- What the brake service package and related warranty cover
- Cost variations for parts and labor
- Taxes, levies, and shop fees that vary
The typical estimated prices for replacing brake pads and rotors from several online authorities are listed below. It is safe to presume that these ranges apply to the majority of on-road cars. Brake replacement costs are often higher for luxury and performance automobiles.
While these ranges are a good place to start, their wide range makes it impossible to predict how much you will really pay for brake servicing on your car. We contacted hundreds of repair shops around the country, including well-known brands like Midas, Meineke, Firestone, Pep Boys, Christian Brothers Automotive, and Jiffy Lube, to learn the prices they charge for brake pad and rotor replacement. (Take note that since they don’t actually sell brakes, Walmart and Costco didn’t make the list.)
Continue reading to find out what we discovered regarding the price of brand-new brake pads and rotors, as well as what causes the price variations.