Although pre-programmed for your car, your key still needs to be activated in order to be used.
Hold your new key fob flat on the dim battery indicator next to the steering column to accomplish this. After then, keep pressing the start/stop button until the “no key” warning light goes out. To check that activation was successful, press the start/stop button once more.
If this doesn’t work, you might need to activate your new key while removing your old key fob from the signal range to avoid interference. To accomplish this, first unlock your BMW with the existing key before having someone carry the key a short distance away from your car. After that, you can push the start/stop button while holding your new key against the steering column.
In This Article...
Safe and dependable
Because client safety is our top priority, we don’t fill orders without proof of vehicle ownership. You must send a copy of your driver’s license and vehicle registration after placing an order and paying for it. To see a list of acceptable documents, consult our document guidelines.
BMW makes each key fob to order. Since each new BMW key produced through key replacement by VIN is distinct, per BMW policy, they are totally non-refundable and cannot be canceled or returned.
Frequently Asked Questions
- Can my damaged BMW key be repaired?
- The BMW key shell frequently ages or sustains damage over time. You can swap out the shell for a new BMW Key Shell if the key is still functional. Purchasing a new BMW key is much more expensive than doing this.
- How can I obtain a new BMW key?
- Any BMW dealer will be happy to order you a new key. Without taking the car to the dealership, you will need to present identification and evidence of ownership.
- How is a new BMW Key programmed?
- Your vehicle should already be pre-programmed into your BMW key. It only needs to be inserted once to turn the car on. Few new BMW keys might need to be programmed.
- Do I require a new key or can I just change the batteries in my keyfob?
- Some BMW keys include batteries that can be recharged. Even these batteries expire eventually. The purpose of these keys was not to be serviced. The salespeople at BMW stores will advise you to get a new key. The good news is that the battery can frequently be changed, and even these keys can be used to access things. Instead of spending $300+ on a new key, it is much less expensive to open up the shell and change the battery.
- Can a locksmith duplicate a BMW key?
- Making a BMW key is difficult, and unless the BMW is an older model, most locksmiths won’t be able to. For specific BMW models, a locksmith utilizing an AK90+ Key Programmer from eBay can make a duplicate key. The CGDI Prog BMW MSV80 Auto key programmer on eBay diagnosis tool with IMMO Security is another instrument that locksmiths frequently employ.
How can I obtain a second BMW key?
- Go to a nearby BMW shop like BMW of Bloomington.
- The 17-digit VIN number of your car, which can be located in the driver’s door jamb or close to the front of your windshield, will be required by the technician.
- To have BMW mail you the replacement key, you’ll have to pay a charge.
What is the price of a BMW key?
Dealer:
The automobile will need to be towed to the dealership in order for these sorts of keys to work because they need to be programmed in order to start the vehicle.
vehicle locksmith
A typical automobile locksmith does not have the tools and keys needed to create new BMW key fobs or transponders. Consequently, the dealer is your only choice.
Is it possible to steal a BMW without a key?
Yes, keyless autos are frequently more difficult to steal. Having said that, it also relies on the situation and the specific model. Some versions include keyless entry, which opens the doors when the key is nearby, but they still require a traditional key to start the vehicle. Keyless entry and keyless start vehicles are the most susceptible to relay theft.
Relay theft is also not a recent occurrence, therefore manufacturers have been working on solutions to stop it for some time. As a result, some more sophisticated vehicles include features built to prevent keyless auto theft.
The cost of a BMW key fob
The price of a 2020 Toyota Sienna fob was comparable. Dealers, however, gave prices as low as $150 to replace a key fob for a 2017 Honda Accord. A number of BMW retailers claimed that the additional security features built into the 2020 X5 key fob justifies the roughly $500 they spend to replace and program one.
What is the price of a BMW display key?
We had the chance to experiment with BMW’s newest keyfob at the media debut of the 2016 BMW 7 Series. The touch-sensitive key, also known as the BMW Display Key, is an optional accessory for the new 7 Series and is just $250 in the United States. The key has four buttons on the front for lock, unlock, trunk release, and panic for that small price—which is less expensive than many other BMW keyfob replacements.
The key has a full color touchscreen in the middle that allows you to swipe through various features, such as door locking status, toggle lighting, fuel range, and climate control scheduling. Although the U.S. regulatory bodies have not yet approved it, the BMW Digital Key can be used to self-park your 7 Series in Europe.
According to BMW, the key’s battery lasts for around a week and can be wirelessly recharged in the armrest of the vehicle. Even if the touchscreen is broken, you can still open the car with the key.
It’s incredible what BMW has accomplished with something we always considered to be a simple tool, and we anticipate that keyfobs of the next generation will become much smarter.
How much does a new BMW key fob battery cost?
I recently visited the business. The key fob wouldn’t work to lock or unlock my car when I tried. My BMW key fob’s battery has to be changed.
In less than two minutes, find out if your auto insurance is being overcharged.
Batteries for key fobs typically last three to four years. Your current BMW key fob might need to be replaced, depending on the model.
You should replace the battery in your smart key or Comfort Access BMW key fob by following these simple instructions:
- Get a CR2032 battery from a department or auto store. It will cost you around $2 to buy it.
- By depressing the tab on your key fob, you can take the valet key off.
- To pry open your battery cover, use the key or a flathead screwdriver.
- Replace the old battery with the new one after removing the old one.
- Restore the key to its housing and close your key fob.
You have a non-comfort access key fob if you are unable to open it because it has an indent in the side. You must take a long drive to recharge your key fob battery because it can only be done through the ignition of your automobile.
Once the battery has been successfully replaced or recharged, make sure to test it by locking and unlocking the doors several times. To find out how much you can save on your auto insurance before you leave again, take a moment to glance at the Jerry app.
The Jerry app, a registered broker that provides end-to-end support, compiles reasonable rates, assists you in switching plans, and even assists you in terminating your old policy.
Can a BMW key fob be tracked?
Nope. There is nothing you could do to make the fobs detectable even if there was a means to start reverse communication because they lack a speaker.
How much does programming a BMW key fob cost from a locksmith?
The price to reprogram a fob is determined by a number of factors. Although it’s difficult to provide a general price, reprogramming often costs between $50 and $250. Here are some elements that can affect price:
- Type of Fob: Reprogramming smart keys with a transponder (RFID), keyless ignition, or other additional features is typically more expensive.
- Vehicle Brand: Manufacturer-specific fob complexity varies. Some automakers make it more difficult to reprogram keys.
- Vehicle Model: Within a given automaker, some models feature key fobs that are more complicated than others.
How should I proceed if I misplace my key fob?
You can start your car by inserting the industry-standard key into the ignition cylinder and turning it.
If you misplace it, you can call a locksmith, who will be able to make you a new key right away. A locksmith might not be able to help in some situations, such as with a unique or vintage automobile. It’s possible that you’ll need to purchase a new ignition lock cylinder and key from the dealer or an unaffiliated repair facility.
How can I acquire more key fob?
You can replace your key fob at either a car dealership or a locksmith.
Unfortunately, it happens frequently that a car dealership will hire a locksmith to replace the keys you supplied to them before charging you. Therefore, even though a car dealership will sell and program the automobile key fob for you, the cost will be high.
The locksmith is the finest option. The services you require will be reasonably priced and produce excellent outcomes. Recognize that there is no need for you to visit the dealership for any requirements.
Vehicle key theft is a crucial task for a locksmith. You want to be sure that only you can operate your vehicle. If necessary, the locksmith will have to reprogram your keys because of this.
Can I change a key fob on my own?
You might be able to program a replacement yourself, depending on the make and type of your vehicle.
The steps for programming a key fob yourself can differ: Owner’s manuals from certain automakers include instructions. In many circumstances, information can be available online. The catch is that in order to complete the process quickly or at all, you might need two functional key fobs.
Therefore, it is wise to acquire and set up an extra remote before you require it. Additionally, it’s a wise move because most used-vehicle buyers, particularly auto dealers, would pay extra for a car that has at least two functional sets of keys or key fobs. Therefore, having a spare key will not only be useful when you need it, but it will also benefit you in the long run.
Can I program my own car key?
There are a few manufacturers who will let you program a single key even if you don’t have a working key. Remember that you’ll still need to have the key cut to suit the ignition, which necessitates presenting the locksmith with evidence of ownership.
Nevertheless, it is far easier to do this than to program a second or third key:
- Turn the ignition to the on position after inserting the key. Just the electronics, leave the engine off.
- After 10 minutes and 30 seconds, switch off the light by turning the key.
- Restart the key, then wait another 10 minutes and 30 seconds before turning it off once more.
- Thirdly, repeat the procedure.
- To program the key, turn it back to the on position.
- In order to test your new key, start the engine.
Can a key fob be programmed without visiting the dealership?
Can a key fob be programmed without visiting the dealership? Yes, you can program the key fob’s locking and unlocking features without visiting the dealership. However, you might need to visit the dealership or a locksmith if you need to program the transponder in order to be able to start the car with the key.