For your 2003 Nissan Altima, we now offer 12 Starter items to select from, with prices ranging from $126.53 to $243.00.
In This Article...
What is the price of a Nissan Altima starter?
Estimated cost of replacing a Nissan Altima starter. Replacement starters for Nissan Altimas typically cost between $394 and $572. The cost of labor is expected to be between $87 and $110, and the cost of parts is between $307 and $462.
What might prevent a 2003 Nissan Altima from starting?
I’m sorry to hear that your Nissan Altima is having difficulties starting. Your Nissan Altima won’t start for a few different reasons. The most frequent causes are a dead battery, a broken alternator, or an issue with the engine starting.
Typically, an electrical component of the automobile, such as a dead battery or a damaged alternator, is to fault if your Nissan Altima won’t start.
If you think the battery is to blame, you can check its voltage at home using a multimeter to validate your suspicion. Your automobile battery is alright if you receive 12 to 13 volts, and the problem is somewhere else. The battery needs to be replaced if the voltage falls below 12.
The following are some more frequent causes of a Nissan Altima not starting if the battery is in good condition:
- defective starter motor
- fuel pump malfunction
- Battery deterioration
- Key fob battery failure
- faulty alternator
- inadequate alternator
- worn-out ignition plugs
You should take your car in for service right away to address the problem and stop more harm from occurring to your vehicle.
While taking your car in for maintenance is a terrific method to keep safe, getting excellent car insurance coverage at a reasonable price is the greatest way to make sure you’re covered. Jerry can assist!
On a Nissan Altima, how long does it take to replace the starter?
Depending on where the starter is located in your engine, replacing one will take anywhere from two to four hours.
Some engines have starters that are easier to access than others. To get that starter, a mechanic might need to scrounge around and remove certain components. If so, a 4 hour time limit would likely be more appropriate than a 2 hour one.
Download the Jerry app to see if you’re overpaying for auto insurance as you wait for the technician to finish. We warrant that replacing your starter will be much quicker!
Simply spend a minute to respond to a few questions, and Jerry will do the rest of the work for you. To find you the greatest bargain, they’ll create competitive quotations from top insurance companies. When a customer shops with Jerry, they often save over $800!
Something sounds off.
When you turn the key or press the start button, there may be a clicking sound, which is one of the signs of a defective starter. However, a starting can stop working altogether or make noises that signal its approaching demise, such as buzzing and grinding. Oh, listen!
You’ve got lights but no action.
You may have a problem with the starter if you try to start the engine and the dashboard illuminates but nothing happens to the engine.
Your engine won’t crank.
Even after attempting a jumpstart, does your engine still not start? At this point, you should dial a towing service and drive your vehicle to the closest Firestone Complete Auto Care. Nothing else than a qualified technician will start your engine if a jumpstart doesn’t work.
Smoke is coming from your car.
The starter is a component of your car’s electrical system and is vulnerable to short circuits and blown fuses. Your car’s starter may overheat if you’ve been trying to start it for a long time, which increases the likelihood of electrical problems and the accompanying smoke. Call for assistance if you see or smell smoke instead of twisting the key more.
Oil has soaked the starter.
If your vehicle has rear-wheel drive, the starter is often located on the passenger side of the engine, directly below the exhaust manifold. If it is a front-wheel-drive vehicle, look above the transmission on the driver’s side or under the exhaust manifold. On some automobiles, they may also be found just beneath the intake manifold. If you open the hood to discover that your starter is covered in engine oil, your broken starter may be a sign of an oil leak, which is another issue. Keep an eye out for oil leaks to prevent starter problems of this sort because, regrettably, what begins as a few droplets of oil can steadily and often unnoticeably evolve into a costly problem.
How can you identify if the problem is with your starter or battery?
Let’s start by diagnosing this problem since it is the least expensive and easiest to replace. Does the car make a clicking noise when you try to start it, but it won’t turn over? That might be encouraging. A dead battery is likely the culprit if a jump starts the car but it won’t start once it is turned off.
Why did my car battery die?
Consider checking to see if you may have left the vehicle’s interior or exterior lights on or if a door may not have closed all the way. We’re confident you already did this as soon as the problem began. Open the hood and inspect the battery terminals if the problem wasn’t caused by the lights. You may only need to give the terminals a brief clean with a toothbrush and some baking soda solution if you notice corrosion (a white powder-like substance) there. Still not an issue? Think about the battery’s age. The average automobile battery lasts 4-5 years. Have your problem diagnosed as soon as possible if your battery is less than four years old and has no other problems. If the problem is with the battery, you might be covered by a warranty and be able to get a replacement. If the diagnosis reveals that your battery is in good condition, the problem may be with the alternator.
The next step is to inspect the alternator if there doesn’t appear to be anything wrong with your battery yet it won’t maintain a charge.
How can I tell if the starter on my Nissan Altima is damaged?
To start your Nissan Altima, the starter motor turns the flywheel, which produces electricity. Your Altima may not start if the starter motor is damaged or malfunctioning. A faulty starter motor typically makes a clicking or grinding sound made of metal on metal. These are important warning signs that your starting motor needs to be changed.
Why do all the lights come on yet my car won’t start?
If your headlights work but your car won’t start, your battery is charged but the starter or ignition isn’t working properly. A starting engine can be jumped using a charged battery if the starter or ignition is the issue.
How do you start a Nissan Altima manually?
Put the key fob in the port if your Nissan car, truck, or SUV has one, then push the START/STOP button while tapping the clutch or brake pedal. Simply step on the brake or clutch while pressing the key fob against the START/STOP button if your Nissan doesn’t have a port.
How is a starter tested?
Connect the solenoid (smaller wire) connector on the starter and the battery positive terminal on the remote starter switch, then turn the switch. If nothing transpires, your starting is subpar. If the starter engages, the electrical system is at fault.
How much does it cost to replace a starter?
A brand-new starter might run you $50 to 350, and labor from a skilled mechanic could cost you $150 to 1,100. A poor starting motor replacement could cost anything from $200 to $1450 overall.
These numbers, however, can be lower if you can spot problems with the car starting at an early stage. By purchasing a rebuilt starter rather than a new one, you could also save a lot of money.
If the starter of your car suddenly stops working, you could also have to pay to have it towed to a shop unless you can arrange for a mobile technician to come to your house instead.
Let’s look at the variables that affect these pricing estimations now that you have a general idea of the average starter replacement cost.
How can you tell if a starter is failing?
Still, keep an eye out for these seven indications that your starter is failing.
- #1: The Engine Won’t Start.
- #2: Loud, grinding, or whirring noise.
- #3: Occasional Trouble Starting the Car.
- #4: The Starter Continues After the Start.
- #5: Smoke.
- #6: The starter engages but the engine won’t turn over.
- 7. Battery
What transpires when a car’s starter fails?
It frequently makes a grinding noise when the starter drive gear is worn out or not engaging properly. This sounds a lot like the sound you make when you unintentionally turn the ignition switch back on after starting your car. The engine flywheel could be harmed if the grinding symptom is ignored.
Will your automobile start if the starter is damaged?
Your automobile may frequently not start because of a weak or drained battery. Giving the starter enough amps will enable it to operate normally, which will cause the engine to start.
You can either use a portable jump starter or the battery and jumper wires from another automobile to jump-start a vehicle.
What you should do next is as follows:
- Locate the automobile battery by lifting the hood of your vehicle. Consult the car’s handbook if you can’t find it. Don’t work on your automobile battery if it appears bloated or is dripping. Instead, give a mechanic a call because the battery could need to be changed.
- If the car battery appears to be in good condition, connect the positive terminal of your weak battery to the positive terminal of the backup battery or jump starter using the positive wire (red jumper cable).
- Connect the negative terminal of the charged battery to any exposed metal on the vehicle using the black jumper cable.
- Now start the engine and wait for the battery to charge for a few minutes.
Depending on the engine type, DOD, and battery condition, a dead battery may take between 5 and 20 minutes to start up.
Detach the jumper cables once you’ve successfully started your automobile with a jump. The (-ve) clamp comes first, followed by the (+ve). Ensure that none of these cables touch one another as well.
Note: A broken starter may be to blame if your battery is charged but your car still won’t start. The starter relay can thus be disregarded.
There is also another, more straightforward method you can employ as well: