The Tire Rack sponsors the Wheels and Tires topic. By purchasing tires from the above link, you can directly support e90post. For each purchase made using the link, e90post receives sponsor funding to maintain the website. Disclaimer
Hey guys, I’m not too knowledgeable with rims. My question was whether the 2009 E63 AMG rims would fit on the 335i coupe because I have no idea how the sizing works.
Simply purchase the M6 Reps, which have the same basic design but look significantly nicer. AMG Eff
Beemercedes. Interesting, huh? I never anticipated hearing that (the Mercedes component on BMWs). However, I’ve seen Toyotas with VTEC insignia. or Fords with Mugen decals. I’ve seen Hondas with Isuzu engines. Maseratis with Ferrari powertrains. I’ve even seen Honda motors in Saturn Vus! Nissan employs the electric motor from Toyota. Did you know that it was possible to practice Scientology and be a Christian at the same time? BUT that’s false dude, I’ve never seen Mercedes wheels on a BMW!
In This Article...
Hi,
I have a 20-piece set “I now have alloy wheels on my M3, but I want to keep them so I can use them on the next vehicle I buy. Do you know of a bolt that will convert a BMW wheel (HRE P40 20) to a another manufacturer’s wheel bolt pattern? I know that you can purchase bolts that do this “) to a C-class Mercedes? (C63)
This is not accomplished by the bolt. Because it is a thick spacer, it may simultaneously have the BMW and Mercedes bolt pattern drilled into it.
Thus, after installing the spacer on the vehicle, the wheel is then bolted straight into the spacer using 10 lugs or bolts altogether. I’m not sure if they have BMW to Mercedes adapters, but they would be useless given that they are typically 20 to 25 mm thick. The difference in offsets between your Mercedes and the extra spacer thickness will prevent the wheels from fitting.
With the use of an adaptor, 5-120 bolt pattern wheels can be mounted on 5-112 bolt pattern wheels.
These adapters are 20mm thick, though. The M3 typically has roughly 20+ offset, while the C63 typically has 40+ offset. Therefore, even if the bolt pattern issue was resolved, it would still be extremely difficult to mount the M3 wheels on the C63.
What automobiles have Mercedes’ bolt pattern?
What Vehicles Share Mercedes’ Bolt Pattern? The standard bolt pattern for Mercedes vehicles is 5 x 112. For luxury car brands like Audi, Volkswagen, Maybach, and Chrysler, this is a typical bolt pattern.
Are rims from Mercedes interchangeable?
On longer excursions, I always prefer to have a proper spare wheel in the boot, but Mercedes wants close to PS300 for a single wheel, and I then have to buy a tire. The A, B, C, and E class have extremely identical 5 stud, 5 spoke wheels when looking at wheels on Ebay.
The short response is “not always.” Different MB models (and varying generations of the same model) have different offsets even if the stud pattern may be the same (expressed as an ET number).
You can find what you need on their website. For instance, if I insert my automobile, it will inform me.
I had never seen the webpage before, but it’s incredibly helpful. The other day, when I was attempting to explain to my insurance company that I had switched from one OEM set of wheels and tyres to another, it might have saved me a lot of time and effort.
The person on the other end of the call had no idea what I was talking about when I said, “I’ve gone from the Avantgarde 17’s to the staggered 18’s installed to the Sport.”
What automobiles have a 5×120 bolt pattern?
- Acura (7) MDX (2007-2013) MDX (2017-2022) NSX (2016-2022) RL (2005-2013) RLX (2013-2021) TL (2009-2014) TLX (2021-2022) ZDX (2009-2013)
- BMW (27)
- Alpina BMW (15)
- BYD (11)
- Bentley (3)
- Buick (10)
- Cadillac (10)
- Chevrolet (8)
Will Mercedes wheels fit Audis?
Offset for Mercedes is 37 mm, and for Audis it’s 45 mm (I believe). E-Class is 5×112 but has a bigger center bore than us. Their rims will sort of fit ours, but ours won’t fit theirs. An E-class has smaller-diameter bolt holes.
What automobiles have a 5×114-3 bolt pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
Fits a BMW with 5×112?
As many of you are aware, BMW changed their bolt pattern (PCD) to 5×112 from 5×120 with the launch of their newest vehicles, including the G01 X3, G30/31 5 series, G32 6 GT, and G11/12 7 series, after about 40 years.
Can you mount wheels to a BMW?
You could decide to upgrade the wheels on your cars at some point. However, you might not be aware of which wheels from other cars will fit your automobile.
Fortunately, any vehicle’s wheel can be used as a replacement. The original wheel should, however, have the same bolt pattern, wheel offset, and size as the replacement.
By looking at the sticker plate on your door, you may determine the appropriate size of the replacement. Measure the wheel or get guidance from an auto retailer for a suitable replacement.
By choosing the incorrect size wheel, you run the risk of harming your car’s suspension, wheels, and brakes. You could even need to stop at the petrol station more frequently for refills.
What size lug nuts fit Mercedes Benz vehicles?
No nuts are used on Mercedes alloy wheel bolts, but they do differ significantly from model to model.
M12 and M14 are the two thread sizes that Mercedes uses. In general, earlier versions use the M12 bolts, which are thinner, and newer models use the M14 thread size. To find your car, look at the listings below.
It is simple to make a mistake and purchase bolts of the incorrect length. For instance, while the Mercedes C Class W204 has an M14x1.5 27mm thread, the C Class W203 has an M12x1.5 40mm thread.
A BMW 328i can fit what size wheels?
For instance, the Sedan 4D 4 Cyl. Turbo version of the 2016 BMW 328i features tires measuring P225/50VR17, but the 2013
tread. It is expressed as a percentage. Low profile tires have a lower number, and high profile tires have a higher number.
A 5×112 bolt pattern: what is it?
The stud count (5×112) and bolt circle measurement (112), the notional circle determined by the studs’ centers, make up the 5×112 Bolt Pattern or Pitch Circle Diameter (PCD).
What kinds of car wheels are interchangeable?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
Can 5×114-3 wheels on 5×120 wheels?
The fact that 5×120 to 5×114.3 wheel adapters can only fit on 5×120 vehicle hubs and convert 5×114.3 wheels is crucial to understand. To avoid wasting time or money, conduct some research before starting the project. Most of the time, you can quickly check the bolt pattern in your owner’s handbook or on Google by entering the model and year. However, there might be some exceptions, particularly if you don’t know the new wheels’ PCD.
It is best to measure the lug pattern size yourself, however. Choose one lug hole on a 5-lug wheel as your starting point, and then use a ruler to measure from the edge of that hole to the center of the hole next to it (skip the one bolt hole). The bolt pattern would be 5×4.5″ or 5×114.3 if the bolt pattern circle diameter is 4.5 inches (114.3mm). Of course, you can get help from your neighborhood auto shop.
A 5×120 can it fit a 5×112?
These 5×120 to 5×112 PCD adapters are made to convert your PCD from 5×120 to 5×112, and they just snap onto the current wheel hub on your car.
These M14x1.5 threaded, 45mm thick PCD hub adapters will reduce the center bore of your car from 72.5mm to 57.1mm.
Please be aware that these 45mm PCD adapters will widen the track by 90mm overall; consider this before buying.
PCD hub adapters are perfect for anyone who wishes to change their vehicle’s PCD pattern and are especially popular with vintage car owners who want to suit their classic automobile with more contemporary wheels.
These PCD adapters are made by H&R in Germany from lightweight, high-strength aluminum for a safe and secure fit. They have also received full TUV approval.