What should a fleet manager be aware of when using run-flat tires as opposed to non-run-flat tires? Manufacturers of tire and mounting and balancing equipment agree that run-flats are more challenging to mount and demount due to their special construction.
On the subject of whether run-flat tires can be mended, there is disagreement. The replacement tire limits and suggestions made by the vehicle manufacturer are frequently followed by tire manufacturers.
For instance, Michelin North America Inc. permits the repair of its run-flat tires (Zero Pressure) under specific conditions. But according to the owner’s manual, changing a BMW’s original equipment run-flat tires is not an option.
The U.S. Tire Manufacturers Association (USTMA) recommends the same run-flat tire repair techniques for both run-flat and non-run-flat tires. Prior to doing so, USTMA does advise vehicle owners to inquire about the tire manufacturer’s repair policy and, if appropriate, suggested repair techniques.
In This Article...
Can run-flat tires be repaired? Or should you swap them out?
Knowing what kind of tires your automobile has can help you decide what you can and cannot do safely if you ever find yourself in a challenging scenario. The majority of BMW vehicles come with run-flat tires. They do this because it offers their clients a few more advantages:
- The main advantage of a run-flat tire is that it enables you to continue driving for up to 50 miles at a speed of 50 miles per hour. This eliminates the need for a person to get out of their automobile on the side of a busy road or attempt a tire replacement in the dark.
- More stable after a blowout: Because a run-flat tire can maintain the weight of the car without any air, after a sudden deflation, steering and handling will resemble normal.
- Reduced vehicle weight: The weight of the vehicle is decreased by the removal of the maintenance tools and the spare tire.
How do you tell whether your tires are BMW run flats or not? On the sidewall is all the information you require. The RSC label is what you want to look for on BMW automobiles.
When run flat tires have been driven with a severe underinflated or zero pressure state, most manufacturers advise replacing them. This is due to the inability to confirm the integrity of their internal structure.
Now, if you have regular tires and one of them sustains damage, the other tire might be fixed if it satisfies the requirements listed below:
- The flat tire has not been driven on.
- Your tire’s tread area is the only area that has been damaged.
- The hole is barely bigger than 1/4.”
The right approach to fix a flat tire is to fill the puncture hole from the inside and then cover the repair with a patch. Your tire should not be plugged. Ever. The tire does not need to be removed from the wheel for plug repairs to be performed properly. It is faulty since a plug is just slid into the hole. Ask your tire center to demount the tire so you may inspect the inside and outside in its entirety. Tire repairs are to be made only after a careful examination.
You will need to replace the damaged tire if the three aforementioned requirements are not met. Don’t forget to check the tire on the opposite side of the automobile; if it has a shallow tread, you should at the very least replace it.
Michelin advises changing all four tires at once, but if only two need to be replaced, make sure the new tires are the same size and type as the old ones, and request that the dealer always mount the new tires on the vehicle’s rear axle when it is practical. Please merely replace the tire if there is ever any doubt about its integrity. The security of you and your passengers is not worth any amount of money.
crazyeyeskilla
You can patch it as long as the nail is in the tread; just make sure a top-notch shop handles it. Over the course of a particularly frustrating four months, I had three nails in the same tire. I had no intention of buying new tires three times. The only drawback to repairing them is that if you frequently drive at speeds of 100 mph or more and cause the tires to become extremely hot, the patch may come off. Unfortunately, the majority of Americans don’t have to worry about this.
So, are they patchable?
Patching is still an option in some circumstances. It all relies on the type of damage or puncture the run-flat tire has sustained.
Run-flat tires enable you to continue driving even if all or portion of your tires lose air pressure. This is made feasible by the design of the tires.
They have sidewalls that are strengthened, which allows the tread to keep surface contact with the road.
Remember that the contact patch or tread is what allows tyres to give stability and grip.