Well, I managed to run into my service advisor when I drove over to grab a jug of the OEM cooler. He is someone I trust, not just because he drives an E36 M3, and he stated it is completely fine to use the non-BMW coolant.
If you recall my earlier post, they had in fact suggested Peak (in the blue jug) as a good substitute. They actually employ it pretty frequently.
He said, “If using the BMW coolant will make you feel better, I won’t stop you, but the Peak coolant works just as well and is a third of the price.”
I’ve made the decision to utilize the 50/50 mixture of Peak and distilled water that I made yesterday after reading this piece of advice.
He said that it’s probably Pentosin, a company that creates automotive fluids for German automobiles, when I asked him who OEMs their coolant to BMW.
I conducted a quick search on pentosin fluids and found the following:
It should be noted that the product declares its nitrite, amine, and phosphate freedom expressly.
It appears that finding the OEM coolant source, or at least a substitute, is getting closer. However, as Kaz pointed out, even if you manage to obtain the material, you’ll be lucky to find it for the same cost as the dealer’s coolant.
In This Article...
Conclusion
In conclusion, coolant is an essential part that every automobile owner needs to have. It greatly extends the life of the engine and is your engine’s best friend.
You need a BMW certified coolant if you own a BMW. BMW Coolant Antifreeze or BMW 82-14-2-209-769 Antifreeze can be used.
All BMW models respond exceptionally well to both coolants. The two main corrosion catalysts, nitrite and phosphate, are absent from them.
They offer your cooling system and engine the best defense against corrosion, heat damage, and boil overs.
Which coolant is suitable for my BMW?
For BMW vehicles, the ZEREX G-48 coolant is perfect. The coolant, which is made for both diesel and gasoline engines, contains low-silicate, pH, anti-phosphate technology that guards against corrosion in all metals, including aluminum.
It is diluted at a 1:1 ratio to protect the modern engine’s components from freezing in the winter and boiling over in the summer. Additionally, the combination is prepared in 5:7 ratios for maximum protection. It also includes a high-quality defoamer system and contains less silicon than the vehicle’s mandated 250 parts per million.
Can I drive my car with Peak 50/50 coolant?
Performance Without Compromise: At Peak, we have 65 years of experience defending your car’s cooling system against severe rust and corrosion as well as extremely hot and cold weather. Maximum Ready Use A 50/50 prediluted antifreeze and coolant mixture is suitable for older diesel and automobile applications.
Does BMW require a particular coolant?
Antifreeze and coolant Any generic antifreeze won’t work since BMWs have unique coolant specifications (nitrite and phosphate free) to prevent build-up and corrosion of metal components.
Can I mix BMW coolant?
To make the best coolant, they must be mixed. You can purchase antifreeze that is full strength and needs to be diluted with distilled water before being applied to the engine system, or you can purchase ready-made combinations of coolant that already have water added.
What occurs if the incorrect coolant is used in a BMW?
The performance of the specific additive packages can be hampered by mixing various engine coolants or by using the incorrect coolant, which can lead to increased corrosion of the radiator. The engine coolant needs to be changed more frequently as the cooling system’s protective layers gradually get thinner and more porous. Using the incorrect engine coolant can progressively cause corrosion and damage to the cylinder gasket, water pump, radiator, and radiator hoses. In the worst situation, this may result in engine damage.
Must you mix BMW coolant?
Keep your cooling system operating at its peak performance by using BMW engine coolant (antifreeze). This 1-liter bottle works well for little top-offs of coolant that has been lost. For the best defense against boiling, freezing, corrosion, and lubrication, coolant is mixed with distilled water. For the optimum protection in street cars, mix distilled water with antifreeze 1:1. Reduce the amount of antifreeze in your coolant mixture if you want more cooling properties, but only in warm climates where freezing is not an issue. We advise monitoring the freezing point of the coolant mixture if you want to use antifreeze and water ratios other than 1:1.
Red Line Water Wetter can also be used with pre-ignition if high temperatures could lead to engine knocking.
- BMW # 82141467704, genuine German OEM antifreeze
- optimum cooling, freeze prevention, lubrication of the water pump, and corrosion resistance
Is Peak coolant antifreeze universal?
Peak(r) Green Antifreeze and Coolant is a universal formula for cars and trucks that aids in preventing rust and corrosion year-round on all cooling system metals, including aluminum. From -87°F to 278°F, it also offers freezeup/boil-over protection. The concentrated recipe is prepared and just has to be diluted with water.
What is the lifespan of BMW coolant?
How frequently should a BMW have its coolant changed? Typically, every 30,000 miles or every two years, you should have a BMW coolant cleanse conducted. Your car may be able to go longer between flushes in specific circumstances.
Can I use blue and green coolant in my BMW?
It appears that they can coexist, with green being able to mix with blue-filled cars but not the other way around. from getbmwparts copied: G48 coolant (blue) should not be used in vehicles that were first filled with HT-12, although BMW HT-12 can be used in any vehicle that now uses G48.
Is Peak antifreeze suitable for all automobiles?
All Makes and Models, PEAK Antifreeze + Coolant PEAK Coolant and Antifreeze Formula has 10X more inhibitors for scaling and 16X is also quite amazing for taking out some zombies.
What type of coolant should I use in my car?
There are many various kinds of antifreeze, and it’s important to realize that no one type of antifreeze is appropriate for all makes and models. Use only the antifreeze that your car’s manufacturer recommends as a best practice.
BMW coolant is what color?
To maintain your cooling system operating at its peak, we advise using only German OEM BMW engine antifreeze, part number 83192468442. Because they don’t include nitrites, amines, phosphates, or borates, BMW exclusively suggests specific coolants. It is not permitted to use store-bought coolant from a nearby parts retailer.
2018 saw the introduction of this new green coolant, which has replaced the previous blue coolant. Green can be used on automobiles before 2018 and is backwards compatible with blue. BMW advises against using the older blue formula on vehicles created after January 2018.
The silicates in the green coolant provide further protection for the cooling system’s internals, although the coolant needs to be changed every two years.
For increased corrosion resistance, anti-freeze defense, and water pump lubrication in street cars, we advise combining distilled water in a 1:1 ratio with the mixture. Reduce the amount of antifreeze in your coolant mixture if you want more cooling properties, but only in warmer climates where freezing is impossible. We advise monitoring the freezing point of the coolant mixture if you want to use antifreeze and water ratios other than 1:1.
Red Line Water Wetter can also be added if high temperatures could lead to engine banging or pre-ignition.
Original BMW HT12 antifreeze from Germany, part number 83192468442
Can I mix green and blue peak coolant?
Let’s address the big question: Can you combine different brands? now that I’ve clarified what goes into coolants.
Yes, that is the response. Peak can be blended with Zerek or Prestone, but only if they are both the same chemical type of coolant. The ratio is less important, but the type and application must be compatible.
The simplest method to keep this in mind is to try to pair together like types: IAG with IAG, OAG with OAG, and HOAT with HOAT.
However, it’s qualified and depends on getting things to match as closely as you can, just like anything else. Combining various antifreeze or coolant brands may reduce their corrosive effects and endanger your engine.
There will be times when you won’t have an option but to use various coolant or antifreeze brands. as when you go to a hardware store or gas station and discover that the brand you typically buy is sold out.
The safest course of action in that case is to drain the old coolant and replace it with the safest coolant or antifreeze you can locate.
In a pinch, however, you can use the closest match, particularly if it’s temporary.
What is the purpose of Peak antifreeze coolant?
Cooling system parts are protected by PEAK Antifreeze. Specifically designed to provide Superior Lifetime Protection+* against harmful scale and corrosion, preventing the need for expensive cooling system component maintenance.
The peak universal coolant is what color?
Old World Industries’ first significant entry into the extended life antifreeze/coolant market in more than a decade, the release of the new PEAK, is the product of in-depth analysis of the requirements and purchasing procedure of DIYers.
New PEAK Antifreeze + Coolant from Old World Industries has been introduced; it is made with an advanced formula that ensures outstanding lifetime protection.
*+
Old World Industries CEO Charles Culverhouse remarked, “Our new PEAK fits the expectations of consumers who desire a high-performance antifreeze/coolant.” With the assurance that our cutting-edge formula provides for outstanding lifetime protection, consumers can rest easy.
The business claims that the newly developed PEAK Antifreeze + Coolant is particularly built with an advanced proprietary formula that combines scale-fighting inhibitors and organic acid corrosion inhibitors to provide Superior Lifetime Protection+* against scale and corrosion. Water of poor quality may cause scale to develop in the cooling system, or corrosion products may accumulate on surfaces. According to Old World, these deposits can impede coolant flow in the radiator and other cooling system components, greatly lowering heat transfer and causing the engine to overheat. Scale accumulation of just 1/16 inch can reduce heat transfer by up to 40%.++ For a minimum of 10 years/300,000 miles of peak cooling system performance, the new PEAK Antifreeze + Coolant offers more than twice the warranty coverage** and includes ten times as many scale-fighting inhibitors.+*
With more than 30 shops, including AutoZone, Advance Auto, and Pep Boys, carrying PEAK Original Equipment Technology Antifreeze + Coolant, the introduction of new PEAK Antifreeze + Coolant is timed to coincide with this expansion.
What occurs if the incorrect coolant is used?
The performance of the car can be hampered if the wrong coolant is used or if several types are mixed together. Additionally, the radiator’s corrosion may worsen. It’s crucial to remember that color alone cannot accurately identify the type of coolant you should use. The radiator, water pump, radiator hoses, cylinder gasket, and other components can suffer corrosion and other issues as a result of using the incorrect coolant. Having a qualified auto mechanic handle your vehicle’s maintenance is the greatest method to guarantee that you obtain the right coolant.
The peak global lifetime coolant is what color?
With its cutting-edge organic acid technology, PEAK Global(r) LifeTime(r) 50/50 Antifreeze + Coolant offers assured lifetime protection for as long as you own your car!* Regardless of the make, model, year, or original antifreeze color, its specifically formulated formula will offer the highest level of protection against harmful rust and corrosion in all cars and light/medium duty trucks worldwide.
Features & Advantages:
offers lifetime protection that is guaranteed for as long as you
Fill is carried out, and maintenance guidelines are followed+ +Requires routine manufacturer-recommended maintenance as well as a full cooling system flush and fill.
- developed for use across all of America, Asia, and Europe
- has a proprietary, silicate-free non-2-EH formula.
- The present antifreeze color won’t change when the amber color is used.
- created with all passenger cars, SUVs, and motorcycles in mind