Then, it can be frustrating and puzzling if your Kia won’t start. It may leave you with little to no options, particularly if it happens at an awkward moment. A malfunctioning starter or damaged cables are two of the most frequent causes of this issue. However, there may be further causes for this as well. Let’s examine each to assist identify the issue:
In This Article...
Bad Starter
The most prevalent reason for this problem is a faulty starter. To start the engine, the starter has an armature that quickly swings back and forth between magnets. When you try to start your automobile, the starter may click or it may not spin at all if it has a problem.
If this occurs, it may also leave you stuck because a bad starter can result in a dead battery. Additionally, if the battery is not providing electricity to the vehicle, this may also occur, which would indicate an issue with your alternator or wires.
Bad Starter Solenoid
The starting solenoid receives the command to switch on the starter when you turn the key to start your Kia. When you start the automobile, it will only detect any issues with this component. A damaged one might click, but it won’t flip over since it can’t send enough power, preventing it from turning over.
Faulty Starter Relay
The signal for your car’s ignition is sent by this relay. Although it doesn’t really power the starter, this element plays a crucial role in why your engine won’t start.
This component can be defective if you discover that your Kia won’t start. When you turn the key, it will either click or create a whinier sound.
Failing or Dead Battery
Your Kia might not start if the battery is dead or defective. The battery won’t be able to power the starting if it is too weak.
When you turn it over, it normally makes a clicking noise, but occasionally, this issue may cause the dashboard lights to flicker. Additionally, since the batteries occasionally won’t connect properly, make sure Kia or your auto shop replaced it appropriately.
Whether this is the case, try jumpstarting your battery to see if it is dead. When your automobile is receiving a strong charge, the clicking sound will typically stop. You can also take the battery to a nearby auto parts shop to be charged and checked to see if it needs to be replaced.
Bad Alternator
It’s crucial to be aware that the car battery could die if you are having difficulties starting your Kia and believe the alternator may be at fault. This indicates that your alternator is not supplying electricity to the remainder of your automobile if it occurs. This can be caused by a bad cable connection or an electrical problem with the system.
Bad Cables / Connections
Your Kia might not start if one or more of the wires or connections is faulty. This is because there wouldn’t be any electricity flowing across the entire electrical system. The battery wires can also be unsecured. Tightening the connections would be the answer to this issue.
Bad Battery Posts
It can be impossible for your battery to connect if the posts are rusted. To roll over, your Kia needs a strong connection between the posts. You can remove any apparent corrosion using steel wool or sandpaper.
Electrical Issues
It’s also possible that your Kia won’t start due to an electrical problem. An electrical short or a malfunctioning starter relay may be to blame for this. If you notice this issue, you should have your car serviced because it could lead to other issues inside your car.
Why isn’t my attempt to start working?
- You’re not depressing the brake pedal all the way. As you push the Start button, make sure your foot is firmly on the brake pedal.
- The battery in your Smart Key is low or dead. Try pressing while holding your Smart Key near to the Start button. You may need to replace the Smart Key battery if this doesn’t work. Your Owner’s Manual contains directions for doing this.
- The car’s engine battery is underpowered. You must go to your nearby Toyota Service Center for a diagnosis and perhaps a new battery if this is the case.
- Unintentionally, the Smart Key deactivation switch was engaged. A deactivation switch, which is situated at the bottom of the instrument panel on the dashboard just beneath the steering wheel, might be available in your Toyota vehicle.
How can I start my Kia key manually?
Beginning the Car
Simply touch the key fob to the remote start button if you see your key fob’s battery is running low. Simply press the start button with the key to get going.
What symptoms indicate a low key fob battery?
A key fob is one of several electrical components in contemporary vehicles. When you press the button to open the door, a transmitter electronic chip inside of it broadcasts the signal. A small battery powers the key fob. In a smart key fob, the battery may last for 2-3 years, whereas it may last for 4-6 years in a standard key fob.
The smart key fob also contains a receiver, so when it is inside or close to the car, it must connect with the car more frequently, which accounts for the disparity. A key fob battery is often not rechargeable and needs to be changed when it runs out of power.
What symptoms indicate a weak fob battery? The transmitter’s range decreases as the fob battery gets weaker. This implies that for the key fob to operate, you must be close to the vehicle. If the smart key fob battery is low, a vehicle that has a push-button start may not always detect a smart key fob that is in your pocket or handbag. Key fob battery low may also appear as a warning on the driver’s display in some vehicles.
If the fob battery is low, will the car start? The security (immobilizer) chip inside the fob operates without a battery in the majority of cars, but only when it is quite close to the vehicle. Therefore, even if the fob’s battery is poor, the car should still start. To start the engine, you might need to place the smart fob into a certain slot or hold it nearer to the “Start” button. For instructions, consult your owner’s handbook. It’s also possible to store a traditional mechanical key within the fob. If the main battery of a car is exhausted or the fob battery runs out, this key can open the driver’s door.
How can the battery in the fob be tested? Many key fobs have a tiny LED light that turns on when one of the buttons on the fob is pressed. If the LED light is completely dark, either the fob’s battery is dead or the fob is experiencing some other issue. You can use a voltmeter to check the voltage of the fob battery if you already have it out. The battery has a mark indicating the voltage.
This battery is defective since it displays 2.858 Volts. A reliable 3-Volt battery should register somewhat higher than 3 Volts.
A 3-Volt battery is weak if it displays less than 3 Volts. As an illustration, the 3-Volt battery in the picture displays just 2.8 Volts; it is defective and needs to be replaced.
What kind of battery is needed for a key fob? The batteries used by various automobiles vary. Three-volt batteries come in two main varieties: CR2025 and CR2032. The owner’s manual will list the precise type. These kinds of batteries are available at any dealership or in any electronics store.
The battery for the fob can be changed easily. To find the instructions and safety measures, consult the owner’s manual. There are a ton of how-to videos on YouTube as well. A tiny flat or Phillips screwdriver can be required.
For instance, we used a little flat screwdriver to pry open the key fob in the top photo at the locations specified in the owner’s manual. Take care; the plastic tabs holding the fob’s components together are fragile and are likely to break. There may be small screws or other easily lost items in some automobiles.
Keep an eye out for the battery’s installation when replacing it. The “+” symbol is written on the one side of the battery. The new battery must be installed exactly the same way in order for it to function.
Visit your dealer; they should be able to change the key fob battery for you if you are not mechanically inclined. Most of the time, it only takes a few minutes. The rates we received from different sellers were all within $10. If only the fob battery needs to be changed, a key fob doesn’t require any programming.
Why won’t my Kia Sportage crank over?
Are you experiencing difficulties starting your Kia Sportage? When you turn the key in your automobile and nothing occurs, it is a frustrating experience. You are aware that you have fuel, so what’s going on? Your Kia Sportage probably won’t start due to one of numerous potential reasons.
We will go through some of the most typical causes of your Kia Sportage not starting in this blog post, along with solutions. We’ll also provide you some useful pointers for maintaining your Sportage in good working order.
The most frequent causes of a Kia Sportage not starting are a dead battery, an alternator issue, or a faulty starter.
How can I reset the battery in my Kia?
Put the key in the ignition inside your Kia and turn it as far as it will go without the engine starting. For three seconds, hold down the lock button on your key fob until the dashboard lights begin to flicker. Your alarm system and computer have both been reset, and your key has been reprogrammed.
I can’t get my Kia Sorento to start.
You are prepared to start your journey if you have the car’s key fob in your pocket or handbag. Observe these easy steps to start the engine:
- Verify that the gears are in neutral (N) or park (P) (N). Put your foot on the brakes. To get the engine to start, press the Engine Start/Stop button.
It’s equally simple to turn the engine. Press the Engine Start/Stop button once more after putting the car in park or neutral.
Why is the red blinking on my Kia key fob?
Your key fob has limited battery life if the red LED on it is slow to breathe.
If the red LED on your fob stays lit for 4 seconds after you try to lock or unlock the door, there was a problem locating the locks. You might want to verify that the locks have been connected to your FOB or that the locks’ batteries are still good. Try to get closer to the lock or take anything in the way of the key fob and the locks if they are both operating on full batteries.
Why won’t my Kia key fob work?
The battery that powers your key fob is most likely to blame if it stops functioning. Typically, watch-sized batteries that are skillfully hidden inside the casing of key fobs are used. With a little screwdriver or key, you can easily peel the key fob apart and change the battery by yourself.
Finding out what kind of batteries they require and keeping one on handeither at home or in your glove boxis a good idea. If you have the batteries on hand, it will save you some effort and they are cheap, costing between $5 and $25. Finding them is not difficult. They ought to be in stock at your local Kia dealer. Additionally, you can locate them in grocery stores, hardware stores, and other stores. Make sure you choose the proper kind. The voltage output of many of these batteries varies despite their similar appearance.
Where is the Kia Sorento’s reset button?
Looking for a simple and quick approach to reset your Kia Sorento’s tire pressure monitoring system? You are in the proper location.
These sensors are installed in every new Kia model to help identify low air pressure conditions that could be harmful to your car. Here are a few various ways you may reset your Kia Sorento’s TPMS.
In a Kia Sorento, the TPMS reset button is either within the glove box or under the steering column.