One 2032 battery is required for both the Kia Smart Key and the regular Kia key fob. This kind of battery is available online or at the majority of large department stores as well as car shops.
In This Article...
What kind of battery does my key fob need?
The fact that button cell batteries have an identifying number printed directly on the top is one practical feature. This number, which is often three to four digits long, will let you know what kind of battery you need. The CR2032 button cell is the one that’s most frequently found in key fobs. The following button cells are also frequently used: CR2450, CR2025, CR1616, and CR2016.
The type of battery that your fob requires may typically be found in your vehicle owner’s manual if, for any reason, you are unable to locate the number on your old battery. Alternately, you can visit your nearby Batteries Plus, where one of our specialists will assist you in identifying the best battery for your requirements.
Is it possible to change the battery in a Kia key fob?
Make sure the front of the key fob is facing downward on a flat surface first. Once that’s finished, adhere to these easy steps:
- Locate a slot on the side of the fob with your flathead screwdriver.
- Pry the key fob’s case open with care.
- Delete the outdated battery.
- Place the 2032 battery there.
- Make sure the key fob is secure by replacing the shell.
Are all batteries for automobile key fobs the same?
A key fob is one of several electrical components in contemporary vehicles. When you press the button to open the door, a transmitter electronic chip inside of it broadcasts the signal. A small battery powers the key fob. In a smart key fob, the battery may last for 2-3 years, whereas it may last for 4-6 years in a standard key fob.
The smart key fob also contains a receiver, so when it is inside or close to the car, it must connect with the car more frequently, which accounts for the disparity. A key fob battery is often not rechargeable and needs to be changed when it runs out of power.
What symptoms indicate a weak fob battery? The transmitter’s range decreases as the fob battery gets weaker. This implies that for the key fob to operate, you must be close to the vehicle. If the smart key fob battery is low, a vehicle that has a push-button start may not always detect a smart key fob that is in your pocket or handbag. Key fob battery low may also appear as a warning on the driver’s display in some vehicles.
If the fob battery is low, will the car start? The security (immobilizer) chip inside the fob operates without a battery in the majority of cars, but only when it is quite close to the vehicle. Therefore, even if the fob’s battery is poor, the car should still start. To start the engine, you might need to place the smart fob into a certain slot or hold it nearer to the “Start” button. For instructions, consult your owner’s handbook. It’s also possible to store a traditional mechanical key within the fob. If the main battery of a car is exhausted or the fob battery runs out, this key can open the driver’s door.
How can the battery in the fob be tested? Many key fobs have a tiny LED light that turns on when one of the buttons on the fob is pressed. If the LED light is completely dark, either the fob’s battery is dead or the fob is experiencing some other issue. You can use a voltmeter to check the voltage of the fob battery if you already have it out. The battery has a mark indicating the voltage.
This battery is defective since it displays 2.858 Volts. A reliable 3-Volt battery should register somewhat higher than 3 Volts.
A 3-Volt battery is weak if it displays less than 3 Volts. As an illustration, the 3-Volt battery in the picture displays just 2.8 Volts; it is defective and needs to be replaced.
What kind of battery is needed for a key fob? The batteries used by various automobiles vary. Three-volt batteries come in two main varieties: CR2025 and CR2032. The owner’s manual will list the precise type. These kinds of batteries are available at any dealership or in any electronics store.
The battery for the fob can be changed easily. To find the instructions and safety measures, consult the owner’s manual. There are a ton of how-to videos on YouTube as well. A tiny flat or Phillips screwdriver can be required.
For instance, we used a little flat screwdriver to pry open the key fob in the top photo at the locations specified in the owner’s manual. Take care; the plastic tabs holding the fob’s components together are fragile and are likely to break. There may be small screws or other easily lost items in some automobiles.
Keep an eye out for the battery’s installation when replacing it. The “+” symbol is written on the one side of the battery. The new battery must be installed exactly the same way in order for it to function.
Visit your dealer; they should be able to change the key fob battery for you if you are not mechanically inclined. Most of the time, it only takes a few minutes. The rates we received from different sellers were all within $10. If only the fob battery needs to be changed, a key fob doesn’t require any programming.
If I change the battery, do I need to reprogram my key fob?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.
How is the battery in a 2017 Kia key fob changed?
The smart key fob is becoming more and more popular since it makes entering and exiting the vehicle very easy. Thanks to a transmitter that interacts with the car, the driver can lock, unlock, and start the vehicle while still keeping the key in their pocket. The majority of cars still require the driver to click a button to start them. Smart key fobs still have a key blade inside of them even if they don’t have an accessible mechanical key like regular key fobs do, just in case their battery runs out unexpectedly.
To replace the battery in a smart Kia key fob, follow these steps:
- Locate the tiny button that releases the emergency key blade at the bottom of the fob.
- Remove the blade from the spare key.
- Locate the key fob slot close to the bottom that precisely matches the size of the emergency key blade.
- Turn the key blade slightly in any direction after inserting it into the slot. The key fob case will then pop open as a result of it.
- Locate the old battery and take it out by carefully pulling the two sides of the key fob apart.
- With the inscription facing down, insert the new battery into the corresponding slot. The smart Kia key fob uses a common 2032 battery, just as the normal key fob.
- Put the key fob’s two halves back together gently and press them together until they join. To reduce the possibility of injuring any component or scratching the plastic, proceed with the utmost caution.
You don’t replace the key fob batteries in your Kia every day or even once a year. However, since Kias are dependable cars that you’ll probably own for a long time, it’s preferable to be prepared should the need arise. Visit Tom Kadlec Kia in Rochester, Minnesota to shop for a new or used Kia.
Why won’t my Kia key fob work?
The battery that powers your key fob is most likely to blame if it stops functioning. Typically, watch-sized batteries that are skillfully hidden inside the casing of key fobs are used. With a little screwdriver or key, you can easily peel the key fob apart and change the battery by yourself.
Finding out what kind of batteries they require and keeping one on handeither at home or in your glove boxis a good idea. If you have the batteries on hand, it will save you some effort and they are cheap, costing between $5 and $25. Finding them is not difficult. They ought to be in stock at your local Kia dealer. Additionally, you can locate them in grocery stores, hardware stores, and other stores. Make sure you choose the proper kind. The voltage output of many of these batteries varies despite their similar appearance.
How much does a Kia battery cost?
How much would a new battery cost for my Kia? Prices for a replacement automobile battery varies from roughly $45 to $250 depending on power, size, and quality.
Can a CR2032 be used in place of a CR2025?
The thickness of the two battery kinds would be the obvious distinction. The CR2025 is 2.5mm thick compared to 3.2mm for the CR2032. The capacity (mAh) of the CR2032 to deliver electricity to the load is higher since it is 0.7mm thicker than the CR2025. Standard CR2032 batteries have a nominal capacity of 225mAh, while typical CR2025 batteries have a nominal capacity of just 160mAh. The thinner battery could not last as long and might need to be changed more frequently because of its lower capacity.
What are the best CR2032 batteries?
One of the most trustworthy 3-volt batteries available, the Duracell 2032 3-Volt Lithium Coin Battery has a great battery life. This CR 2032 battery is a great option for parents with young children because it also comes in child-safe packaging and is coated with a non-toxic, bitter-tasting coating to deter children from putting the batteries in their mouths. Its storage life of ten years makes it one of the best CR 2032 batteries available.
My Kia key fob needs to be reset.
The Kia Key Fob Reset: How Do I Do It?
- Make sure all of your doors are shut all the way before getting into the driver’s side.
- When you hear the door locks cycle, turn the key repeatedly from off to on in the ignition.
- Try pushing the Kia key fob’s lock or unlock button.
- Return the ignition key to the off position.
What occurs if the key fob dies while you’re driving?
This issue has been foreseen by automakers ever since the key fob was created. Nothing will happen if your key fob dies while you’re driving. Simply because the key fob is a locking and starting device only, the automobile will continue to run. The key fob has no influence over the ignition or engine once the automobile is moving.
Even though you’ll need to go to a general store or pharmacy to get the battery, replacing the battery in your key fob simply takes a few minutes if you’re pressed for time.
Why not take the time to renew your auto insurance at the same time as you’re replacing the batteries in your key fob?
You can access a new quotation with just a few taps on your phone screen by downloading the Jerry app and answering a few questions.
Jerry assists you in finding and comparing rates from more than 50 leading suppliers in minutes as a licensed broker. Jerry can assist you with purchasing new insurance and even canceling your existing policy when you find a lower rate.