Gallon of Prestone 50/50 Antifreeze/Coolant for All Vehicles (Part No. AF2100) We have developed an optimal recipe for All Vehicles, including all makes, models, years, and fluid colors: Prestone All Vehicles antifreeze+coolant – Ready To Use (50/50 Prediluted).
In This Article...
How much coolant does a Kia use?
OEM Finished Goods Extended Life Antifreeze/Coolant Yellow is made especially for Hyundai and Kia cars and is appropriate for electric and hybrid models.
Do Kias require a specific coolant?
Every automaker, including Kia, has created its own coolant or needs a specific coolant that is exclusive to specific years and models. Coolants come in a variety of colors, including yellow, purple green, red, blue, and orange, which can be used to aid identify between them.
In my Kia, can I use Prestone?
Our better formula is applicable to all Hyundai, Kia, Mazda, Mitsubishi, Suzuki, Nissan, Infiniti, and Subaru vehicles that are older than 2010. All engines, both new and old, are instantly protected by our improved, patented technology.
What type of coolant is required for a 2011 Kia Sorento?
It’s simple to forget to check your coolant, yet in the case of your car, coolant is just as crucial as oil. The cooling system’s boiling point is raised by coolant in the summer, its freezing point is lowered in the winter, and it also shields the engine and cooling system from corrosion. When driving in cold weather, these features prevent the engine from freezing or overheating.
Because the chemicals in coolant deteriorate and lose effectiveness over time, it must be changed. Rust and sludge are produced as a result of this use, which could harm the cooling system. You run the chance of the engine overheating if the cooling system is damaged, which is a considerably more expensive error than paying for a coolant flush.
Finding the Right Fluid
You’ll need to discover the appropriate coolant when it’s time to top off or do a full system flush. If every manufacturer used the same coolant, it would be convenient, but they don’t. Inorganic Additive Technology (IAT), Organic Acid Technology (OAT), and Hybrid Organic Acid Technology are the three primary forms of coolant that automakers utilize (HOAT).
Most vintage vehicles employ IAT. It is far less effective than more recent formulae and must be replaced every two years or 24,000 miles. OAT is one of those more recent mixtures. This formula is used in General Motors vehicles, which typically need to be changed after five years or 50,000 miles. Finally, HOAT is a derivative of OAT and, unless otherwise specified, requires the same time change interval.
Visit your car’s dealership to ensure you’re buying the appropriate coolant for the task. Your precise make and model’s recommended coolant will be sold, and it will be the right one. The coolant is frequently marked with the name of the vehicle it will be used in.
For instance, all of Honda’s dealers sell Type 2 antifreeze/coolant. Many others, like BMW and Volkswagen, operate in a similar manner.
Though not all manufacturers do this. All GM vehicles come equipped with a system called Dex-Cool. Ford utilizes Motorcraft in contrast.
You should be aware that almost every current coolant jug you come across has already been diluted. In the past, coolant was usually sold as pure coolant, which required manual water dilution. Of course, the pre-diluted product is more practical, but you wind up spending much more for less coolant.
My 2016 Kia Sorento needs coolant; how do I add it?
Kia Sorento (2016-2019) LX 3.3L V6: Add Coolant
- Locate and clean the coolant reservoir by going to the reservoir.
- Check Level: Check the level of the coolant.
- Add Coolant: Select the right kind of fluid and add it appropriately.
- Replace the cap on the coolant reservoir and tighten it.