Please provide the two-digit color code with your order if you want to make sure you get the right shade.
The VIN Plate, which is on the inside of the driver’s door, or the drivers door pillar both contain the color code (see picture to the left). Only vehicles for the USA market can have information looked up using our technology.
In This Article...
The Ultimate Paint Pen
Please be aware that this pen’s paint does not act as a corrosion inhibitor. Before applying the touch-up paint to exposed metal, an effort should be made to remove any rust that may be present.
Ensure that the stone chip surface is dry and clean. Take away any leftovers (wax, rust, dirt, or other).
Step 2 Shake thoroughly each time before applying so that the ball can travel within freely. After that, blow out the pen by pushing the tip downward while pointing it upward.
Tap the tip softly and repeatedly on a piece of cardboard to release paint. Utilize cardboard to apply surplus paint removal.
Apply a little amount of color to the bottom of the scratched or chipped area by lightly dabbing it on. DO NOT DRAG PEN TIP OVER AREA. To completely cover the region, more than one application could be required. Between each application, allow 15 to 20 minutes.
Repeat steps 2 and 3 to prepare the tip after waiting one to two hours before using the clearcoat side of the paint pen.
Apply the clearcoat to the scratched or chipped area gently using a dabbing motion, being careful not to drag the pen’s tip across the area. When applying the clearcoat, take care not to damage the repaired surface. To achieve a precise match with peralized hues, further clear coat treatments may be necessary.
If one of the tips appears to be blocked or has dried up, take it from the pen, dip it in thinner, and then replace it.
How can I paint my car with touch-up paint?
Here are the seven steps you should do to use a DIY touch-up paint kit to repair the damage to your car for optimum results.
- Clean the Car’s Surface
- Recognize the damage
- Sift the harmed area.
- Use paint thinner to clean
- Put the touch-up paint on.
- Ensure a Smooth Surface
- Put the Clear Coat on.
- The Touch-Up Paint should cure.
- Clean up the Paint
Clean the Surface of the Car
Always start with a clean surface when performing paint repairs. Verify that the car has recently been washed. Clean the area with a spray glass cleaner after that before starting. Finally, use a microfiber cloth to completely dry the automobile.
Identify the Damage
Examine the surface of the car from the front to the back using a powerful light. Marking the areas of damage with a little piece of masking tape might be useful. When you have the touch-up paint on hand, this will make it simpler to recognize them.
Sand the Damaged Area
The paint will need to be sanded in order to get the damage ready for restoration. Sand the area directly surrounding the chipped place with 15002500 grit sandpaper or a small sanding block. Sand the paint with quick, light strokes back and forth. It should be sanded until the paint is uniform in appearance and has lost its shiny sheen. When you rub the region with your finger, the area around the chip should feel smooth.
Clean with Paint Thinner
To prepare and clean the sanded area, use paint thinner next. A tiny amount of all-purpose automotive paint thinner should be dipped into a cotton swab. After that, clean over the sanded damage and the paint chip with the cotton swab. When driving, it’s critical that the repair paint adhere well and withstand the environment. Applying paint thinner will also aid in improving the adhesion of the touch-up material.
Apply the Touch-Up Paint
Apply a base coat that matches the color of your car using a fine-tipped paintbrush. Put a little paint on the brush’s tip. After that, lightly dab it over the prepared area. Utilize a little bit at a time. You could observe that the volume of the paint decreases as it dries. Before applying the clear coat, wait until the paint layer has dried to see if another coat of base paint is necessary.
Ensure the Surface Is Smooth
It will be necessary to build up the paint to be flush with the rest of the car’s surface for deeper chips. Apply the paint in layers, letting each one dry before adding another.
Apply the Clear Coat
A clear coat must be applied to finish and seal the base coat once it has fully dried. The same dabbing technique as before should be used with a fresh, fine-tipped paintbrush. Before deciding whether another clear coat will be required, let it half dry.
Let the Touch-Up Paint Cure
It’s time to take a step back once you’re happy that the paint has been corrected and the touch-up job looks good. Allow it to thoroughly dry and solidify for at least 48 hours.
Polish the Paint
Utilize a car polish compound to finish the task when the paint has completely dried. This will make the mended area shiny like new paint.
Keep in mind that this DIY method of fixing automobile paint is not meant for severe paint damage. It works well as a short-term fix for tiny paint chipped areas. Professional repainting is advised in the long run or to fix more severe damage. Your car’s susceptibility to rust and corrosion may increase if paint damage is not properly repaired or is not repaired at all.
Watch this video for an useful walkthrough on how to paint your car in touch-ups.
What is the drying time for Kia touch-up paint?
Make your Kia paint shine once more by following these restoration instructions! For more
See our Directions for How To Apply for comprehensive guidelines, including how to apply Kia spray paint.
Prepare Your Kia for Touch Up Paint
Make sure the temperature is above 50 degrees Fahrenheit, then use soap and water to wash the damaged paint off your Kia.
water. On the region, apply a wax and grease remover. Applying masking tape to the paint on your scratched Kia
Apply Primer Before Painting Your Kia
Apply primer to any unpainted areas of your Kia, such as exposed metal or plastic, before painting.
paint repair! When priming the Kia paint that needs repair, use several light applications. Apply just a
a little primer to your Kia sometimes Before using, let the primer dry for at least a whole night.
the paint for Kia touch-ups. After drying, use #220 grit sandpaper to softly sand the primed Kia paint area.
How to Apply Kia Touch Up Paint
You may now paint your Kia with touch-up paint. Apply a few light layers of Kia touch up.
The damaged paint area should be painted over to the same depth as the surrounding surface. allow Kia to paint
between coats, allow to dry for ten to twenty minutes. Allow the paint to completely dry after the final layer.
prior to the clearcoat layer. The Kia paint will often be dry the next day if you let it dry overnight. If
If the weather is below 70 degrees Fahrenheit, give the Kia touch-up paint more time to cure.
Protect Repaired Kia Paint with Clearcoat
Verify the Kia touch-up paint you previously applied is completely dry. Place several light layers of clearcoat on top of
the retouched Kia paint, let each layer to cure for fifteen to twenty minutes. The clearcoat should dry.
Use Rubbing Compound to Make Your Kia Paint Shine
Your Kia touch-up paint repair will become as smooth and lustrous as the original paint with the help of rubbing compound.
Use rubbing compound on your Kia after letting the clearcoat cure for at least three days. use rubbing
a clean, soft cloth, such as an old t-shirt, to your Kia’s paint; avoid using wood products such
tissue paper Apply rubbing compound sparingly to the region where you put Kia touch-up paint.
paint. Apply equal pressure while making circular motions across the surface. buff to a high gloss using a clean cloth.
gloss. Allow your Kia’s finish thirty days to dry for the finest results when using touch-up paint on your vehicle.
Can Kia be painted over?
The Kia Touch Up Paint Pen works fast and effectively to hide small exterior dings and scratches. The dual-tipped pen has a clear coat side and a side painted with color. Clean the area, apply the paint, and then park the car somewhere cool and dry until it has time to dry. To seal, safeguard, and guarantee a factory-matched finish, use clear coat. When you need to repair a little scratch, the Kia Paint Pen is ideal. For a Kia color code match, enter your VIN in the box above. Here is a video that shows you how to use the Paint Pen.
Availability Note that several EV6 & 2023 Sportage color options are presently out of stock. If we can’t fulfill your order, we’ll let you know.
Based on the specified VIN (vehicle identifying number), we ship these paint pens. There are other names for colors, but we only accept orders with a VIN. For any incorrectly inputted vehicle identifying numbers, KiaStuff disclaims all liability. It is not possible to return a paint pen that has been used.
Does car paint touch-up work?
Touch-up paint could seem like the ideal answer if your car has a few minor dings. It’s preferable to take your automobile to a professional to have it touched up, even though touch-up paint is wonderful for making your car look great again without having to spend for pricey auto painting. These are a few of the causes.
There are so many different colors for cars. Additionally, the paint might naturally fade in the sun over time, so the paint that formerly matched it might no longer do so. Finding the ideal color might be challenging, but a business that specializes in auto painting and other auto body treatments can locate a flawless match.
A small bit of touch-up paint goes a very, very long way, as you should be aware. You risk applying considerably too much if you use the brush that comes with the touch-up paint container. If this happens, your automobile can even seem worse than it did before because you won’t have a smooth, level surface. However, a skilled auto body technician will be able to apply the ideal quantity.
To ensure that your touch-up paint lasts for a long time, you need to take a variety of factors into account. Since high humidity levels can have an impact, you should make sure the correct circumstances are met when performing the task. You must also make sure that the surface of your car is thoroughly clean and wax-free. An expert in car body work can make sure that all the conditions are ideal for your touch-up paint to last for a very long period.
Don’t sand down chips.
Yikes. There are articles out there that advise you to sand the damaged area down before applying touch-up paint. For a few reasons, that is a terrible idea. First, the chip’s edge is necessary for the best outcomes. It serves as a container for the paint, like a bucket. It is impossible to manufacture touch-up paint thin enough to sit properly on a smooth damaged area since paint has a thickness to it. Second, sanding it will ruin the good paint around it. If sanding is done at all, it should be done by a professional. It’s really simple to go too far and damage your paint.
Don’t use clear coat touch-up paint.
The majority of touch-up kits are only a source of revenue for the auto dealers who sell them. They are genuinely ineffective. The touch-up of the clear coat is a case in point. A clear coat is far too thick to be applied with a brush. Technically, you could, but it would look terrible. When using touch-up paint to cover a very small area, clearcoat must be sprayed on instead of being used. Touch-up paint by Dr. Colorchip is suggested by PaintCraft.
Don’t use a kitchen scrub pad or fingernails on your car, ever.
Some people may find this apparent, however I’ve frequently witnessed folks using a scouring pad or their fingernail to clear something off their automobile. The paint on your car is highly delicate and prone to scratches.
Don’t put things on your car.
Make sure nothing, including your bum, groceries, boxes, or handbag, is placed on top of your car. When you search for your car keys, even very lightly resting your purse or shopping bags on the trunk of your car will cause scratches, especially if you do it frequently. Even while they might not appear right away, they eventually do and only become worse with time. Your car’s heating and cooling will reveal scratches, grime, and debris buildup, which will subsequently make them more obvious.
Can existing auto paint be painted over?
The custom paint job “Scuff and Shoot:
If your paint is already in good shape but you want to add a special effect pigment custom paint over existing paint, this article generally explains what you need to do.
We will go into further detail about preparing your existing paint because it is so crucial. The first step is to take out as much of the car’s hardware as you can, such as the mirrors, side marker lights, and taillights. However, don’t remove anything you intend to paint. Then, you must cover any parts that may be harmed by sandpaper or scuff marks (grilles, door handles, chrome trim, rubber trim).
The entire surface of what you are painting needs to be prepped. Use a red Scotch-Brite cleaning pad or wet-sand paper with a 600 grit. The surface you are going to custom paint should be cleaned of all gloss. make the surface as a whole appear drab. The paint has an excellent rough surface to cling to thanks to those little scratches.
For painting, cover the entire project. Cover everything that could be harmed by overspray. After masking, clean the area with a cleaning (such as PPG’s dt-330) to get rid of any wax and grease so that the project is ready for painting. Always use items according to the manufacturer’s directions. It is crucial that after cleaning, YOU DO NOT TOUCH THE PROJECT. Clean again before painting if you won’t be painting right away.
Choose the products you want to use. The remaining paint work will depend on the product you use. You can use the product you’ve chosen to create bespoke paintings by following our instructions. Depending on the product you’ve selected, the subsequent instructions will be different.