Be aware that purchasing a Kia vehicleespecially the Sorentoshould precede any roof rack installation. Shoppers should be aware of various crucial elements, such as:
- Features
- Specifications
- Product excellence
- brand worth
Owners of Sorento vehicles should also be aware of the roof’s maximum weight capacity. The 2019 Kia Sorento, for instance, has a 165-pound weight restriction. Therefore, assuming that particular model has an 11-pound roof rack, 154 pounds are left to be loaded onto the roof rack.
Before beginning the installation process, you should review the owner’s instructions for your roof rack. By doing so, you can check to see if any special procedures are needed for the setup that might not apply to other roof rail models.
Following the acquisition of a roof rack suitable with your Kia Sorento and review of the product’s owner’s manual, you can proceed with the installation by doing the subsequent actions:
In This Article...
Step-by-Step Guide
- Lock the end cap on the rail’s one end.
- Insert the bracket into the rail’s exposed side. When performing this step, make sure you’re following the correct orientation.
- For the opposite side of the rail, repeat steps 1 and 2.
- Place the roof rail delicately onto the Sorento’s roof.
- To fit the configuration, adjust and secure the bar.
- For the other rail, repeat steps 1 through 5.
A full kit, or a set, denotes that the roof rails are of high quality and that you won’t need to make any other purchases to finish the construction. The following components make up a typical but comprehensive roof rail kit:
How do crossbars on roof racks function?
- Rubber bases known as “bottom pads” are placed between your roof and the tower. provides stability and guards against roof damage.
Thule 400 fit kit, Prorack fit kit, Yakima RidgeClips, and Base Pads are the fit components, from left to right.
Crossbars
There are often two bars that span the width of the car’s roof, to which you may attach racks for different activities, such as ski racks, bike racks, baggage boxes, kayak racks, etc. Crossbars help to distribute the weight of all the equipment you are adding to the roof to the towers and feet. Round (Yakima), square (Thule, Inno), aerodynamic (Thule, Yakima, Whispbar, others), and factory crossbars are the four main crossbar types.
Examples of crossbars, from left to right: Whispbar Through bars, Thule Aerobars, and Yakima Roundbars
How much weight can a roof rack for a Kia Sorento support?
- I can provide you fantastic referrals for each of your searches! You must own the same brand in order to use one key.
The 165-lb capacity applies to all roof racks for your 2017 Kia Sorento. Therefore, I suggest the Yakima JetStream Crossbars, part number Y00425. With the help of the RidgeLine Towers (part number Y00145) and the RidgeClip Fit Kit (part number Y06013), they are aerodynamic and fitted to the rails.
I suggest the Yakima CBX Rooftop Cargo Box, part number Y86FR, for the cargo box. There are 18 cubic… view the whole answer
What you will need
Using the roof racks to move luggage is not too difficult if you adhere to the advice and safety measures we’ve provided below. You only need:
- one ratchet strap or cam strap for each cross bar
- Long, rectangular backpacks that can contain your gear can range in length from 1.2 meters (4 feet) to 1.8 meters (6 feet). Some tents will already have a bag that is the right size and shape. Heavy duty marquee bags are perfect for this purpose if you need to purchase a bag, particularly one that is PVC lined for waterproofing.
- durable trash bags to shield items from dust and moisture.
- a car with crossbars and roof rails!
Directions
- Put the timber support if you’re using it on top of the roof racks.
- Place the bag(s) close together and side by side on top of the crossbars and any other wooden supports.
- Openings should be facing down, and zipper sliders should be near the back of the car for greater weather protection.
- To prevent bag straps from flapping in the wind, tuck them underneath the bag.
- Balance the load evenly over the bars so that it is distributed and weighed equally and is not perched excessively front or backward on the racks. Make sure that each end sticks out at least 20 cm from the crossbars. If not, make the cross bars closer together by adjusting them.
- With the buckle facing you, place the straps over the top of the bags, providing enough space to tighten them. To the other side of the car, throw the other end over the bags.
- Throw the other end back over the bags toward the buckle side after wrapping it around the underside of the crossbar.
- The end should be wrapped around the crossbar’s underside, threaded through the buckle, and then tightened.
- The surplus strap should be wrapped around the crossbar and tied off.
- For every bar, repeat this procedure.
- Give the cargo a vigorous shake to make sure it is secure. Once on the road, check the load after the first 10 km and at each stop. To ensure that the load is securely secured, tighten the straps as needed.
How to Use Ratchet Straps On Roof Racks
The most common type of strap used to secure big objects is undoubtedly the ratchet strap, which, when combined with cam (cambuckle) straps, would be ideal in our case.
The only advice we have for utilizing ratchet straps is to avoid over-tightening them, especially for materials that could be damaged, including the frames of tents and marquees, as we describe below.
There are many things to be aware of while utilizing ratchet straps, so for some helpful advice, see Fisher’s Off-Road or Wikihow.
Direction
The way they lie is the main distinction between roof rails and roof racks. From the hood to the trunk, roof rails extend the length of your car. From the driver’s side to the front passenger’s side of your automobile, roof racks and roof bars are installed crosswise.
Functionality
Roof rails are frequently included in the design of your car. They communicate in a variety of ways. Some have a raised design that results in a space between the rail and the car’s roof. Others are seated right up to the car’s roof. These rails’ main use is to give roof racks mounting points. They do not act as carriers in and of themselves.
In contrast, roof racks serve as a transporter for your cargo. They often have a platform or rack of some kind in addition to a set of crossbars or roof bars. This platform could be a modular rack system, a kayak rack, or a cargo box. The vehicle’s current roof rails are where the roof bars are mounted.
We notice the distinction in the names of roof bars and roof racks when we examine them more closely. Roof bars, also known as crossbars, are a group of typically two bars that span the top of the vehicle. In contrast, a roof rack has multiple crossbars and frequently has a modular design. The racks occasionally observe a fixed layout with a predetermined number of crossbars.
In some cases, the roof rack system can be mounted at the same locations as the existing rails. In order to install the roof racks, you must here remove the rails. Typically, flush roof rails are installed in this manner in automobiles. The method for installing the roof racks depends on the type of rails your vehicle has. Your choice of roof racks will also affect how they are installed.
Elevated Roof Rails
These enable the clamping or connection of crossbars. They have a gap between the rail and the roof of the car that is about two inches wide. Although less aerodynamic than flat rails, they nonetheless provide a surface to which rope can be attached.
Flush Rails
These are attached flush to the roof of the car. They have a much more fashionable appearance and outstanding aerodynamic qualities. Perfect for anyone who values fuel economy. The drawback of these rails is that installing roof rack systems requires removing them. Additionally, attaching ropes to these rails is not a possibility.
Roof racks must be installed. These systems are purchased separately from the vehicle. Your choice of roof racks will depend on the type of vehicle you drive and their intended use. Depending on your car’s roof, these systems will need to be installed differently.
Bare Roof Vehicles
These vehicles frequently use universal roof racks for vehicles with no roof. Typically, the set will clamp to the car’s doorjamb, fastening the crossbars. Crossbars themselves are available everywhere. However, the clamps that attach the bars to the car are made to work with a particular type of car. The Rhino Rack Vortex 2500 Silver 2 Bar Roof Racks is one such instance of a roof racks system.
Cars with bare roofs can also have roof racks installed by drilling into the body of the automobile. This installation procedure is difficult and long-lasting. Using this method, you may securely fasten your roof racks to the car’s roof. And while it is robust, if done incorrectly, it could result in problems like water damage.
Rain Gutter Roof Systems
A clamp-style mounting technique is frequently used to attach roof racks to roofs that have rain gutters. The set will secure the racks in place by clamping to the door jamb and rain gutter of the car. Rain gutters can be found on some vehicles, such as vintage Jeeps, but not on contemporary automobiles.
Factory Mounted or Flush Rail Systems
Some roof rack systems attach to factory-installed mounting points that are already present on the vehicle. These points can be found on the roof underneath approved coverings, flush rails, or weatherstripping. You may reach the mounting points by removing weatherstripping and the pre-existing flush rails. The rack system would then be bolted to these positions. Toyota Tacomas and 4Runners are two vehicles that use this system as an illustration.
Raised Rails
Roof rack installation is a breeze with these rails. This only takes a few minutes as the roof bars clip onto the already-existing rails. The ease with which the roof rack system can be removed is a benefit of this arrangement. a professional who makes cleaning and storing simple and hassle-free.
Carrying Luggage
You cannot solely rely on roof rails to transport items like kayaks and surfboards. They don’t provide stability or durability for carrying objects. For instance, your suitcases would rest flat on your car’s roof. Your paintwork would get dented and scratched as a result. Not to mention that the weight will cause the roof to sag.
Kayaks and fishing rods would need to be tethered across your truck. This is risky for a variety of reasons. The merchandise’ overhang would be much larger than what is permitted by law and might snag on trees and lampposts. Additionally, this inclination increases drag. Drag impacts how well your automobile handles and how much gasoline it uses.
Another minor concern is that flush rails cannot be used to attach ropes or bungee cords. How would you secure your bag? In addition to being against the law, leaving stuff lying about on your car’s roof is dangerous. Additionally, it is doubtful that you will carry your items with you when you reach your location.
Carriers are roof racks. They fasten to your car’s roof or rails. These systems function by evenly distributing the weight of the load applied to them. This keeps the roof of your car from buckling.
Your luggage is elevated off the roof using roof racks. They guard against paintwork scratches and damage. The system improves the aerodynamics of your load by suspending your things. Your fuel consumption and vehicle handling stay at their highest levels thanks to improved aerodynamics.
These rack systems also provide many of locations for you to rope or cable your merchandise. You and other travelers will remain safe if your luggage is properly secured.
Are crossbars necessary for a roof rack?
We strongly advise owning a roof rack. They let you transport practically anything that your automobile can’t or won’t fit. Large items like bikes or boats may be involved, as well as filthy items like hockey or camping gear.
Some automobiles have rack systems fitted from the outset; others do not. If your crossbars are factory-installed, you might not require an aftermarket rack system and instead can purchase attachments (like kayak carriers) with universal attachment mechanisms that will snap right onto your factory-installed bars.
You’ll need to purchase a rack system if your bike doesn’t come with factory crossbars. Your roof’s appearance and the items you intend to carry will determine the type of rack you purchase.
What is a rack system?
Crossbars and supports make up the foundation of a rack system. To span your car, you’ll need two crossbars and a means of fastening those bars to it. The elements you’ll hear us discuss are:
To what do crossbars fasten?
To provide a mounting point for your accessories, load bars or crossbars are attached to your towers or feet and run from the driver-side window to the passenger-side window. Fit Kits or Landing Pads are components designed specifically for your vehicle that attach the tower to it.
What happens if your roof rack is overloaded?
A Facebook story that has some individuals in a sharing tizzy is what we have for you today. We got it from our Facebook friends at Unsealed 4X4, who give the image’s creator credit to a certain Matthew Wyatt. This Aesopian tale about what happens to people who don’t employ common sense serves as a good lesson for us 4WD enthusiasts. How not to load your roof rack: a lesson
It has a 3.0 liter ZD30 engine and is a recent model Nissan GU Patrol. And there is an awful quantity of equipment on its roof. It was spotted somewhere close to Alice Springs, perhaps leaving on one of the several winding, unpaved Outback routes in preparation for the yearly Finke desert race.
Let’s take a quick glance at:
That much weight is at least 340 kg. They are far over the limit, especially given that a GU Patrol’s roof load is only 150 kg. Although patrols are renowned for being tough, that is absurd.
And lo and behold, at some point down the road, the entire roof rack comes off. Who knows what occurred afterwards; perhaps they decided to give up and leave it on the track. Personally, I’d be curious to learn how the bikes were initially mounted on the Patrol.
Remember that the reason this gear is put onto the rack is likely due to the fact that the rest of the car is completely full. We’d hazard a guess that it’s over GVM as well, given that the roof holds more than 300 kg of the payload’s total weight of 600 kg. In addition to the additional two persons and equipment inside, The fact that the spare tire is fully worn out is further evidence of the vehicle’s overburden. Therefore, it is overweight.
Naturally, these guys have received a lot of criticism on Facebook for irresponsibly loading their automobile. Sometimes, social media may be a harsh judge. But in this case, we believe it to be rather accurate.
What should we take away from this cautionary story, then? Know the weight of your items and the 4X4’s weight restrictions. Get another vehicle or a trailer if you need to haul a lot of things. She’ll be correct only holds true when combined with a healthy dose of common sense, so utilize your intellect.
Update: We have seen some video of the roof rack coming off, but due to some expletives, we are unable to share the complete clip.
According to what we’ve heard, the three brothers involved were traveling to a motorcycle event when their trailer broke. They placed first, second, and third in the race, so maybe the outcome justified the means in some way?