Prior to 2014, the Kia Sorento requires special instructions to follow in order to help you start your vehicle. If the battery in your key fob dies, you can put your smart key into a slot within the center console. Once the key has been placed, all that is needed to start your car is to depress the brake pedal and press the start/stop button. If it doesn’t, the battery in your automobile is probably dead.
The procedure has been simplified even further for models created after 2014. No slot is available. Your car should start up immediately if you simply push the start/stop button on your key fob while applying the brake. If it doesn’t, your car battery may be dead.
Without a doubt, technology is a blessing for everyone. However, there are always instances where technology falls short, regardless of how or where it is used. Everyone needs to be aware of what to do if their key fob breaks and should be ready for it. If it ever occurs to you, just remember the advice above, and you’ll be back on the road in no time.
In This Article...
Is it possible to start a Kia without a key fob?
Great midsize SUVs include the Kia Sorento. A ton of useful technological elements are also included in it. But you’re in the right place if you’re asking how to start this without a key fob. To find the answers for you, we conducted the research.
Step on the brake pedal and push the Start/Stop button on the engine until the Kia Sorento starts. This may be done without a keyfob.
The Kia Sorento provides you with the ease of starting the engine without having to panic and scramble for your keys, thanks to its user-friendly technology. If you want to know more about starting the Kia Sorento without the key fob, keep reading.
How can I start my Kia manually?
Beginning the Car
Simply touch the key fob to the remote start button if you see your key fob’s battery is running low. Simply press the start button with the key to get going.
How should I proceed if my key fob is not recognized?
The most frequent cause of a keyless entry system failing to send signals is a faulty battery in the key fob. Use the extra key fob to unlock the car and turn on the ignition if one is available.
Use the key that is included in the spare fob if it is not available to unlock the door. Check your owner’s manual for information on how to start your automobile when the key fob malfunctions.
Can I start my car without the chip key?
Without the chip key, a car cannot be started. Try starting it with a smartphone app, or dial the manufacturer of your car’s on-road assistance service. The only other options, depending on how the new key is made, are to tow the car home or to the closest dealership.
How do you start a push-button car without a key fob?
The only option left if you’ve misplaced all of your key fobs is to use a phone app to remotely unlock and start the car. You’ll need to obtain a replacement key if that doesn’t work. There is one more thing you can do, though, if you’re asking this question because the battery in your keyless fob died.
Locate the remote’s corner that appears to be rippable. Most people are unaware that a keyless remote might still come with a backup metal key inside. When you take it out, insert it backward into the remote to make a regular key.
Is the push button or start better?
Although the push button start’s technology has advanced tremendously, the tradeoff has not changed. A push button offers convenience and safety, yet a traditional key start is still thought to be more dependable. Ignition locks can malfunction as well, as we’ve seen in this post, so altogether, I think the push button is a superior choice.
Why doesn’t my automobile recognize my key?
The key fob won’t be recognized by your car because the remote’s battery is dead. The actual remote is damaged or is no longer programmed to your vehicle. Low automobile battery voltage. The keyless entry system has to be fixed.
Without an ignition switch, how do I start my car?
Your car must have a key in order to start. It requires bypassing the ignition lock in order to start without a key, which should only be done when you’ve lost your key. The starter cord must first touch the connector before touching the ignition cord to the battery cord.
What should you do if the push-to-start button won’t work?
- You’re not depressing the brake pedal all the way. As you push the Start button, make sure your foot is firmly on the brake pedal.
- The battery in your Smart Key is low or dead. Try pressing while holding your Smart Key near to the Start button. You may need to replace the Smart Key battery if this doesn’t work. Your Owner’s Manual contains directions for doing this.
- The car’s engine battery is underpowered. You must go to your nearby Toyota Service Center for a diagnosis and perhaps a new battery if this is the case.
- Unintentionally, the Smart Key deactivation switch was engaged. A deactivation switch, which is situated at the bottom of the instrument panel on the dashboard just beneath the steering wheel, might be available in your Toyota vehicle.
Suppose my key fob breaks?
This issue has been foreseen by automakers ever since the key fob was created. Nothing will happen if your key fob dies while you’re driving. Simply because the key fob is a locking and starting device only, the automobile will continue to run. The key fob has no influence over the ignition or engine once the automobile is moving.
Even though you’ll need to go to a general store or pharmacy to get the battery, replacing the battery in your key fob simply takes a few minutes if you’re pressed for time.
Why not take the time to renew your auto insurance at the same time as you’re replacing the batteries in your key fob?
You can access a new quotation with just a few taps on your phone screen by downloading the Jerry app and answering a few questions.
Jerry assists you in finding and comparing rates from more than 50 leading suppliers in minutes as a licensed broker. Jerry can assist you with purchasing new insurance and even canceling your existing policy when you find a lower rate.
With a dead battery, how can I start my car?
- Place the vehicle you’ll be using for a jumpstart next to the vehicle with a dead battery, close enough for the cables to reach. The cars shouldn’t be in contact with one another.
- Switch off the engines of both vehicles.
- Clamp the positive cable’s first end to the positive clamp on the dead battery.
- Now have a buddy attach the other end of that cable to the positive clamp of the other battery.
- Next, attach the negative cable to the good battery’s negative terminal.
- The other end of the negative line should then be connected to a ground on the car that has the dead battery. The engine block or similar metal surface far from the battery can serve as this. While doing this, take care not to touch the cable’s two ends together.
- Launch the emergency vehicle that is supplying the electricity.
- With the weak battery, start the vehicle. Check your connections and tighten or clean them as necessary if it won’t start.
- If the problem vehicle does manage to start, let it run for at least 20 minutes to give the battery time to recharge before turning it off.
- If it still won’t start, there might be an additional issue. For assistance, dial a nearby service station.
- Reverse the order of the cables’ disconnection.
Why won’t my Kia crank over?
Then, it can be frustrating and puzzling if your Kia won’t start. It may leave you with little to no options, particularly if it happens at an awkward moment. A malfunctioning starter or damaged cables are two of the most frequent causes of this issue. However, there may be further causes for this as well. Let’s examine each to assist identify the issue:
Bad Starter
The most prevalent reason for this problem is a faulty starter. To start the engine, the starter has an armature that quickly swings back and forth between magnets. When you try to start your automobile, the starter may click or it may not spin at all if it has a problem.
If this occurs, it may also leave you stuck because a bad starter can result in a dead battery. Additionally, if the battery is not providing electricity to the vehicle, this may also occur, which would indicate an issue with your alternator or wires.
Bad Starter Solenoid
The starting solenoid receives the command to switch on the starter when you turn the key to start your Kia. When you start the automobile, it will only detect any issues with this component. A damaged one might click, but it won’t flip over since it can’t send enough power, preventing it from turning over.
Faulty Starter Relay
The signal for your car’s ignition is sent by this relay. Although it doesn’t really power the starter, this element plays a crucial role in why your engine won’t start.
This component can be defective if you discover that your Kia won’t start. When you turn the key, it will either click or create a whinier sound.
Failing or Dead Battery
Your Kia might not start if the battery is dead or defective. The battery won’t be able to power the starting if it is too weak.
When you turn it over, it normally makes a clicking noise, but occasionally, this issue may cause the dashboard lights to flicker. Additionally, since the batteries occasionally won’t connect properly, make sure Kia or your auto shop replaced it appropriately.
Whether this is the case, try jumpstarting your battery to see if it is dead. When your automobile is receiving a strong charge, the clicking sound will typically stop. You can also take the battery to a nearby auto parts shop to be charged and checked to see if it needs to be replaced.
Bad Alternator
It’s crucial to be aware that the car battery could die if you are having difficulties starting your Kia and believe the alternator may be at fault. This indicates that your alternator is not supplying electricity to the remainder of your automobile if it occurs. This can be caused by a bad cable connection or an electrical problem with the system.
Bad Cables / Connections
Your Kia might not start if one or more of the wires or connections is faulty. This is because there wouldn’t be any electricity flowing across the entire electrical system. The battery wires can also be unsecured. Tightening the connections would be the answer to this issue.
Bad Battery Posts
It can be impossible for your battery to connect if the posts are rusted. To roll over, your Kia needs a strong connection between the posts. You can remove any apparent corrosion using steel wool or sandpaper.
Electrical Issues
It’s also possible that your Kia won’t start due to an electrical problem. An electrical short or a malfunctioning starter relay may be to blame for this. If you notice this issue, you should have your car serviced because it could lead to other issues inside your car.