Great midsize SUVs include the Kia Sorento. A ton of useful technological elements are also included in it. But you’re in the right place if you’re asking how to start this without a key fob. To find the answers for you, we conducted the research.
Step on the brake pedal and push the Start/Stop button on the engine until the Kia Sorento starts. This may be done without a keyfob.
The Kia Sorento provides you with the ease of starting the engine without having to panic and scramble for your keys, thanks to its user-friendly technology. If you want to know more about starting the Kia Sorento without the key fob, keep reading.
In This Article...
Can I use a key to start my Kia Optima?
Beginning the Car
Simply touch the key fob to the remote start button if you see your key fob’s battery is running low. Simply press the start button with the key to get going.
The best way to start a car without a key
It requires bypassing the ignition lock in order to start without a key, which should only be done when you’ve lost your key. The starter cord must first touch the connector before touching the ignition cord to the battery cord.
How is an ignition switch overridden?
To jumpstart your car, utilize a portable jump starter or a different vehicle. Using a jumper cable attached to another vehicle or a portable jump starter. Your car can be jumpstarted fairly easily. Connecting will instantly reveal the battery and ignition coil.
Connect the battery’s positive connection to the ignition coil’s positive side. Additionally, locate the starter solenoid and connect it to the positive battery terminal. Then, short the solenoid’s terminal to the location where the ignition switch connects by unplugging the ignition switch wire from the device. Can you hear the engine revving?
The ignition coil is connected in order to supply power to the dashboard so that the starting solenoid can be used to jump-start the vehicle. Quite simple to follow.
Can I use my phone to start my Kia?
With the help of remote features and services like lock/unlock, climate control, charging, Find My Car, stolen vehicle recovery, and much, much more, Kia Connect technology takes your Kia to the next level.
Most Popular Features
In the palm of your hand, you may remotely start your vehicle’s engine, modify the climate, and check comprehensive vehicle information. You can transmit remote orders from your mobile device when you sync your smartwatch with it via the Kia Access App.
You’re about to leave? Before you go, make sure your automobile is the ideal temperature. Set the temperature remotely with the Kia Access app to avoid sitting in a hot seat or a chilly interior ever again.
If you forget Fido in the second or third row, get a reminder. After the doors have been secured, movement can still be detected by sensors built into the seats. You can even get an alert on your smartphone with the Kia Access app!
Uh oh. Did you overlook to lock the vehicle? When you can lock and unlock from your smartphone, you won’t need to worry even if you’re far away. And you can manage it quickly if you accidentally lock your keys in the car.
By offering improved routing, more accurate arrival times, and real-time traffic information, this innovative and potent navigational function promotes efficiency, accuracy, and timeliness.
I need help starting my Kia Optima.
Every year, it seems like automakers discover new features to add to their models. There is no shortage of cutting-edge amenities that we’ve come to anticipate from contemporary cars, whether for entertainment or convenience.
Remote Start is one of the most popular features requested by users, despite the fact that it isn’t quite new. The remote start option has likely peaked your curiosity if you detest being too hot or chilly when you get into your car.
Are you interested in learning more about the Kia Optima’s remote start? You’ve arrived at the proper location. We’ll cover all you need to know about the Optima remote start in today’s discussion. Let’s start now.
What is the Kia Optima Remote Start?
The Kia Optima Remote Start feature is essentially a radio-controlled car remote that connects to the computer in the Optima. You can start the engine of your automobile from inside your house, office, or pretty much anyplace else if you have a remote starter for your car.
Although it might not seem like a huge problem, the main advantage of remote starts is that you can use the climate control to warm or cool your car. You undoubtedly dislike walking into your car in the summer to sweltering seats and seat belts or in the winter to a makeshift freezer. Additionally, it saves a ton of time because you can go right away without warming up your car.
The typical form of a remote starter is a key fob. Most people are unaware that Kia offers two different styles of remote starts, though. The standard key fob, also known as the Kia Smart Key, is one device, and your smartphone is the other. You can use the remote start, remote climate control, and other cool features with the Kia Connect app.
The Kia Smart Key and Push Button may do three major tasks:
- From outside the car or from anywhere, start or stop the engine.
- remote door locking and unlocking
- Secure the vehicle so that the Smart Key is required to start it
The Kia Optima Remote Start is an extravagant convenience that can make your daily commute much easier.
The CoPilot app isn’t just for purchasing a car; it can also be used to keep track of recalls and receive recommendations on which regular maintenance activities are most crucial.
Which Kia Optima Models Have Remote Start Feature?
The Remote Start feature is not supported by all Kia Optimas. Depending on whatever Optima model you have, it’s either a standard feature or an optional feature when it’s offered for a particular model. You might have to install an aftermarket remote start kit if you have an older Optima.
Even if a model year offers remote starting, not all trim levels may support the feature. A remote start is available on the 2019 Kia Optima, but it is only available on the S, EX, and SX trims. If you have the base model, you are out of luck.
In case you didn’t aware, another crucial point to make is that the Kia Optima is now known as the Kia K5. And the Kia K5 from 2022 has a remote start technology that incorporates a Smart Key with Push-Button Start, Remote Engine Start, Climate Control, and Smart Trunk.
How Do I Know If My Kia Optima Has Remote Start?
There are a number of techniques to determine whether your Kia Optima has a remote start:
- Check your Kia Optima’s owner’s manual for information on the remote start capability and how it functions if it has one. Here is the official Kia owner’s manual website in case you’ve lost your Optima owner’s manual.
- Check your key fob. If your Optima has a remote starter, your key fob should have a dedicated button for it. The Kia factory Remote Start key has a circular button with the words “Engine Start Stop” written in white letters.
- Try the function out – Testing the remote start on your own is one of the simplest methods to find out if your Optima has one. To activate remote start, follow the detailed instructions in your owner’s manual, or use the fast guide immediately below.
How much does it cost to tint car windows? Different tints filter UV rays at different intensities, which over time can help you avoid sun damage to your skin and eyes. The solution is here.
How to Use Kia Optima Remote Start?
It’s simple to use the remote start on your Optima. Simply carry out the following actions using the OE (original equipment) key or the Kia smart key:
- To lock the car, press the Lock button on your smart key.
- Press and hold the partial circle button for more than two seconds within the next four seconds.
- The Optima engine ought to fire up.
As an alternative to the normal Kia smart key, Kia also provides a specialized Remote Start. Using the Remote Start key, operate the remote start as follows:
- Release the “Engine Start Stop” button after pressing and holding it when the lock icon flashes.
- Press and hold the button for more than 2 seconds the second time within 3 seconds. The vehicle will start after the key icon flashes.
- Press and hold the button for two seconds to remotely turn off the engine.
Depending on which key you’re pressing, Remote Start will operate differently. The instructions will differ for aftermarket remote starter kits as well. When using remote start, always refer to the owner’s manual or instruction manual.
How long before the engine shuts off?
Before the engine shuts off, your Kia Optima will idling for roughly 20 minutes. Keep in mind that, for environmental reasons, prolonged car idling may be prohibited in some states. To learn about the idling laws in your state, consult the EPA’s Compilation of Idling Laws.
Will I void my warranty if I install an aftermarket remote starter?
No, installing an aftermarket remote starter won’t make your warranty null and void. The Magnuson Act Laws permit the installation of aftermarket components, such as remote starters, on vehicles without affecting their warranties. But be sure the installation and kit quality are top-notch.
Because purchasing a car may be so stressful, it can be good to have information ready when visiting the dealership. So that you can approach the process from a position of empowerment, we have put together a list of the top 10 American vehicles for dependability.
Is Remote Climate Control available on all Kia Optimas?
You need the Kia Access app and a Kia Connect membership to use the Remote Climate Control feature. The 2019 Optima LX and other vehicles without fully automated climate control are not supported by this feature.
Get a Curated List of the Best Used Cars Near You
The simplest way to purchase a car is using the CoPilot auto shopping app. You may create a customized list of the top car listings in your area by telling us what you’re looking for, and we’ll search the inventories of every dealership in your area.
Just seeking for more recent models? The search engine for virtually new vehicles is CoPilot Compare. only observe recentfive years or lessautos with little mileage. The greatest place to look for off-lease, early trade-in, and CPO vehicles is CoPilot Compare.
What’s best? We have more information on each vehicle than our rivals since CoPilot was developed using the same technologies that dealerships use to acquire and sell their inventories. Since CoPilot doesn’t partner with automakers, there aren’t any sponsored posts or other dubious tacticsjust the most information about the best vehicles. To learn more about CoPilot’s operation, see our About Us page.
Can Kia be easily stolen?
The “Kia Boys” gang is blamed by authorities for a spate of automobile thefts that occurred in Milwaukee in 2021. More children being out of school and a design weakness in some newer models of Kia and Hyundai cars, according to Milwaukee officials, are the two main causes of the rise in auto thefts.
Without a key, how do you disable an ignition switch?
Your car’s ignition lock cylinder is an essential part. Despite how crucial it is, most car owners don’t give it enough thought. They neglect it until eventually it breaks down, at which point you are unable to operate it correctly or start your car. You might then need to replace it.
Removing it is a reasonably easy job if you have the key. The procedure necessitates some more steps without it.
Tools You’ll Need To Change An Ignition Key Lock Without A Key
You must ensure that you have the necessary tools in order to correctly remove an ignition lock cylinder without a key:
- energy drill
- drilling bit
- philips screwdriver
Step OneBattery Disconnection
Disconnecting the battery is the first step in removing or replacing an ignition lock cylinder without a key. This is a preventative measure to ensure that nothing in your automobile shorts out or that you receive an electric shock.
Step TwoSteering Wheel Removal
The next step is to remove the steering wheel from your car so you can fully access the lock cylinder. After removing the steering wheel’s upper and lower covers with all of the screws attached, push the wheel upward and pull at the central cover. The car horn’s wires are now free to be disconnected.
Pull the steering wheel entirely out of its shaft after ensuring that the nuts and washers are stored in a secure location.
Step FiveElectrics to Ignition Switch disconnection
In order to remove the ignition switch, locate and detach the mounting screws for it.
Make sure to carefully unplug each wire from its corresponding connector on the ignition switch’s bottom. To remove the switch, loosen the tabs.
Step SixMounting Bolts Removal
To remove the mounting bolts or screws from the ignition switch, use a socket wrench or screwdriver. The housing and switch assembly that houses the lock cylinder must be completely unbolted.
The majority of car models come with universal, replaceable lock cylinders. These may be removed rather quickly by inserting a pin into the release mechanism.
Step SevenCheck the Ignition Switch Housing Mounting Bolts
Depending on the manufacturer, some car models include snap-off safety bolt heads that are simple to remove. This part’s purpose is to stop burglars from breaking into your automobile and changing the ignition lock so they can start it without a key. For the ignition switch to be removed from the steering wheel column, you might need to utilize a power drill with extractors that are designed to loosen nuts.
Step EightKey Cylinder Locking
Take a paperclip that has been straightened and place it in the ignition lock cylinder’s slot before rotating it counterclockwise. As a result, the cylinder is locked and the ignition cannot turn on.
Step NineScrewdriver
Utilizing your screwdriver, access the ignition lock cylinder. As much as you can, rotate it in a clockwise motion. Then, yank the paperclip as far to the right as you can. The switch should then be simple to slide out after that.
This is truly all there is to it. If you have an older car and have never worked on the ignition lock cylinder before, it might not be the easiest thing to do. This is due to the fact that the cylinder will have a lot of accumulated dust and debris.
Step 10Replacing the Ignition Lock Cylinder
Whether or not an ignition lock cylinder without a key has to be cleaned and replaced will all rely on the various parts and how they are doing. If everything appears to be in order and to be functioning properly following a thorough cleaning and oiling, you can use the same keys to rebuild it. It might be necessary to purchase a new ignition switch, though.
You should keep in mind that it may be a good idea to contact with a manufacturer dealership for advice on how to get replacement keys unless you are certain that any generic ignition switch lock cylinder (or the individual components you need to replace) will work in your automobile. To ensure that you receive the correct item, be sure to include the exact model, year, and manufacturer of your car along with the VIN number.