You have two options: use the physical key that is neatly hidden inside the key fob itself, or get a new battery: Beginning the Car Simply touch the key fob to the remote start button if you see your key fob’s battery is running low. Simply press the start button with the key to get going.
In This Article...
Why won’t my Kia Sportage crank over?
Are you experiencing difficulties starting your Kia Sportage? When you turn the key in your automobile and nothing occurs, it is a frustrating experience. You are aware that you have fuel, so what’s going on? Your Kia Sportage probably won’t start due to one of numerous potential reasons.
We will go through some of the most typical causes of your Kia Sportage not starting in this blog post, along with solutions. We’ll also provide you some useful pointers for maintaining your Sportage in good working order.
The most frequent causes of a Kia Sportage not starting are a dead battery, an alternator issue, or a faulty starter.
How is a Kia engine started?
You are prepared to start your journey if you have the car’s key fob in your pocket or handbag. Observe these easy steps to start the engine:
- Verify that the gears are in neutral (N) or park (P) (N). Put your foot on the brakes. To get the engine to start, press the Engine Start/Stop button.
It’s equally simple to turn the engine. Press the Engine Start/Stop button once more after putting the car in park or neutral.
Why won’t my Kia car start?
Then, it can be frustrating and puzzling if your Kia won’t start. It may leave you with little to no options, particularly if it happens at an awkward moment. A malfunctioning starter or damaged cables are two of the most frequent causes of this issue. However, there may be further causes for this as well. Let’s examine each to assist identify the issue:
Bad Starter
The most prevalent reason for this problem is a faulty starter. To start the engine, the starter has an armature that quickly swings back and forth between magnets. When you try to start your automobile, the starter may click or it may not spin at all if it has a problem.
If this occurs, it may also leave you stuck because a bad starter can result in a dead battery. Additionally, if the battery is not providing electricity to the vehicle, this may also occur, which would indicate an issue with your alternator or wires.
Bad Starter Solenoid
The starting solenoid receives the command to switch on the starter when you turn the key to start your Kia. When you start the automobile, it will only detect any issues with this component. A damaged one might click, but it won’t flip over since it can’t send enough power, preventing it from turning over.
Faulty Starter Relay
The signal for your car’s ignition is sent by this relay. Although it doesn’t really power the starter, this element plays a crucial role in why your engine won’t start.
This component can be defective if you discover that your Kia won’t start. When you turn the key, it will either click or create a whinier sound.
Failing or Dead Battery
Your Kia might not start if the battery is dead or defective. The battery won’t be able to power the starting if it is too weak.
When you turn it over, it normally makes a clicking noise, but occasionally, this issue may cause the dashboard lights to flicker. Additionally, since the batteries occasionally won’t connect properly, make sure Kia or your auto shop replaced it appropriately.
Whether this is the case, try jumpstarting your battery to see if it is dead. When your automobile is receiving a strong charge, the clicking sound will typically stop. You can also take the battery to a nearby auto parts shop to be charged and checked to see if it needs to be replaced.
Bad Alternator
It’s crucial to be aware that the car battery could die if you are having difficulties starting your Kia and believe the alternator may be at fault. This indicates that your alternator is not supplying electricity to the remainder of your automobile if it occurs. This can be caused by a bad cable connection or an electrical problem with the system.
Bad Cables / Connections
Your Kia might not start if one or more of the wires or connections is faulty. This is because there wouldn’t be any electricity flowing across the entire electrical system. The battery wires can also be unsecured. Tightening the connections would be the answer to this issue.
Bad Battery Posts
It can be impossible for your battery to connect if the posts are rusted. To roll over, your Kia needs a strong connection between the posts. You can remove any apparent corrosion using steel wool or sandpaper.
Electrical Issues
It’s also possible that your Kia won’t start due to an electrical problem. An electrical short or a malfunctioning starter relay may be to blame for this. If you notice this issue, you should have your car serviced because it could lead to other issues inside your car.
I don’t have a key, how can I start my Kia?
Great midsize SUVs include the Kia Sorento. A ton of useful technological elements are also included in it. But you’re in the right place if you’re asking how to start this without a key fob. To find the answers for you, we conducted the research.
Step on the brake pedal and push the Start/Stop button on the engine until the Kia Sorento starts. This may be done without a keyfob.
The Kia Sorento provides you with the ease of starting the engine without having to panic and scramble for your keys, thanks to its user-friendly technology. If you want to know more about starting the Kia Sorento without the key fob, keep reading.
It might be a battery or alternator problem.
When trying to start your car, a loud clicking sound may indicate an issue with the electrical system. It’s possible that your battery is dead or that the alternator, which charges the battery, is malfunctioning.
The starter, a small motor powered by the battery that starts the engine, is unable to maintain power if the clicking noise is electrical in origin. Instead, it makes a clicking sound and switches on and off quickly.
Remember that in situations like this, a starter that doesn’t work properly is only a sign of the problem. Your automobile’s electrical system is probably to blame, which is why a jumpstart could briefly move your car.
Once it’s operating, have an experienced technician inspect the entire electrical system. Your alternator or battery might need to be replaced. Alternately, the issue might be resolved by simply cleaning the battery terminals of corrosion to improve the battery’s connection.
You’re not the only one having issues with your automobile battery. According to AAA, among the top three reasons members call for roadside assistance are battery issues, with the majority of those calls occurring in the summer.
With a Courtesy Check and free battery test* at Firestone Complete Auto Care, you can prevent a failed battery or an electrical problem.
No battery is included.
How do you turn on a 2019 Kia Sportage?
With simple to follow directions, installation is simple. includes two 1-button remote controls. Simply press the button on the remote twice to start the car, and then press the button on the key fob once more to open the doors as you approach. You may now enter, put in your key, turn it on, and drive away!
- Complete Kit includes ALL required parts.
- Simple programming does not require a dealer visit!
- Included are printed installation instructions.
- fast, simple, installation
- Only a few hardwired connectors with partial Plug & Play
- Kia Sportage, model years 20172019
- Your VIN #’s tenth letter must be a “H,” “J,” or “K.”
- KEY START ignition is required.
- Power locks and keyless entry are required for the vehicle.
- only an automatic transmission.
- won’t operate on push-start models
- Only vehicles built in the US will operate on Canadian models.
- comes with two 1-button remote controls for a range of up to 1000 feet.
- Comes with (1) 1-Button and 2-Way 2000 feet a 1-button 1-way fob and a 2-way remote fob with a range of up to 2000 feet
Reminder: Remote transmitter designs occasionally alter. The actual remotes received can differ from those shown in the image. Send us a mail if you’d want to know how the current remotes appear.
Can my car start without the key fob?
The process of starting the car is actually quite simple once you are inside. Automakers built the technology to function even with a broken remote since they are aware that your keyless ignition could need to function if the fob dies. Some vehicles have a manual start feature, while others have a keyless start feature integrated into the key fob.
Even if your automobile has keyless entry, you might not have realized that the steering column actually has a key slot. For instance, a lot of Mazda vehicles are outfitted in this manner. In reality, the “switch you turn” is a plastic cap that unscrews to reveal a key slot.
There is still a way to start the car if your keyless entry system uses the START button and there isn’t a mechanical key hole. Press the START button with the key fob. If the key fob battery is dead, certain manufacturers feature a backup system that enables this approach to function. For instance, many more recent Fords include a pocket in the dashboard or a slot on the steering wheel where you may place the actual key fob to start the car.
There is no scenario that automakers haven’t already encountered as a result of their departure from the conventional key during the past few years. Visit the OEM website or call roadside assistance if you are locked out or can’t get the car started. They’ll quickly get you back on the road.
Keyless open and start is what?
If your car is equipped with Keyless Open and Keyless Start, you can start it without taking the key fob out of your pocket or bag and lock and unlock doors, open the liftgate, or access the trunk without taking the key fob out of your pocket or bag.
Here are details on customization and what to do if the key fob’s battery or signal power run out.
Personalizing Keyless Open
Pushing the button on the driver’s door handle once unlocks the driver’s door when you approach the vehicle with the key fob within three feet of the door; pressing it again within five seconds unlocks all doors.
Keyless Open can be turned off (not all vehicles have it) as follows:
- Press and hold the Lock and Unlock buttons on the key fob for three seconds with the engine off.
- When it is disabled, the turn signal LEDs will blink four times. You must now press the Unlock button on the key fob in order to unlock the car and turn the alarm off.
Activating Keyless Open
- Two flashes from the turn signal lamps will signal that Keyless Open is activated.
General Personalization Settings
1. On the infotainment Home screen, touch Settings.
2. Touch the car.
3. Choose Power Door Locks, Remote Lock, Unlock, or Start. The following features can be changed:
- OpenEnable/Disable with no keys
- Automatic Locking
- after you turn off the vehicle, exit with the key fob, and close all the doors, the vehicle automatically locks the doors, the trunk, and the liftgate.
- Automatic Unlocking
- Identify which doors open the first time the driver’s door button is pressed.
- Lock Remote Doors
- the key fob Unlock button modifies which doors it unlocks
- Alert for Remote Left in Vehicle
- If you unintentionally leave your key fob in the car after getting out, the horn will sound.
- Alert: Remote Is No Longer in the Vehicle
- If the key fob is taken out of the car while it’s still running, the horn will chirp.
- Remote Unlock Feedback Light
- When you use the key fob to unlock the car, the exterior lights flash.
- Feedback for Remote Lock
- When you use the key fob to lock the car, the horn blows and the exterior lights flash.
If the Key Fob Loses Battery or Signal Power
Use the mechanical key within the key fob to unlock the door.
- Pull out the side of the key fob nearest to the button and depress the little button on the back or side of the device. This will make the internal mechanical key visible.
- Locate the tiny slot next to the driver’s door handle.
- Place the mechanical key in this slot, then fully push up until the cover releases.
- Take off the cover, then place the mechanical key inside the cylinder.
- To stop it, turn the key counterclockwise.
- To unlock the door, slowly turn the key in the other direction while tugging on the door handle. The door handle cover snaps back into place after the door is opened.
Starting the car:
- Locate the key pocket inside the car and slide the fob into it. Each car model has a different pocket placement; consult the owner’s manual.
- By depressing the brake pedal and the Engine Stop/Start button, you can start the car. The first time you do this, a Driver Information Center (DIC) notice will appear warning you that no key fob has been identified and requesting that you insert the fob into the key pocket. Your key fob will start the car when you attempt again while it is in the key pocket.