- Deactivate your ignition.
- Put on your gloves and safety glasses.
- The negative terminal should be found.
- Pull the connector from the battery while holding it to the side for 30 to 60 seconds after using a wrench to loosen the nut on the negative terminal.
- With your wrench, reattach the cable and tighten it.
In This Article...
Can my check engine light be reset?
You might have requested for assistance with a computer problem if you’ve ever worked in an office setting with an IT department.
Probably the first thing your IT wizard asked was, “Have you tried resetting your computer?”
The analogous repair for a car’s check engine light is the on-off technique. It compels the computer to reboot and restore its previously saved state.
Simply switch the ignition on for 1-2 seconds, then off for 1-2 seconds, using your key. Three or four times through, repeat this step.
If the check engine light is still on after the reset, your car might still be having issues. Think about using the OBD2 scanner to check for the error code or taking your car to a qualified repair.
Without a scanner, how can I reset my check engine light?
Using a Scanner to Reset a Check Engine Light. Without a scanner, unplug the negative battery cable from the engine and wait a few seconds to restart the check engine light. Your car’s diagnostic system will be reset as a result, and if the underlying problem has been fixed, the light should go off right away.
Why is the Kia’s engine light on?
We need to be less upbeat and encouraging at this point. Always be wary of a check engine light that flashes. It denotes a damaged component that requires quick repair in order for your car to continue moving and operating. You should never keep driving a car with a blinking check engine light since vehicles are intricate devices with over 2,000 pieces that must work in unison.
When it is safe to do so, stop, summon a tow truck, and have your car delivered to the closest Kia-authorized repair facility. You run the risk of having your engine fail completely if you ignore this warning.
The on-board diagnostics and repair technologies are fortunately getting stronger and better each year for all Kia drivers. For instance, the 2019 Kia Sorento has a lot of significant features that make driving safer than before.
Normally, a solid check engine light is not a cause for concern. When the Electronic Control Unit (ECU) in your Kia detects something unusual with its normal function, the indication is set off. It uses a diagnostic code to note any issues it finds.
Frequently, the root cause of a stable check engine light indicator is actually quite affordable to fix.
It will still be safe to drive the vehicle to a service center to have this analyzed and estimated even if it could point to more expensive issues like a mass airflow sensor.
The typical LED light that powers the check engine light on your instrument console consumes that much power. Unfortunately, it has much more power than thatpower to utterly steal your mental tranquility.
It is true that your check engine light has the power to instantly bring on tension and destroy your day. One light’s ability to signal a variety of issues, from “No big deal, I’ll get it fixed before the next presidential election!” to “Call a tow truck right away! is frightening.
The fact that most automotive repairs to the drive train or power train are not recognized for being cheaply priced adds to this worry by giving the check engine light the impression that your money is being drained into a dark dimension.
Oxygen Sensor Must Be Replaced
The amount of unburned oxygen in your car’s exhaust system is measured by your oxygen sensor. Your engine will consume more fuel than necessary if it isn’t changed, you’ll lose fuel efficiency, and defective sensors could harm your spark plugs and catalytic converter.
Gas Cap Missing, Damaged, or Loose:
Your gas cap serves to maintain pressure inside the fuel tank by sealing the fuel system. Additionally, it stops gasoline fumes from being emitted into the air while your car is not being driven. If you don’t replace it, fuel could evaporate and be lost.
A new catalytic converter is required:
By converting toxic carbon monoxide into carbon dioxide, your catalytic converter contributes to environmental protection. If you don’t replace it, your car won’t pass an emissions test, will operate less efficiently and with less power, and it can get hotter while driving.
A new mass airflow sensor is required:
To calculate the amount of gasoline required to run your engine effectively, your mass airflow sensor monitors the volume of air entering the engine. Faulty sensors can harm spark plugs, O2 sensors, or the catalytic converter, which can lower performance and fuel efficiency if you don’t replace them.
Replace Spark Plugs or Plug Wires:
The fuel/air mixture in your car’s combustion chamber is started by spark plugs. The ignition coil’s spark delivers itself to the spark plugs through the spark plug wires. It will operate poorly and consume less fuel if you don’t replace it, and worn plugs can harm ignition coils and O2 sensors or block the catalytic converter.
As you can see, ignoring the check engine light can result in serious issues for your car and eventually higher repair costs. Come to any of our Moritz Kia locations to have your vehicle serviced with us if it needs maintenance or if the check engine light is on. To make an appointment at one of our three Moritz Kia stores throughout Fort Worth, use our online tool.
Every time you notice the yellow-orange glow of your engine light, a brief moment of panic ensues. But before you start to worry, think about what the check engine light really means. Perhaps it won’t be as horrible as you think! The failure of something more significant could be indicated by something as simple as a loose gas cap.
On-Board Vehicle Diagnostics (OBDII) readers aren’t something that everyone has in their glove box. If not, you can easily visit the service center at Horne Kia and have us reset your engine light while you wait.
Phoenix, Chandler, Tempe, and any other locations in the Greater Phoenix Area are only a short drive from our Horne Kia shop.
Ok. It’s time to respond to the crucial inquiry: Why did your check engine light turn on? The check engine light essentially indicates that a problem has been identified by the onboard computer system of your car. This issue can range from a minor setback, such as a misplaced gas cap or a change in humidity, to the breakdown of a significant component, such as a defective catalytic converter. On sometimes, the Check Engine light illuminates even when the car is in perfect working order.
It might be a momentary issue brought on by a defective gas tank, among other things. In these circumstances, the light ought to turn off on its own after a brief while. Even those who are mechanically inclined may find it challenging to interpret the Check Engine light on their own because there is no real method to pinpoint the source of the signal without doing a diagnostic scan on the vehicle.
There are a lot of different things that might cause the check engine light to turn on, but if it does, you should check to see if the gas cap is loose since a loose cap alerts the car’s computer that there is a leak in the vapor recovery system. Tighten the gas cap if necessary and keep driving. The light won’t turn on right away, even after you’ve tightened it.
One of five thingsthe mass airflow sensor, the catalytic converter, the O2 sensor, or the spark plug wiresmost frequently sets off the check engine light. Most of these issues can be fixed rather cheaply.
While a malfunctioning oxygen sensor may occasionally be the only thing to blame for the light, if it starts flashing, a more significant issue may be present. In that case, please schedule a service visit so that we can help you find the right solution.
Many motorists mistakenly believe that the maintenance required light (MAINT REQD) and the check engine light are the same thing. The maintenance required light simply serves as a reminder that the vehicle needs an oil change or other standard maintenance. Depending on the manufacturer, your check engine light will either have the words “CHECK ENGINE” or will be shaped like an engine. It will also either be orange, yellow, or red.
Just keep in mind that these codes are manufacturer-specific. For descriptions of any other Kia diagnostic issue codes, see our Generic OBD II code list.
Can the check engine light be reset without cutting the battery?
You can use any of the five methods listed above to make your check light disappear, and then you’re good to go. However, if your check engine light starts to glow once more after a few days, there is an issue with your car that needs to be rectified.
It’s time to really have your car diagnosed by a scanner. Either by purchasing one on your own or by visiting a business that can read your car’s codes.
Can you reset the check engine light without disconnecting the battery?
Using an OBD2 scanner, you can turn off the check engine light without unplugging the battery. Most automobile models’ check engine lights will turn off on their own if you drive for a sufficient amount of time after addressing the issue.
How do I reset my check engine light without a scanner?
The best method for turning off the check engine light without a scanner is to fix the issue and continue driving for a while. For some car types, you may also reset the engine control unit by removing the battery terminals.
How long does it take for the check engine light to reset?
It takes between 10 to 30 successful cycles before the check engine light goes off if you are certain you have fixed the issue. To warm up the engine, one cold start is all that is required.
Will the check engine light go off by itself?
In most car models, the check engine light will turn off automatically if the issue has been resolved within a predetermined period of time. This often takes 10 to 30 rounds. From a cold start until the engine reaches operating temperature, one cycle occurs. READ MORE: Does the Check Engine Light Self-Reset?
On a 2016 Kia Soul, how do you turn off the check engine light?
If the problem or code that activated the check engine light in your 2016 Kia Soul is resolved, the check engine light will often turn itself off. For instance, if a loose gas cap was the reason your check engine light came on, the light will automatically switch off once the gas cap is tightened.
Why does my Kia Soul’s check engine light come on?
A constant glow normally denotes something less serious, but a check engine light that flashes suggests your car’s engine is seriously damaged and needs quick repair. We strongly advise against driving if the check engine light is blinking on your Kia Soul. Instead, book Kia service right away.
How long does a check engine light take to turn off?
The light remaining on even after the repair is a concern for many automobile owners. Don’t freak out if you’re having this experience. After the repair, you might believe there is still a problem with the car, but it is only because the light needs some time to reset.
The internal computer of the car only resets after a predetermined interval during which it rechecks all of its sensors. After around 10 to 20 cycles, the reset may occur automatically.
A cycle is a phase in which you start the car and then shut it off once more. Other vehicles require you to go between 50 and 100 miles before the reset occurs.
You can suppose that you could continue to drive the automobile for a while with the check engine light on. There is a quicker way to reset the check engine light if you discover it to be a problem.
Why is my engine light on when there doesn’t seem to be a problem?
On a Monday morning, you start your car since you’re rushing late, only to be greeted by a “check engine” light. You ponder whether this is something that needs to be taken straight away to the mechanic or if it can wait a while.
We’ve all been guilty of leaving our check engine light on for days or even weeks. How can we tell whether it is a serious issue or something trivial, like low wiper fluid?
The check engine light may come on for a variety of reasons and may indicate a minor or serious issue. If it does so while you are driving, don’t become alarmed. Keep an eye on how your car is acting. Utilize your senses to hear for any odd noises and look out for any trembling or surging. Check your steering and brakes. It should be safe to drive until you can get it into a mechanic if nothing seems to be acting strangely.
In some cases, if the gas cap is a bit loose, the light might turn on after filling up. It can also indicate that you should have your catalytic converter checked. In either case, ignoring a problem indefinitely is never a wise choice. It might make whatever is wrong with your car worse, which could result in a serious issue.
Take it to Accurso Auto Repair when you have time so they can examine the problem. To connect the car, examine the codes, and identify the issue, they have the right equipment and cutting-edge technology.
How many kilometers are needed to turn off the check engine light?
Most likely, the problem with your check engine light has been resolved, but it’s still on. And you’re growing annoyed by it. Maybe you spent a fortune on it.
You probably don’t know this, but you need to drive for 50 to 100 miles after clearing the car’s computer.
The computer in your car will keep track of all the sensors’ readings while you drive and record them.
Details are as follows:
After resetting the codes, your automobile hasn’t been driven for enough time. Solution: Continue driving until the system flashes READY.
But wait, there are still some very crucial items to consider. So let’s look more closely.