A Kia’s airbag light will show “SRS,” which stands for Supplemental Restraint System, as it illuminates. Normally, it doesn’t illuminate unless there has been an accident involving the car. If it does, it indicates that the airbag system isn’t working properly. You ought to have the car towed to the local dealer or technician so that it can be examined and fixed. After completing this, you must reset the airbag light in order to maintain the KIA’s computer’s good operation. The SRS light will also go out throughout this operation.
In This Article...
Step 2
Check to see if the largest port inside the fuse panel matches the connector on the computerized scan instrument in terms of size and form. Connect the scanning device to this port.
Step 4
On the computerized scan tool, look for a command that reads “remove codes” or “clear all codes.” To restart the computer, choose one of these choices. You should unplug the scan tool from the port after it returns to the main menu to signify that it is finished.
Check that all service and warning lights on the instrument panel are off before starting the engine.
Can the airbag light self-reset?
It’s time to discover how to reset the airbag light now that we understand how airbags work. If you are not completely confident in your abilities, have only professionals work on the airbag system! To reset the airbag light, adhere to these instructions:
Step 1: Check the passenger airbag switch
There is a “passenger seat Airbag on/off button” in some autos. When attempting to remove the airbag light, you ought to start by doing this. It’s possible that someone turned it to Off by accident before you, which will cause the airbag light to remain on in most cars. If you open the passenger door or glove box, you might be able to view this button, which is often located on the passenger side of the dashboard.
Step 2: Read the trouble codes with an OBD2 Scanner
Working with your airbag system is essential, therefore always use an OBD2 scanner to read the fault codes to determine where to begin troubleshooting. Never resolve the issue brought on by the airbag light before clearing the trouble codes. Continue the diagnostic by reading the codes to learn what might be the issue’s cause.
Step 3: Repair the fault
Never simply reset the airbag light without fixing the issue. When a collision occurs, this may cause the airbags to deploy or not work at all. If you are unsure of how to repair the airbag’s parts, let a pro handle it. Always remember to disconnect the battery connection before servicing an airbag. After fixing the issue, the airbag light frequently goes away by itself, although not in all car types.
Step 4: Clear the trouble codes
It’s time to reset the engine light when you have completely installed the new parts and are certain that they are installed correctly. There is no other way to accomplish this; you must use an OBD2 scanner. Make that the airbag light is reset and that it no longer appears on the dashboard. If the problem persists, read the codes again and look for any error codes.
Step 5: Restart your car & test-drive.
Restart your engine and take a test drive if your dashboard’s airbag light appears to have disappeared. After a test drive, if the airbag light has disappeared, there is a good likelihood that the issue has been resolved. Reread the codes and carry out the steps again if the issue reappears.
What is the cost of turning the airbag light back on?
Reset Airbag Light, at No. 1 This procedure typically takes several hours and costs a few hundred dollars, though depending on the car, it might cost as much as $600.
When the airbag light is on, can I still drive my car?
The airbag light may have illuminated for any number of reasons, just like other warning lights. Here are a few of the most frequent causes:
The airbag needs resetting
The airbag light will turn on if there has been a collision but it wasn’t serious enough for the airbags to deploy. At your neighborhood garage, the airbag needs to be reset.
Corroded sensors
The sensors in your automobile may have deteriorated if it has water damage. This would lead to a malfunction in the system and turn on the airbag light.
Dislodged wiring
If your car has side airbags, the passenger side airbag may occasionally malfunction. When the passenger seat is shifted back and forth, the wires for that airbag may become damaged or displaced. We caution against attempting to reconnect a detached plug because you risk setting off the airbag. Make an appointment for your car at a nearby garage and ask them to check it.
Faulty seat belt
Your seat belt sensor can be the cause of the problem. The sensor that determines whether or not you have buckled up can malfunction occasionally. When this occurs, the airbag light can start to illuminate.
Your airbag clock spring may need replacing
The spring is intended to preserve continuity between the wiring and the driver’s airbag and coils throughout your steering wheel. The spring may wear out and fail over time, turning on the airbag warning light. Older autos are more likely to have this flaw.
The important line is that you must stop driving as soon as your airbag light illuminates and have your automobile inspected by a repair as soon as possible. Your airbags won’t activate until the issue is identified and remedied. Never disregard your airbag light since your safety and the safety of your passengers are top priorities.
The airbag light stays on for what reason?
A problem with the seatbelts or airbags is indicated by the airbag light. Therefore, it’s usually not a good idea to drive when the airbag light is on. We advise having it towed to the dealership rather than driving it yourself if it continues to flash inside your car.
Can a blown fuse turn on the airbag light?
The car could have blown a fuse, for example. There are other fuses that could be to blame, but fuse #13 is most likely the one. You probably need to change fuse #13 and perhaps other fuses if your airbag light is on and your rear windshield wiper is not working. The airbag light can undoubtedly turn on as a result of blown fuses.
The airbag light may also abruptly turn on in a number of other situations. A mechanic or auto parts store should be able to decipher the code that the airbag system emits when it is acting up, which will give them a hint as to what specific issue the airbag is experiencing. There are numerous potential issues with the airbag because it is a complicated system of sensors, wiring, and programming that must suddenly activate during an accident after lying dormant for years. Check the fuse box to see whether you have a blown fuse first, but if not, you’ll likely need to take it to the dealer or a qualified mechanic for service.
Does the airbag fuse exist?
Your car’s airbag most likely has a fuse, however the fuse does not turn on the air bags. Your complete system will also be inoperable if your service airbag lights are on.
Can I drive if my airbags are off?
Is it prohibited to operate a vehicle without an airbag? Does this go against any laws?
Driving a car or any other motor vehicle without an airbag is now banned under neither state nor federal law, making it comparable to doing so while towing a trailer or wearing a sling on one arm.
Although it is not specifically prohibited to drive without airbags, it is not allowed to modify or remove airbags from certain automobiles.
Vehicles without airbags were still offered by manufacturers in the 1990s. However, when airbags were accepted as a standard safety feature in 1999, everything changed. The laws governing this safety device have now been revised.
How long is it safe to drive with the airbag light on?
When the airbag light comes on, the vehicle’s airbag system is malfunctioning. Due to this flaw, the airbag is unlikely to deploy after an accident. As a result, it is not advised that you use the car until the system has been fixed.
Never disregard the important caution. There’s no need to gamble with the car, even though it doesn’t make it unsafe to drive.
The light does, however, show that the SRS parts are not functioning properly. This may potentially indicate that the airbags won’t activate in the event of a collision. You shouldn’t wait until you are involved in an accident to determine whether the airbags will keep you safe.
How can I fix the airbag light?
Take your car to a repair as soon as possible if your airbag light has turned on. A mechanic can assist you in dealing with the airbag light by inspecting the system using the internal diagnostic system of the car.