I’ll demonstrate how to replace the internal battery in a Kia Sedona key fob in this brief tutorial. One CR 2032 battery is required for this key fob, which is functional from 2015 to 2021. Turning it over and holding down this button is the first step towards opening this thing up. You take out the internal key while continuing to hold. That can be put to one side.
The keyhole is visible here, and directly across from it is an indentation. Forgive me. Take a flathead screwdriver, place it in that divot, and begin to twist. You can see that we have now begun to open up the gadget. We can just use our fingers to separate it.
Place this aside. We now have our 2032 battery in hand. We’re going to use the same tool and just pry it up from the bottom by entering from that direction. The battery can be raised in this manner by crawling underneath it. Take a fresh CR 2032 battery now.
Make sure it goes this way: positive side down. Simply click it into position.
In This Article...
How can I get my Kia key fob to open?
How to Remove the Battery from and Open a Kia Key Fob
- The front of the key fob should now be facing downward.
- In the slot on the side of the fob, insert the point of a small flathead screwdriver (opposite the side that houses the mechanical key)
- Take the key fob’s case off with little pressure.
- Delete the previous battery.
I have a key fob, how do I change the battery?
You will only require one tool to replace the battery in your key fob. To open the fob down the middle, gently pull apart the two halves using a small, thin flat-bladed screwdriver (or, occasionally, a sturdy fingernail). The majority of vehicles with key fobs and transponder keys won’t let you lock your keys inside the vehicle, but you should be ready just in case. (By the way, if you frequently misplace your keys, this key finder can be useful.)
Why won’t my Kia key fob work?
The battery that powers your key fob is most likely to blame if it stops functioning. Typically, watch-sized batteries that are skillfully hidden inside the casing of key fobs are used. With a little screwdriver or key, you can easily peel the key fob apart and change the battery by yourself.
Finding out what kind of batteries they require and keeping one on handeither at home or in your glove boxis a good idea. If you have the batteries on hand, it will save you some effort and they are cheap, costing between $5 and $25. Finding them is not difficult. They ought to be in stock at your local Kia dealer. Additionally, you can locate them in grocery stores, hardware stores, and other stores. Make sure you choose the proper kind. The voltage output of many of these batteries varies despite their similar appearance.
How can I fix the automobile key’s battery?
Because the notch might not be evident, this is the trickiest step. There may be a small gap at the top of some devices, however you may need to check the connection point where the emergency key pops out.
To pry open the slot, insert the flat-tipped screwdriver into it. A circular battery should be seen inside as the entire device splits in half down the middle.
Examine the battery carefully and search for marks that will identify the battery’s model. Purchase a fresh battery of the same type.
If you pop the old battery out with your finger, it should do so without difficulty. Where the old battery was, the new one just slots in.
You can close the key fob now that a fresh key is installed. Squeezing it should cause it to click back into position.
You might need to replace the battery every five years or so, depending on the quality of the new battery you bought, how frequently you drive, and whether the battery is a proximity key that drains more quickly.
How is a key fob for a 2007 Kia Sedona programmed?
For this car, there is no onboard programming process. To program the keyless remote for this car, additional equipment must be attached to the vehicle.
Before going to the dealership, try a locksmith; their prices are typically half as much. Use the suggested locksmith locator on our website to find a preferred locksmith nearby:
Take note of your vehicle identification number (VIN) and call or, better yet, visit your local dealer to inquire about any recalls that may have affected it. Mention that you would like to have a key fob installed, and the dealer may offer to do so without charge. Just stop by during the day and be friendly. Keep in mind that all employees at the dealer are salesmen because without sales, none of them would have a job.
It’s possible that this won’t work, but there’s no harm in giving it a shot. You’ll be astonished at what treating the service department well can do for you! Was this Knowledgeable? Please spare a second to Like, Follow, and Share on the social networks listed below. People like you aid in getting the word out about us. It is extremely beneficial! We appreciate you coming and spreading the word to your loved ones.
Is it possible to change the battery in a Kia key fob?
Make sure the front of the key fob is facing downward on a flat surface first. Once that’s finished, adhere to these easy steps:
- Locate a slot on the side of the fob with your flathead screwdriver.
- Pry the key fob’s case open with care.
- Delete the outdated battery.
- Place the 2032 battery there.
- Make sure the key fob is secure by replacing the shell.
How long does the battery in a key fob last?
The battery in your car’s fob or remote will eventually need to be replaced, just like any other battery. A car fob battery should typically last three to four years. In addition, there are several indicators that will let you know when your fob battery is running low.
Signal strength loss is the initial symptom. The majority of contemporary fobs can communicate with your car up to 50 feet away. But as your battery ages, the signal’s intensity and range will decline. Another indication that your key fob battery needs to be changed is that you are having to push buttons to lock and unlock doors repeatedly.