That is incorrect, no. There are other locations where jacking up a car is safe. Normally, I jack up my automobiles using the subframes or the suspension mounting points. For instance, at the rear, I put the jackstand on the pinch weld and place the floor jack under the cup where the spring is placed to jack up the vehicle or where the rear torsion beam attaches. I set the floor jack under the frame where the lower control arm is mounted for the front.
In This Article...
On a Kia Forte, where do you put the jack?
- To stop the car from moving forward and backward, engage the parking brake and secure the rear wheels using wheel chocks or a block.
- On the car, there are four jack points. The two front jack locations are under the passenger or driver’s door and behind the front wheel.
- Use a floor, scissor, or accordion jack to jack the car onto the jack points.
- Use jack stands to support the car. Place the jack stands on the vehicle’s cross member or frame.
I need to lift the front of my automobile; where should I put the jack?
In order to safely lift the car, most automobiles have strengthened metal ribs that serve as the jacking points. There are typically four jacking points on each car. They are situated directly behind the front wheels and just in front of the back wheels, underneath the rocker panels of the vehicle.
Is there a jack on the 2021 Kia Forte?
Although the Kia Sportage is a fantastic mid-size SUV, you never know when a tire needs to be changed. When that happens, knowing where the jack is useful! So what exactly is a jack?
You keep the jack in your trunk as a tool. It can be used for various purposes, including lifting heavy goods, but it’s always convenient if you ever need to replace a tire or do something else to your automobile. So let’s examine the potential locations for your jack so you may use it when the opportunity arises.
Most Kia Sportages require you to use a flat screwdriver to unscrew one nut before you can remove the jack. The jack point is typically found right behind where the driver would sit if he were inside his Kia Sportage car, either on the side of the car or in the front quarter panel area. The jack tool may be somewhere other than here, but everything will still function essentially the same.
The nut you must remove from the jack position on your Kia Sportage is situated beneath a metal cover plate, and the jack is often black in color. After removing this plate, use your flathead screwdriver to release the nut keeping the jack tool securely in place on your Kia Sportage.
Lift the jack tool and remove whatever is within after you have removed the screws fastening it to the metal cover plate.
On a Kia Forte, where is the spare tire located?
The Kia Forte models for 2019 and 2020 are without a spare tire. In fact, the lack of a spare tire is very likely if you bought a Kia Forte with a model year that is after 2013. Instead, a Tire Mobility Kit (TMK) is located under the floorboard of the trunk for Kia customers.
Is it possible to elevate a car without a lift kit?
More space is always preferable! Let’s discuss some alternatives to elevating your car by up to six inches without a lift kit.
Using add-a-leaves is one method for larger vehicles and trucks. Your suspension coil springs’ height will rise as a result, and you could gain up to three inches of height as a result. Additionally, installing is a rather simple process.
Another choice for boosting height is coil-spring rigs. They are inexpensive and resemble the add-a-leaves used on truck and larger vehicle suspensions. The suspension coil and pressure canister are separated by these spacers. They might also make things easier than they are currently. However, they only add a maximum of two inches of extra clearance in height.
In light of this, exercise caution while making any alterations to your car, and have any work you don’t feel confident handling yourself, done by a professional. With Jerry, you can find additional security. For as low as $4.16 a month, you can join Jerry’s roadside help membership and get access to the best roadside service in the business.
How safe are scissor jacks?
A jack is typically part of the factory tool kit in cars. A factory jack and a service jack are not equivalent in terms of automobile jack safety for a variety of reasons. A service jack or floor jack is designed for durability and versatility, as opposed to the screw jack or scissor jack that came with your car, which was designed for portability and short-term use.
But let’s explore the key distinctions in more detail:
Capacity
The scissor jack was constructed to fit your particular vehicle, therefore if it was intended for a little sedan, it can break if you try to lift an SUV. On the other hand, floor jacks are available in capacities ranging from two tons and higher, and they can raise anything from an ATV to a bulldozer.
Durability
The scissor jack isn’t anticipated to be used much because it was created for changing flat tires. They are only sufficiently sturdy to complete the task and are often composed of stamped metal. Floor jacks can withstand more abuse because they are made to be used frequently and heavily.
Versatility
The scissor jack was created to carry out the specific duty of changing a tire. To lift the tire a few inches off the ground, it may or may not fit lift points on your particular car, and it might only fit up to a set height. As a result, using it for other tasks like lifting another vehicle or doing an oil change is all but impossible. A floor jack, on the other hand, can rise high enough to reach below the car and can adjust to any vehicle’s lift points.
Don’t expect the scissor jack to be used for anything other than its intended purpose when performing DIY auto repairs. However, if you want to try larger repairs, you should get a floor jack and jack stands that are rated for the heaviest car you possess, keep them in good condition, and constantly think about your safety.
Employ Safe Lifting Practices
Safety should always come first, so think twice before climbing underneath your automobile. Never, whether utilizing a scissor jack or floor jack, place a portion of your body under a vehicle that is only supported by a jack:
- Block: Put the transmission in park or gear, engage the parking brake, and make sure your car is on a flat surface. Use chock blocks to stop the wheels in front and behind the wheel that is opposite where you are elevating. Put chock blocks in front of and behind the right front tire, for instance, if you plan to lift the left rear of the car.
- Lift: Raise the car to the required height using the jack. Use three-quarter inch plywood to prevent the jack from sinking into the ground on soft surfaces like dirt or asphalt.
- Support: Place jack-stands under a sturdy part of the automobile, such as an axle or suspension member, preferably ones that are rated higher than your jack. Shake the automobile to check for stability before lowering it onto the jack stands. You can take the jack out and start working on your car after you are certain that it is stable.
Both scissor jacks and floor jacks have their uses and are incredibly helpful, but when put to use outside of their intended purposes, they can be uncomfortable, if not downright dangerous. Use a floor jack or a scissor jack appropriately, and keep it well-maintained. You can work on just about anything underneath your car securely if you keep in mind these car jack suggestions.
For routine maintenance and repairs, turn to one of our 17,000 NAPA AutoCare facilities or check out all the tools & equipment offered on NAPA Online. Visit your neighborhood NAPA AUTO PARTS store to speak with a qualified professional for more details on car jack safety.
How long should a car be left on a scissor jack?
After employing a hydraulic lift or jack lift, a heavy object can be supported by a jack stand. In order to replace a wheel, change the oil, or inspect any other component underneath a car while working on it, you would use a jack stand. We have enquired as to the maximum amount of time a car can be supported by jack stands. Here is what they gave us.
A car can be left on jack stands for however long is necessary. For days, weeks, months, or even years, your car could be left on jack stands. As long as your car is jacked on a flat surface, everything will be OK. One thing to keep in mind is that it’s preferable to put your car on concrete rather than asphalt because asphalt is softer and your jack stands risk leaving a mark if left there for an extended period of time.
Since your tires will gradually lose air if you leave your car standing on its own and you run the risk of damaging your rim, leaving it on jack stands is a smart way to store your automobile. Additionally, check the vehicle’s security to ensure that even a small bump won’t cause it to overturn. Continue reading for more details about jack stands.
Do Kia vehicles have run-flat tires?
Although your new Kia doesn’t come with a spare tire, it does come with the Kia Tire Mobility Kit (TMK), a set of tools that can come in handy if you ever have a flat tire.
Why is there no spare tire on my Kia?
The spare tire is no longer included in new cars from several automakers, including Kia. Their main goal is to replace them with inflator kits. The TMK significantly lightens the SUV, expands the load area, and enhances fuel efficiency.