How To Get A New Kia Key

Kia / By

To get a replacement key created for your car, contact a Kia dealer or a nearby auto locksmith.

Kia keys are they chipped?

We have your back! A transponder, a type of embedded microchip, is present in this key. Each transponder has a distinct code that serves as the key’s “fingerprint.” The transponder is activated when the key is turned in the ignition, sending its special code to the car’s receiver in the dashboard.

Can you duplicate a Kia key?

The keys for Kia and Hyundai vehicles have changed over time. Starting from 1990 – 2000 most Kia and Hyundai car keys are pretty simple non laser keys without transponder chips. Most of these Kia and Hyundai keys can be copied or cut by VIN number at your neighborhood Keyless Shop.

How can I obtain a fresh FOB key?

For remote starters and transponder keys from the majority of vehicle manufacturers, an auto locksmith can cut, program, and give replacement keys. If your car key is broken, they should be able to fix it and provide you a new set.

Car Keys We Can Program

The most popular models that auto locksmiths can assist with are listed below:

  • Aston Martin
  • The Aston Martin
  • Audi
  • Bentley
  • BMW
  • Bugatti
  • Citroen
  • Daewoo
  • DAF
  • Daihatsu
  • Ferrari
  • Fiat
  • Ford
  • Honda
  • Hyundai
  • Isuzu
  • Iveco
  • Jaguar
  • Jeep
  • Jensen
  • Kawasaki
  • Kia
  • Lamborghini
  • Rover, Land
  • Lexus
  • Lotus
  • Maserati
  • Mazda
  • Mercedes
  • Cooper or Mini
  • Mitsubishi
  • MG
  • Nissan
  • Peugeot
  • Porsche
  • Renault
  • Royce Rolls
  • Rover
  • Saab
  • Scania
  • Seat
  • Skoda
  • Ssangyong
  • Subaru
  • Suzuki
  • Toyota
  • Vauxhall
  • VW Volkswagen
  • Volvo
  • Yamaha

Not your specific car model listed above? Call an MLA auto locksmith for assistance.

You must call a 24-hour emergency locksmith for replacement key programming in case of an emergency outside of regular business hours.

Your Kia key fob can you program it yourself?

Key Fob Programming for Kia Till the door locks cycle, repeatedly turn the key off and on. Turn on the key to finish. On the key fob, press the lock or unlock button. The key fob is configured to operate the doors if they lock or unlock.

How can I tell whether the key to my car contains a chip?

Numerous keys have engraved or stamped letters and numbers on them. These codes serve as important identifiers. Your key’s identification code can help us determine whether or not it has a transponder, so please provide it to us. A chip is also present in the head of transponder keys. Usually larger than the mechanical key, they have a plastic head. Here are images of a Ford H75 mechanical key blank and a H74-PT transponder key blank, respectively.

In the image below, you can also see the slot that the transponder chip fits into:

A different approach is to seek up your key using the vehicle’s year, make, and model information. An automobile key guide is included. Look up your vehicle; if it has a transponder, you can find instructions on how to program the key under the “Transponder Equipment Required” column.

Testing Keys Bring in your key so we can test it with a machine if the information above does not allow you to determine whether or not you have a transponder.

Programming We have purchased computers and equipment worth over tens of thousands of dollars to link and configure vehicles with transponder chips. More than 95% of the vehicles on the market can be programmed.

Call 541.632.3968 if you require new or duplicate transponder keys. Or we can program keys into your car if you need that service.

A number of our clients enjoy fixing things themselves or are really curious in what goes on. This is for you, the rest of you can simply skip it.

Transponders with fixed codes always save the same code on their chip. The chip sends the code to the car’s computer in a single direction.

Data from the computer and chip is transmitted both directions when using rolling code transponders. Before changing the code, it first verifies the key’s code. The key receives the updated code. The vehicle will start after both codes have been modified and accepted.

The three different types of physical transponders are glass tubes, ceramic wedges, and integrated circuit chips.

When did automobile keys first start containing chips?

Transponder key systems are essential to your car’s security system or anti-theft system because their primary goal is to eradicate auto theft. GM was the first US automaker to use a chip key on the 1985 Corvette because to the large number of stolen Corvettes. The VATS key and system (vehicle anti-theft system) greatly reduced Corvette thefts (VATS).

Anti-Theft Systems (MATS & PASSLOCK)

In addition to VATS, GM also released MATS and PASSLOCK as anti-theft systems. The 1992 introduction of MATS, or Mechanical Anti-Theft System, merely involved a change in the design of the ignition lock cylinder to make it far more challenging to start the automobile without a key.

The ignition cylinder has a sensor embedded into it thanks to the 1995 invention of PASSLOCK. One of ten electromagnetic values that are also recorded in the vehicle’s computer memory serves as its operating principle. Any attempt to turn the ignition lock cylinder by force will harm the magnet sensor and render the car immobile.

Customers who contacted to report stuck keys or keys that wouldn’t turn in MATS and PASSLOCK ignitions led us to replace several of these ignitions.

The Circle Plus and PK3 (PASSKey3) keys are currently the most popular transponder keys for GM automobiles. The ignition and door are operated by these common, 10-cut keys.

Flip Remote Key

GM unveiled the Flip Remote Key in 2010. This laser-cut metal key with exceptional security “flips out of the FOB like a switch blade.” The FOB might or might not be a Proximity key, in which case you press a button to start the car, depending on the trim package of your vehicle. The E-Z Passive System is the name of the push-to-start feature (E-Z Key).

A proximity remote FOB system allows some Cadillac vehicles, including the 20082014 CTS, 20072014 SRX, 20052013 STS, and 20082009 XLR, to be started by tapping the start button on the dashboard. The transponder proximity key and remote are both operated by the same FOB, but the car won’t start unless the antenna ring recognizes the right ID Code in the transmitter. This system is available on the Chevy Corvette from 2005 to 2014.

How much do new Kia car keys cost?

To cut and program spare Kia auto keys, we exclusively utilize dealer-level software, so you can have a key manufactured while you wait. A few models can be duplicated. To do this, information from your key must be copied and transferred to a new virgin chip.

Without changing the ECU, locks, or ignition barrel, we can produce you a fresh set of keys for your Kia. Additionally, we may make sure that your misplaced keys can no longer start the car or open doors. All for a small portion of what dealers would like to charge you.

Even better, we can come to you, access your car without causing any harm (non-destructive), and produce you a new key right there on the side of the road. You’ll save money by not having to pay to have the car towed, not to mention the hassle.

Note:

Avoid purchasing used Kia keys from eBay or junkyards since they cannot be programmed into another vehicle. Each key features a transponder chip that can only be programmed once before becoming inoperable. Additionally, we won’t use any such materials that we haven’t provided.

Can a car’s VIN number be used to create a key?

Even if you managed to misplace your car key and don’t have a backup, there is always hope! You may always simply have a duplicate key created using the VIN of your automobile.

VIN stands for “vehicle identification number,” and each automobile has a special code that can be used to make a copy of your car key if you don’t already know this. You will need the ownership paperwork for your car to establish that you are the one who purchased it in order to use this service for a Mercedes key replacement, an Audi key replacement, or pretty much any other auto key replacement.

The user guide or service handbook for your car will contain the VIN code. Other locations to look for it on the driver’s side are the junction of the dashboard and windshield.

What is the cost of programming a new key fob?

The cost of a locksmith to program a key fob often varies depending on the lock’s complexity, location, and kind of key.

How much does it cost to program a key fob?

The typical person who programs key fobs is a locksmith. Typically, key fob programming costs between $85 and $400.

  • Nowadays, most cars come standard with key fobs, also referred to as remote fobs. An additional remote fob with buttons that may lock and unlock the vehicle from the outside, the trunk, or the back hatch is included with car keys. In order to make opening several doors on a car easier, key fobs were created. In inclement weather or dangerous locations, it is useful.
  • The inconvenience of having to get your key fob reprogrammed is not convenient. You’ll need the assistance of a qualified professional if your key fob is lost, broken, or the battery dies. And that costs money. You have two choices: visit the original auto manufacturer’s dealership or a car locksmith.
  • Which option is preferable?
  • Locksmith or merchant?
  • A key fob can a locksmith program it? Depending on the circumstances. A locksmith would be your best bet if you accidentally locked your keys in your automobile. A dealer would be a preferable option if you needed a new key fob for your vehicle.
  • Do you desire financial savings? You should avoid the dealership and go to a locksmith instead if you want to save money on key fob programming. In comparison to the dealership, a locksmith provides cheaper costs along with other benefits.
  • What is the cost of programming a key fob?
  • Even though using a locksmith’s services is less expensive, you can still have pricing questions. How much does programming a key fob cost from a locksmith? The cost may be between $50 and $200. The real cost is determined by a number of variables, including:
  • the key fob’s type. It could be more expensive to reprogram the key fob than a standard key fob if it comes with a transponder key or keyless ignition. Transponder keys come with electronic chips that are required for the automobile to start. If a computer chip is necessary, trying to reprogram an existing key fob from a different car could not work in your present vehicle.
  • Your car’s model and make. Some manufacturers make reprogramming a key fob more difficult. Although that increases security, having to replace or reprogram the key fob raises the cost, which is not ideal.
  • How much do locksmith services in your area typically cost? To stay in business, locksmiths must maintain competition with one another. Depending on how much key fob programming services typically cost in a given state or city, the pricing may change. Regardless of where you live, hiring a locksmith will still be less expensive than going to a nearby dealership.
  • When You Might Need to Program Your Key Fob
  • When looking for auto key replacement near me, there are a number of various circumstances that could need key fob programming. These circumstances include:
  • The key fob was lost by you. Reprogramming an old key fob to work with your current vehicle is one option to save money if you lose your key fob. Depending on the sophistication of your car and the key fob, you may occasionally be able to achieve this. Additionally, you can acquire generic key fobs that a locksmith can program to work with most vehicle makes and models.
  • The key fob is broken on it. Your key fob might need to be reprogrammed if it breaks or ceases operating for any other reason. This may also occur if your keys fall into water or if another accident occurs. Key fobs can be repaired and reprogrammed, but if the damage is too severe, they could need to be replaced.
  • Your key fob’s battery is completely dead. It might not be enough to simply replace the battery in your key fob if the battery entirely dies. A key fob that has a dead battery may lose its memory, requiring reprogramming after a new battery has been inserted.

The cost of a brand-new key fob

According to Mel Yu, automobile analyst for Consumer Reports, “the cost to replace the newest key fobs can range from $50 to as high as $400 depending on the brand. And that only applies to the fob. To have new mechanical backup keys created and replacement fobs configured to function with your automobile, add an additional $50 to $100.

Are key fobs replaced by AutoZone?

AutoZone does offer key duplication services for cars made by Toyota, Ford, Honda, Dodge, GMC, Mercedes, Kia, and other manufacturers. These services include key duplication, transponder keys, key fobs, and vehicle key blanks.

How is a key fob programmed?

Call your neighborhood locksmith; they can typically program a key fob much more affordably. An average key fob programming cost is around $60.

It can cost around $90 to program a key fob and metal ignition key that are a single unit because you need to register both the remote and the metal key (which contains the transponder chip) to the car, necessitating two steps as opposed to one.

Consult your technician. If you are a loyal customer, they might even hook you up for free if they have the equipment needed to handle key fob programming.