Contact a locksmith, but be ready to re-bend your door. To unlock your Kia Optima, locksmiths will pull the door away from the body using a wedge and a pump-up tool.
A slim jim would work if you had a general manager, but you would also have to deal with the GM’s easy steal features.
Simply take the top of the door away from the body if you wish to DIY. As I said before, locksmiths will first use a plastic wedge to pull the door out a little at the top, and then they’ll use a pump-up wedge to open it further without harming the paint. If I were you, I’d use a wood wedge to prop open the top of the door, providing you have 24s handy, then sneak inside and deactivate the power door lock using a coat hanger. If you decide to do it, open the door on the side you wedged before opening the other to prevent any damage to the latch. Given that easy access is restricted by the Kia Optima door’s top sill, you might even have better luck pressing the hatch release button.
I am a locksmith with AAA. There are three approaches you can take. As everyone has mentioned, the long rod (extension tool) can be used with the door wedge. It is much simpler to pull the handle back than the lock mechanism itself. You may also use this to open the handle if you have a tool that is designed to go inside the Kia Optima and come up through the inside of the window. The handle only needs to be opened about 1/4 of the way before it unlocks. IL man, I wish I was there. Only an L-shaped tool (L tool), which is nearly impossible to find unless you’re lucky, will function inside the actual door. If you want to try the L, the internal door mechanism is about 6 inches below the handle, near to the back of the door. Once you’ve located the Bellcrank, you must fumble with it and then turn it clockwise. The hardest route is the last one.
Ask if lockout assistance is available by calling the local police non-emergency line.
What does the lockout kit for the Kia Optima contain? Don’t even attempt it if it’s the slim-jim. If you don’t perform it correctly, you risk breaking the lock and being completely helpless.
If you have a wedge of some kind and the long metal bar (not a flat piece, that’s the slim-jim), you can drag the top of the door back and gain approximately an inch (enough room to get the bar through). Once the bar is in place, you can either attempt to push the manual lock or, if you have power locks, press the lock button. Another option is to try pulling the handle.
I’ve managed to lock my keys in the car six times this year, so I’m good at it. Going back to the dealership where you purchased the Kia Optima and asking them if they can produce you a key without the cip is a good idea. I keep the free one in my wallet because it is thin.
In This Article...
How can a car door be opened without the key outside?
When you’re locked out, Bright Side has discovered a few workarounds that can let you back in.
- Tennis ball is the first technique.
- Use your shoelace for Method #2.
- Utilize a coat hanger as method #3.
- 5th Approach: Apply a spatula.
- Use an inflatable wedge as method #6.
- Use a plastic strip as Method #7.
- Method #8: Simply dial your auto assistance company.
How do I get inside my car?
You might need to break into your car to get your keys out if you’ve locked them inside. A coat hanger or thin metal implement can be used to unlock a locked car door. It is extremely simple to lock yourself out of your automobile, and you will run into serious trouble if your key is locked inside the vehicle or is lost without a backup key nearby. Sometimes people are compelled to take drastic means to retrieve their keys that have been locked inside of their automobile; others even break a window to gain entry. When shattered, tempered glass is specially treated to shatter into thousands of pieces. In an accident, there won’t be large pieces of flying glass that way. Knowing the right technique for breaking into a car will save you the money and effort of breaking a window open and cleaning up the broken glass. Several approaches are available for you to test out because they don’t require any specialized tools or prior locksmithing experience. The option to call a professional Houston locksmith expert is typically available, but there might not be one nearby or you can have a long wait. Auto locksmiths are crucial.
Method 1: Unlock A Door From The Inside Of A Car With Manual Locks
Open the top of the automobile door just wide enough with a tool as a wedge (a strong airbag is used by professionals) so that a metal rod can be wrapped around the locking pan and pulled up to release the pin and unlock the door. It is crucial that the method utilized takes into account the unique type of lock on the car.
Step OneUse A Tool Or Wedge
To hold the door’s space, use your tool or wedge. To create a space between the car’s body and the window or door frame at the top of the door, use something thin.
Step TwoSlide Tool In The Door Gap
Enter the door gap with your tool. After that, insert your tool into the area between the car’s body and the top of the door’s side opposite the hinge (that corner is one the will put out the most). Pull open a gap with your finger to make room for the tool to pass through.
Step ThreeInsert Tool Until Visible
Insert your tool further till it is visible. As soon as you can see it through the automobile window, slowly lower and insert the tool into space.
Step FiveUse Hook To Open Lock
To unlock the lock, use the hook. To create a space large enough to fit the tool inside the car, use your wedge. Using the tool, grasp the door’s locking pin and pull up until the door unlocks.
Method 2: From The Inside, Unlock A Car Door That Has Automatic Locks
The same steps that are utilized with manual locks are employed to separate the top portion of the car door from its body. Simply make a space with a long, narrow object like a wedge. Next, use a different tool to push the “unlock button.” How easy or difficult it is to pull the door away from the car’s body and where the switch or button regulating the locks is positioned both affect how challenging it is to open an automated lock from the outside.
Step OneHow Are The Car Locks Activated?
Find out how to operate the car’s locks. The activation of automatic locks can be done in a variety of ways. Verify where the car’s unlock button is located to see if it is on the console or the driver’s side.
Step Two: Press On Car Button
To press the button, make a loop or hook tool. Some automated locks feature a simple button on the driver’s side armrest. Using a tool like a straight metal rod, one can reach this button and press it to unlock the door. You might require a tool to seek for or a hook at the end if the button is difficult to reach or if it is a switch. Trial and error is the greatest way to learn what works.
Without a key, how can I enter my car?
The usage of fancy key fobs, touchpads, and remote-unlock sensors in some more recent vehicles virtually ensures that you won’t get locked out. But what about the millions of poor souls who still manually lock and unlock their vehicles? Will they always be bothered by automobile windows that are shattered and prybars?
It is entirely possible to get your keys out of a locked car with a little patience, experience, and even more patience, and you probably won’t need to go to an auto body shop nearby to have your window fixed afterward. Here are some pointers for entering your locked automobile safely. (Bad people shouldn’t read any farther.)
When your car’s keys are locked inside, how can you unlock it?
If you’re an extremely handy individual, you could try doing it yourself. Unless you have some experience with replacing locks or with autos, we don’t advise trying this. Your vehicle’s locks may sustain long-lasting harm.
The only way to change a car’s locks is from inside the vehicle; you wouldn’t accomplish this while standing outside your locked car, staring at your keys in the ignition, or after having left your keys inside the vehicle on the side of the road or in a parking lot.
To access the bolts holding the door handle and lock assembly in place, you need replacement parts and certain tools like ratchet extenders or screw-driver type socket drives.
Bolts, screws, and clips are small and reasonably accessible, so extra-large tools are not necessary.
- Purchase a fresh lock cylinder designed especially for your car.
- Take off the screws keeping the interior door panel in place.
- The electrical wiring for the window and door locks should be unplugged.
- Door handle assembly removed
- Switch out the lock cylinder.
- Reposition the door handle assembly.
- Reattach the electrical wire clips
- Reinstall the door panel.
Knowing how to change a car lock is useful knowledge whether you are a do-it-yourselfer or just want to ensure the locksmith does a superb job.
Can Locksmiths Make Keys for Cars?
If your keys are locked in your automobile, one solution is to have a locksmith create a new key specifically for your vehicle. Giving the locksmith the VIN, or vehicle identification number, is one of the finest ways to achieve this. The locksmith will be able to create a new key that will fit the lock using the VIN.
You might need to provide ownership documentation to obtain a new key. The following is a summary of some of the details you might need to give a locksmith in order to have a new key made:
- VIN
- Keycode found inside the front door panel or in the owner’s manual
- Title
- Registration for the vehicle using your name and VIN
- Identity card for insurance bearing your name and VIN
Getting a new key created may seem like a lot of trouble, but it is all done to keep automobile owners safe from criminals. You wouldn’t want a burglar to have the ability to make a key for your automobile by calling a locksmith, would you?
How do you use a screwdriver to unlock a locked car?
- Carefully place the screwdriver between the door and the frame. This could result in your door bending or your lock breaking if you apply too much force.
- Put a wire coat hanger or another tool with a similar form inside your automobile and use it to push the unlock button once you can see the screwdriver’s tip inside.
- To protect your door and the locking system of your car, take out the screwdriver before opening the door.
Call a locksmith if you are unable to access the locking mechanism or are concerned about damaging your door.
Try Jerry if you’re concerned that this will happen again. For as little as $4.16 a month, Jerrys roadside assistance memberships give you access to industry-leading roadside help that includes services like towing, lockout assistance, and a mechanics hotline.