Modern models are lighter than ever while also having greater power because to improvements in vehicle construction quality. Even with all the features that make today’s cars fantastic, there is still one thing that doesn’t change: soil. Because friction is a key driving factor, it’s crucial to keep your motor’s components properly lubricated so that you can operate as you should.
Our Boucher VW staff has the answer to your question below; have a look at it to see where you should stand if you’re asking, “What is the recommended oil type for the 2019 Volkswagen Jetta?
In This Article...
Volkswagen Jetta oil viscosity recommendation
The 2019 Jetta is an amazing feat of engineering with a turbocharged engine that is designed to perform in every circumstance. We advise using oil with a grade of 5W-30 to keep it operating at its peak efficiency. This viscosity can keep your engine running smoothly in the majority of temps Wisconsin can dish out, keep your engine and parts clean, and even aid in improved fuel efficiency.
How often should you replace the oil in your Volkswagen Jetta?
The outdated 3,000-mile limit is no longer relevant due to the use of synthetic oils. Naturally, it’s not a bad idea to replace your oil at shorter intervals than at longer ones, but in a pinch, you can drive your car for anywhere between 5,000 and 7,000 miles without changing it. Of course, this changes based on usage and the weather, but unless you go overboard, you should be fine!
Is 0W 20 oil used in the 2019 Jetta?
Volkswagen Jetta 1.4T Gasoline Models for 2019, 2020, and 2021 Use VW 508 00 Oil Spec. All SAE 0W-20 viscosity VW 508 00 oils are OEM-accepted.
Which type of oil need to I use in my Volkswagen Jetta?
To keep the engine properly lubricated and operating at peak efficiency, your VW Jetta needs a very specific kind of oil. You should check for 5W30 motor oil when buying replacement oil. Compared to regular oil, this synthetic oil is made to tolerate engine heat better.
Can I use 5W-30 with 0W-20?
No, you shouldn’t use a thinner SAE grade or a thicker oil for a suggested thinner oil vis-grade if your owner’s handbook calls for a thicker oil. The performance of your car’s engine will be protected and maintained if you use the right viscosity motor oil. Thus, while your vehicle is still covered by its manufacturer’s guarantee, always follow their advice.
**If your vehicle calls for 0W-20, avoid using 5W-30 in the rear. The vis-grade number and grade must match.
0W-20 oil: is it synthetic?
High quality base oils and potent additives are required to manufacture a 0W-20. At very low temperatures, the basic oils must still be able to protect and flow. For the oil to flow smoothly at these low temperatures, a lot of synthetic oil is typically required. 0W-20 motor oils are either fully synthetic or partially synthetic (synthetic blend) and need synthetic base oils; they are not conventional (or mineral) motor oils. And the additives must be light enough to move easily while still guarding these more modern, sophisticated motors.
GLOBAL PARTNERS
Since 1999, Volkswagen has been a global strategic partner of ours. We are unified in our creative working alliance by a persistent desire to advance technology and reimagine industry standards.
COMBINED EXPERTISE
We combine our strengths to create engine oil that is co-engineered, maximizes performance, and offers the ideal balance of performance and dependability, resulting in a drive that gets more and more thrilling.
This collaboration not only creates the best performance oils, but also improves fuel efficiency and lowers CO2 emissions. These are just a few of the explanations for why Castrol is always the recommended motor oil for Volkswagen engines.
After years of fruitful collaboration, millions of Volkswagen vehicles now have the Castrol name on their filling cap.
THE POPULAR CHOICE
Volkswagen requires the highest standards, as one could anticipate. Castrol EDGE has thus gone above and beyond the call of duty in terms of approvals and specifications, and we continue to push the limits of performance in order to be their sole recommendation for engine oil.
Does Volkswagen require certain oil?
Volkswagen advises drivers to use engine-appropriate certified oil that specifically conforms with the VW oil quality standard. This condition is met by synthetic oils, but not all synthetic oils. Make sure the one you’re using specifically corresponds with the specifications mentioned for the engine in your car.
What is engine oil 0W 20?
In colder temperatures, 0W-20 motor oil flows as freely as 0 Weight oil, but once the engine reaches operating temperature, it behaves more like 20 Weight oil. This guarantees that oil will begin to flow through the engine right away, lubricating important engine components even in cold weather.
The ‘W’ in viscosity descriptions does not, contrary to popular belief, stand for weight. In actuality, it represents Winter. This means that synthetic 0W-20 oil performs as a 0 Weight oil in cold areas but becomes as thick and viscous as a 20 Weight oil once the typical engine temperature has been attained.
Castrol EDGE, a cutting-edge full synthetic 0W-20 motor oil, is part of the company’s line of low viscosity 0W-20 lubricants. It is our toughest oil and is made to endure high temperatures and pressure. For those who want to push their car to the limit, it’s the perfect choice. Full synthetic 0W-20 motor oil liquid Castrol GTX MAGNATEC is designed with protective, clever ingredients that offer outstanding wear prevention.
How often should the oil be changed in a 2019 Jetta?
One of the most important and fundamental maintenance for your car is an oil change. The 2019 VW Jetta’s oil and filter should be changed every 3,000 to 5,000 miles, but it’s important to consult your owner’s handbook and your dealer to determine the intervals that are most effective for your car.
5W-30 oil is it synthetic?
The #1 High Mileage brand, Castrol GTX High MileageTM 5W-30, is a premium synthetic motor oil designed especially for cars and trucks with more than 75,000 miles on them.
How frequently should a Volkswagen Jetta have its oil changed?
The suggested interval for getting an oil change is once per year or once every 10,000 miles, whichever comes first, according to the official Volkswagen website. The manufacturer publicly admits that the VW Routan, which needs an oil change every 6,000 miles, is the exception to this rule. The ordinary Routan driver might need to get their oil changed twice a year.
What is oil 5W-30?
A popular motor oil for light-duty gasoline and diesel engines is 5w30. 5w30 is a multi-grade oil, like the majority of modern motor oils, ranging from a lower viscosity grade of 5 to a higher viscosity grade of 30.
The “W” stands for “winter; the number before it denotes the thickness or viscosity of the oil at low temperatures (thus the “W”); the number following it denotes the thickness or viscosity of the oil at higher temperatures, when the engine is operating.
Can I substitute 5W-20 for 0W-20?
One of the low-temperature grades added to the SAE J300 EOVC system after 1952 is 0W20 motor oil (0W20 oil). It is a liquid designed to behave as an SAE 20 once the engine reaches its operating temperature but flow as easily as an SAE 0 in subzero conditions.
Even at -35C/-31F, this type of oil will still start to flow through the engine’s oil channels. This oil lubricates important engine components, making it simpler for you to start your engine cold in the winter.
W20 vs 5W20 Fuel Economy
Another low-temperature grade often advised for winter use is 5W20 motor oil, with 10W-30 serving as an option for higher temperatures. Because it offers the best fuel economy, reduces fuel consumption, and produces fewer exhaust pollutants, this oil type is widely used. Motor companies and governments all around the world, led by those in Japan, Europe, and the US, are looking for 5W20.
Low viscosity, high-quality synthetic grades 0W20 and 5W20 can both significantly improve fuel economy. When employed in fair-weather temperatures, their attributes are identical. When utilized in cold temperatures, there is little to no difference between the two variants.
Which is preferable, 5W-30 or 0W-20?
Pay particular attention to the quality testing done while selecting a motor oil. Both the API donut and the starburst sign should be visible on the packaging.
The American Petroleum Institute’s testing was successful, as evidenced by the API donut. The starburst is also used to demonstrate eligibility for SL service.
Location
You must take the region into account while selecting the ideal oil viscosity from the suggested possibilities. For instance, 5W20 can be used in somewhat warmer settings while OW20 will perform better in cold climates like Maine or Alaska.
Having knowledge of the temperature range aids in selecting the proper oil. The temperature range for 0W-20 oil is -40 to 68F. In contrast, the operating temperature range for 5W20 oil is -31F to 68F and for 5W30 oil is -31F to 104F.
Fuel Economy
Because the lubricant flows more easily, the higher the fuel efficiency, the thinner the oil viscosity. As a result, 5W20 will run similarly to 0W20 once the engine has warmed up, but 0W20 will be more fuel-efficient during startup.
In both colder and warmer climates, 0W20 offers greater fuel efficiency than 5W30. However, 5W20 only performs better than 5W30 in hotter environments.
You can give the engine the protection it needs to last longer by using the proper oil in it. Make sure you do your study before selecting oil to attain the performance level you need.
Which is better, 0W-20 or 5W-20?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
Does 0W-20 cause engine damage?
an inquiry from a reader “I’ve never owned a vehicle that used anything other than 5W-30, so this is a big change. The engine oil recommendation for my new pickup truck is 0W-20, and I’m very skeptical about it. I asked my dealer if I could at least use 5W-20, but they insist that 0W-20 must be used to maintain my warranty. Is 0W-20 safe for my new engine?
Manufacturers have been specifying 5W-20 and 0W-20 since the beginning of the last decade, and there is no evidence that engine wear rates have increased at all. Engine designs and materials, as well as motor oil chemistry, have made enormous strides in the last 15 years, so engine wear has never been lower. By the end of this decade, a majority of new cars will use 5W-20 and 0W-20.
Simply to improve fuel efficiency, automobile manufacturers are recommending thinner motor oils, but given how long this trend has been going on, we can say there is no drawback in terms of shortened engine life.
Let’s use the specifications of the AMSOIL Signature Series 0W-20 and 5W-20 to illustrate our position regarding the second half of your query regarding substituting 5W-20 for the recommended 0W-20.
The measured in is the industry standard for assessing viscosity at operational temperature “at 100C, centistokes.
- 8.8 centistokes for the AMSOIL Signature Series 0W-20.
- 8.7 centistokes for AMSOIL Signature Series 5W-20.
The 0W-20 and 5W-20 are consequently nearly equal in terms of thickness or viscosity at working temperatures. Because it would provide a very minor increase in terms of cold weather start-up protection, the car maker chose a 0W-20 oil.
We choose a 0W-20 for year-round use even though our daily driver requires a 5W-20 in order to have the optimum start-up protection. Even in sweltering weather, we observe absolutely no oil usage in between oil changes.
In conclusion, you may be sure that a high-quality 0W-20 motor oil will provide the best wear control. Enjoy your new truck, and you may use 0W-20 motor oil with confidence.