Traffic Program is referred to as TP. Stations that broadcast traffic announcements are identified by this.
In This Article...
What does a VW with no TP mean?
Where the BT, wireless strength, and other icons are located at the top of the media player, I receive a “NO TP” message. If the media source, such as a USB stick, is stopped or paused, it disappears.
What does my car’s TP button mean?
Revised on 7/23/2018. This capability enables the transmission of traffic information within the RDS network of a given radio station. The function is active according to the TP symbol.
How do I deactivate TP on my automobile radio?
I’m aware that the radio’s on/off button may be used to turn off TP by holding it down for two seconds, pressing 4, and then releasing it.
Why does the radio in my car randomly change stations?
There are a number possible causes, but some of the more frequent ones include a loose cable, a bad connection, or an outdated car stereo. If you’ve tried all the suggestions in this article and the issue still exists, your radio probably needs to be replaced.
What do the radio symbols AF and TA mean?
Alternative Frequencies (AF) continuously retune the station to the network’s strongest signal, and Traffic Announcement (TA), if it is picked up, offers the most recent traffic updates or traffic programs (TP).
Press the control dial after rotating it to [SET AF-ON], [SET TA-ON], [SET AF/TA-ON], or [SET AF/TA-OFF].
To preset RDS stations with the AF and TA setting
Along with an AF/TA option, RDS stations can be programmed. After setting AF/TA, either manually or with BTM, preset the station. You can manually preset stations that aren’t RDS.
To stay with one regional program (REGIONAL)
You won’t be moved to another regional station with a stronger frequency when the AF and REGIONAL functions are on. Set [SET REGIONAL] in [GENERAL] to [SET REG-OFF] while FM reception if you depart this regional programs reception area. (In the UK and some other places, this function is inoperable.)
Local Link function (UK only)
Even if they are not pre-set on your number buttons, you can choose from other nearby stations using this capability. Press a number button (1 to 6) that has a preset local station while receiving FM. Press the local station’s number button once more in 5 seconds. Continue doing this until the local station is picked up.
On JVC radios, what does TP stand for?
- The “TP indicator is on” message appears when the TP button in FM mode is briefly pressed.
Note:
The TP light flashes when the station being received is not a TP station. Click the
the display, and the search for TP stations begins. “TP is illuminated” when a TP station is tuned in.
- If you wish to pause a TAPE (or CD, KS-FX730R/FX630R only) while you’re playing it, press the
Press the TP button to activate the TA standby mode and listen to a TA broadcast. (The “The TP indication turns on.)
In the event that a TA program begins to transmit while the TA standby mode is in effect, “The FM mode is activated, and TRAFFIC is displayed. The TA program can be heard when the volume is turned up to the predetermined “TA VOL” level (see page 14).
In the FM mode, temporarily pressing the PTY button causes
When a PTY station is received, the “PTY indication lights up and the PTY standby mode is activated. For five seconds, the PTY name that is stored on page 9 (for instance, “CLASSICS”) flashes.
The “PTY” sign lights if the station being received is not a PTY station. Click the
shows in the display, and the hunt for PTY stations begins. PTY is lighted when a PTY station is tuned in.
- If you wish to pause a TAPE (or CD, KS-FX730R/FX630R only) while it is playing, press the
Press the PTY button to activate the PTY standby mode and listen to a chosen PTY program. (“PTY” indication flashes.)
The chosen PTY name is shown and the FM mode is activated if the PTY begins transmitting while the PTY standby mode is in effect. Then, the selected PTY is audible.
How do I end TA interruptions?
Hold the tune/scroll/ok knob and the power/volume knob simultaneously until the screen turns dark to reset your radio (about 10 sec).
The TA interrupt continued occurring around every five seconds when I was driving a rogue that I had the sad experience of renting. There were no settings I could change, so my only options were to reset it or take it to a dealer. It’s quite annoying, but I believe the reset will stop itit worked for me.
TA seek: What does that mean?
SEEK, (SCAN), and AUTO-MEMORY function in FM mode can only receive and save RDS program while AF is on. 3) TA SEEK/TA ALARM: In TA SEEK mode, the radio retunes to the next station, which has a different PI from the last station but the TP information, if the newly tuned station does not get it after 5 seconds.
How do you deactivate the radio on a Volkswagen Polo?
Try pressing and holding down the on/off button for a number of minutes. When all else failed to turn off the radio on a Fiat I rented years ago, that method did the trick. Try pressing and holding down the on/off button for a number of minutes.
My VW radio code is where?
The safe code for your Volkswagen radio may be located in one of several locations. It’s in the radio manual that comes with your Volkswagen’s original documentation. If you don’t have this paper, you might be able to locate the code on the spare tire or in the trunk.
Why does my radio continually going to the AUX setting?
The port automatically changes to the aux setting when a cable is plugged in. When you drive or go over bumps, a wire that is already plugged in and dangling there may be activating the port.
How effective are traffic announcements?
A traffic announcement (TA) is a particular kind of traffic report that is broadcast on the Radio Data System. Typically, it is used by drivers to aid in route planning and to reduce traffic congestion.
This TA flag can be configured to cause the RDS-enabled receiver to pay extra attention and, among other things, pause the CD, stop the cassette, or retune to get a traffic bulletin. While the TA flag is used to pause the tape or turn up the volume during a traffic bulletin, the associated TP (Traffic Programme) flag allows the user to locate just those stations that frequently broadcast traffic bulletins.
On some contemporary devices, traffic reports can also be recorded and saved internally, both while the device is turned on and for a defined amount of time after the device is turned off. It might also feature built-in timers to find and record the same for two different daily occasions, one setting for before the commute in the morning and the other for the return trip in the evening. The driver can subsequently recall these messages if necessary. TIM, or traffic information message, is the name of this particular function.
How can the radio be turned off in a BMW?
Yes! The master radio button, which occasionally doubles as the volume control knob, can be used to switch off the radio in your BMW 5 Series. This won’t completely turn off your radio; it will merely mute it. You won’t hear anything, but you will still be able to see the station displayed.
Choose another audio source, such as a CD or your phone, if you want to totally switch off your radio. This won’t disable your audio system, but it will disable the radio so you can connect to an other sound source.
Since you’ve only got your car for a few weeks, use the Jerry app to make sure it has the finest car insurance protection. After you download Jerry, simply respond to a few questions that should take you no longer than 45 seconds to finish, and you’ll receive car insurance rates for coverage that is comparable to your current plan right away. Customers of Jerry save $879 year on average.