For your 2015 Jetta Hybrid’s clock to receive an update:
- On the ignition.
- Activate the clock/menu button. The hour display on the clock will blink for around 4 seconds.
- flickering and moving the hour past the 0.0/SET.
- Activate the clock/menu button. For around 4 seconds, the clock (minutes) display will flicker.
In This Article...
How do you turn a Volkswagen Jetta’s dash lights back on?
4: A notice requesting your permission to restart the oil change service should display. By releasing the 0.0 button and pressing it once more, you can confirm that you have.
5: After the “Service Was Reset” message appears, wait for it to go away before turning off the ignition.
The process for turning off the service light is identical on a number of contemporary Volkswagen models. The VW Passat, Jetta, Tiguan, and other models should all function using the procedures below.
2: Start the ignition while holding down the 0.0 button on the instrument cluster.
3: To access the reset feature, let go of the 0.0 button and press the hour and minute button.
4: After a brief delay during which the display returns to its initial state, turn off the ignition.
5: The service light ought to be off after waiting at least ten seconds before starting the engine again.
How is the clock changed in a 2016 Jetta?
- At the left-bottom corner of the instrument cluster, press the Menu/Clock button. This will make the hour stand out.
- On the instrument cluster’s bottom right, press the 0.0/Set button. If you need to put the time back, press once to advance it by an hour, or hold to advance it quickly.
- Once more pressing Menu/Clock will highlight minutes. The 0.0/Set buttons are once again used to alter this time.
- For the process to be finished, press the Menu/Clock button.
The quickest and easiest way to change the time is using the steering wheel controls. To do this, pick the “Settings menu, then scroll down to time. In addition to changing the hour and minute values, you can also activate the daylight saving time and 24 hour clock modes here.
Setting the clock in the infotainment system
The specific procedure may vary slightly based on the model year as models evolve over time. You might want to go into the infotainment system and alter the radio display even though many vehicles will change it automatically. For the Volkswagen Golf, do this by hitting the Menu button, choosing Setup from the touchscreen, and then selecting the Time and Date settings. The video shows the entire procedure.
On a VW Polo, how do you change the time?
Start the engine. The two buttons at the bottom of the instrument panel will be used.
For each hour needed, press the right hand button (labeled as 0.0/SET) within 5 seconds. The format of the clock is 24 hours.
To advance the minutes, press the button on the right hand side. One press per minute once more.
To finalize the setting, push the left hand button one last time. The number of days (490 in this example) and miles (9800 in this example) until the next service are displayed on the display. To return to normal or exit, press the left button once again. The display will disappear after 10 seconds.
Only advice should be based on the How to material on this website. If you are not properly trained or do not have the necessary tools or equipment to carry out a repair safely, do not try the repair.