4: A notice requesting your permission to restart the oil change service should display. By releasing the 0.0 button and pressing it once more, you can confirm that you have.
5: After the “Service Was Reset” message appears, wait for it to go away before turning off the ignition.
The process for turning off the service light is identical on a number of contemporary Volkswagen models. The VW Passat, Jetta, Tiguan, and other models should all function using the procedures below.
2: Start the ignition while holding down the 0.0 button on the instrument cluster.
3: To access the reset feature, let go of the 0.0 button and press the hour and minute button.
4: After a brief delay during which the display returns to its initial state, turn off the ignition.
5: The service light ought to be off after waiting at least ten seconds before starting the engine again.
In This Article...
How can you turn a Volkswagen’s check engine light back on?
Your Check Engine Light Can Be Reset
How can you turn a Volkswagen’s EPC light back on?
We encourage you to visit a nearby Volkswagen repair shop to resolve the EPC light issue on a VW. They will be able to identify the issue in the repair shop.
Your engine sensor should be changed or reset as the first option for you to try in order to see if the EPC light is turned off.
Try the following if you wish to resolve the EPC light on your own: first, start the vehicle normally. Once the engine has started running a second time, depress the gas pedal all the way. This works in some situations.
Additionally, it is a good idea to examine the throttle body’s electrical connections. After you clean the connector, the Volkswagen EPC light might go out.
Can I manually reset the check engine light?
You might have requested for assistance with a computer problem if you’ve ever worked in an office setting with an IT department.
Probably the first thing your IT wizard asked was, “Have you tried resetting your computer?”
The analogous repair for a car’s check engine light is the on-off technique. It compels the computer to reboot and restore its previously saved state.
Simply switch the ignition on for 1-2 seconds, then off for 1-2 seconds, using your key. Three or four times through, repeat this step.
If the check engine light is still on after the reset, your car might still be having issues. Think about using the OBD2 scanner to check for the error code or taking your car to a qualified repair.
How can I reset my Volkswagen now that the battery has been changed?
To start with, you should determine whether the immobilizer is the issue. To do this, start your Volkswagen’s batteries and check to see whether your dash’s immobilizer warning lightmost likely in your speedometeris flashing. It ought to resemble the silhouette of an automobile with a key inside.
If it is flashing, the immobilizer is no longer attached to the system. You must do a cold reboot in this situation, which may be done by following these steps:
- Severing the two battery cables
- Tap the two cables collectively.
- Disconnect the cords for fifteen minutes.
- Reattach the battery’s cords.
You can also attempt the following alternate technique to get your key to self-reprogram if the previous one doesn’t work:
- Make sure a charger is being used to charge the battery.
- Keep the battery charged and the engine off while leaving the key in the ignition for one hour.
Bring your automobile to the closest Volkswagen dealership if nothing else works, and have the immobilizer resynchronized with your vehicle there.
What do the caution lights on a VW mean?
Yellow indicator lights are an indication that there may be a problem, and the color is trying to warn you to drive carefully. Make sure to get your car checked up by a Volkswagen service professional as soon as you notice a yellow warning light.
1. ABS
Possible problem with the anti-lock braking system. There is an ABS issue if the brake system light comes on.
AdBlue Level 2.
Low AdBlue level; top off immediately
3. AdBlue System Issues
Possible AdBlue system problem.
5. Bag Air
Airbags have been deactivated or the airbag system is malfunctioning.
7. Defects in Automatic Transmission
possible issue with the automatic transmission
8. Broken brake light bulb
There are one or more burned-out brake lights.
9. Brake Pad Wear IndicatorBrake pads may need to be replaced because they are low on wear or excessively worn.
10. Bulbs that fail
Solid light: a burned-out bulb; blinking light: perhaps a problem with the headlight system.
12. Pre-Glow of a Diesel Engine
Solid light indicates that the diesel engine pre-glow is on; blinking light indicates a potential problem with the diesel engine.
16. Check Engine / Engine Problem
Possible engine problem.
Potential engine problem with the electric power control system.
18. Blinking light: system triggering event; ESP/ASRSolid light: Electronic Stabilization Program or Traction Control are deactivated.
Particulate Filter 19.
See the owner’s manual if the diesel engine filter is blocked by something.
Gasoline CapThe fuel cap is missing; it should be replaced.
Immobilizer 23
engine starting using the wrong key.
24. One or more of the license plate’s bulbs are burned out.
Low Fuel LevelRefuel as soon as possible.
Oil Pressure 26.
No oil pressure exists. Since it is technically a red light, you should immediately come to a complete stop in a secure location and turn off the engine.
Low Oil Level 27
Oil level is low, check oil ASAP. Oil sensor issues could exist even if the oil level is not low.
29. Failure of the Rain Sensor
Possible rain sensor problem. Start the engine, then restart it. If the light is still on, bring it in for repair.
System for Steering
Stop the car because of a steering system issue. Solid signal: less power steering assistance. blinking light: issue with the steering system.
Tire pressure monitoring at 32.
Low tire pressure. Possibly a system issue as well.
33. Low Washer Fluid
Refill washer fluid as soon as possible.
What triggers the VW EPC light?
In Volkswagen cars like the Atlas and Jetta, the electronic power control light is connected to the throttle system. The EPC light may come on if your Volkswagen has issues with the throttle system to let you know so you may obtain the repair and care it needs.
Can I operate a Volkswagen when the EPC light is on?
Most of the time, driving is safe for a brief period of time after the EPC light illuminates. But because the issue could be serious, it is essential to send your car to the nearest VW service facility, like Lithia Volkswagen of Des Moines.
Why does the EPC light come on?
When your car loses electricity, an EPC light will normally come on. Your Audi’s computer may lower power output to ease the strain on the engine if it notices a fault with any of the throttle system’s parts.
The 2015 Volkswagen Jetta’s Inspect light has to be reset.
1. Turn on the emergency flashers to reset the inspection reminder. Push the Engine Start button after continuing to hold down the Reset/0.0 button on the instrument cluster (without starting engine – foot off brake).
2. Don’t turn on the emergency flashers during the oil change reminder reset. Push the Engine Start button after continuing to hold down the Reset/0.0 button on the instrument cluster (without starting engine – foot off brake).
Using Key Start
start with the vehicle off:
1. Turn on the emergency flashers to reset the inspection reminder. Then, without starting the car, turn the key to “ON” while pressing and holding the Reset/0.0 Button on the instrument cluster. Check the dash for more details.
2. Don’t turn on the emergency flashers during the oil change reminder reset. Then, without starting the car, turn the key to “ON” while pressing and holding the Reset/0.0 Button on the instrument cluster. Check the dash for more details.
How can my dashboard lights be fixed?
Your car may have blown a fuse if the dashboard is completely dark. The lights should start operating again after removing the old fuse and replacing it. The replacement fuse might fix the issue, but it could also be a sign of a more serious electrical issue.
What causes the dash to have several warning lights?
On the dashboard of the car, the check engine light
Dashboard warning lights are the icons that flash on the dashboard to indicate when the car is having a problem. Although they are intended to glow to indicate a problem with a particular system, there may occasionally be an issue with the warning lights themselves.
Each dash symbol has a specific meaning, therefore it’s crucial to get it checked when it illuminates so you can either fix the issue or ensure the car is secure.
Several lights should turn on when the engine first starts, but they should go out shortly after. When lights remain on after the initial few seconds, they are alerting you that there is a problem with the vehicle.
A dashboard warning light typically does not indicate that the car will break down right away or that it is unsafe to drive nearby, as to a body shop. It’s not advisable to travel long distances when the warning lights are on. The likelihood that the problem may deteriorate and worsen as time goes on increases.
You might be able to determine what your car needs by looking at the warning light. For instance, if your engine’s oil pressure warning light comes on, look up the date of your most recent oil change in your records. Check the oil level under the hood. It could be time to top off or change the oil.
Has the brake system light come on? Check to see if you left the parking brake on first. If this isn’t the case, it’s important to have the brakes checked properly because a car without brakes can be quite dangerous to both passengers inside and outside.
The presence of many dash warning lights could simply indicate that you are experiencing issues with multiple systems.
If several systems were impacted by the collision, there may be several lights on after the incident. If the airbags were deployed during the collision, they must be reset in order for the dash light to not indicate an airbag system malfunction.
However, if all of your lights turn on at once, it can be a sign that your alternator isn’t working properly.
Although the aim of warning lights is to alert you to a potential issue, it is not always obvious what the issue is at first. It is essential to have the car analyzed by a trained collision repair professional.
The sooner you take care of it, the less probable it is that there will be significant harm.