The automatic speed control technology known as cruise control allows you to maintain the same
driving velocity It can be turned on at speeds of up to 40 km/h (25 mph).
CAUTION:
Deactivate the cruise control if you don’t want to maintain a steady speed while driving.
work to ensure safety.
When the road conditions prevent you from staying in one place, do not utilize the cruise control.
the same speed, such as in congested areas or on twisting, icy, or snowy roads,
damp, slick, or going downhill very quickly.
If you engage cruise control while shifting into neutral without engaging the clutch
Initially, the engine will run excessively quickly and could sustain damage.
NOTE:
used to raise the target speed and to end constant-speed driving
to reset the speed to its initial value.
Press each cruise control switch appropriately when using the cruise control.
switch.
If two or more of the cruise controls are turned off automatically, the
Several control switches are simultaneously depressed.
When the cruise control ON OFF switch (A) is depressed, this indicator will turn on.
to activate the cruise control feature.
Press the ON/OFF switch very lightly (A).
If the ignition switch is in the OFF position and the cruise control is activated,
Automatically, cruise control will activate, and the CRUISE control indicator
the following time you start the engine, illuminate.
The cruise control memory data will not function if the battery voltage is insufficient.
shall be deleted. Therefore, it’s possible that the CRUISE control indication won’t turn on while
you turn the engine back on. In this case, you must again press the ON/OFF switch to
press the cruise control button.
2. While traveling at the chosen speed, press the COAST SET switch (B).
The speed that was set as the cruising speed when you released the COAST SET switch
speed.
Switch ACC RES The speed can be increased by holding down the ACC RES switch (C).
will progressively rise. Release the switch once you’ve reached your preferred pace.
You’ve now chosen your cruising speed.
Press the ACC RES switch (C) for less to gradually increase the speed.
than one second and then let it go. Pressing the ACC RES switch (C) causes the
There will be an increase in speed of about 1.6 km/h (1 mph).
Once you’ve reached the required speed, press the COAST button.
SET switch (B) and briefly release the switch to change the desired cruising speed.
speed.
SET COAST switch While traveling at high speeds, hold down the COAST SET switch (B).
You will progressively slow down (coast) to the selected pace.
Release the COAST SET switch once you’ve reached the desired speed. Your preferred speed
has been set.
Press the COAST SET switch (B) to gradually reduce the speed
Release it after less than one second. When you flip the COAST SET switch (B),
There will be a 1.6 km/h speed reduction (1 mph).
Push the COAST button after using the brake pedal to turn off the cruise control.
SET switch (B) and briefly release the switch to change the desired cruising speed.
speed.
In the usual manner, depress the gas pedal. Upon depressing the pedal,
Your speed will increase once more.
To reduce speed, apply the brakes. Returning to the predetermined speed,
ACC RES must be pressed. See To restore the specified speed.
You can disable the cruise control by doing the following:
Any of the following methods can be used to automatically turn off the cruise control:
the moment that the active stability control (ASC) kicks in (if so equipped).
use Active Stability Control as an example (ASC).
You can restore the previously set speed by pressing the ACC RES pedal if the cruise control deactivates due to the circumstance mentioned in “To deactivate.”
switch (C) while traveling at a rate of at least 40 km/h (25 mph).
However, utilizing the switch does not function in either of the following scenarios:
allow you to go back to the speed you set.
In these cases, repeat the speed-setting process as follows:
In This Article...
How does a Mitsubishi Outlander 2021 set the cruise control?
Push the cruise control off by depressing the brake pedal, then “Set the COAST SET switch (B) to the new desired cruising speed by briefly releasing the switch. You can disable the cruise control by doing the following: Click the “Switch (A) for ON/OFF (cruise control function will be deactivated).
How does a Mitsubishi Lancer’s cruise control turn off?
You can disable the set speed driving by doing the following:
Click the “OFF/ON switch (A). (The cruise control will be disabled.) Click the “Turn off switch (D). To stop, apply the brakes.
What is a system of adaptive cruise control?
An active safety technology called adaptive cruise control (ACC) automatically regulates a vehicle’s acceleration and braking. It is started by pressing a button on the steering wheel, and it is stopped by the driver braking or by pressing another button.
How does a Mitsubishi Outlander 2020 disable Eco mode?
Tap Apps, Settings, and then Battery from your home. Click on Eco Mode. To enable or disable the Eco Mode, tap an option.
How is cruise control troubleshooted?
If all of the aforementioned checks come up positive, see if the brake switch needs to be adjusted. On a test drive, you may quickly determine this by attempting to hold the brake pedal up with the top of your left foot while turning on the cruise control. The brake switch will probably need to be modified if the cruise control tries to set. The brake switch is frequently adjusted. A clutch switch that can disable Cruise Control is available if your Corvette has a manual transmission. Similar to how the brake switch is tested, this switch can also be tested. Simply fully depress the brake pedal to alter the brake pedal switch. Make that the brake pedal switch is inserted all the way into its bracket. As you place it in its bracket, you will hear a click. Pull the brake pedal back until it stops after fully inserting the switch; you will hear the switch click into place. Reattach the vacuum hose and electrical connector for the brake switch (if equipped). Before you take a test drive, have someone check to be sure your brake lamps are working properly.
Is it acceptable to always utilize the cruise control?
Myth: Regardless of the weather, you can always utilize the cruise control. Fact: When using cruise control on slick roads or in inclement weather, such as rain, snow, hail, sleet, or ice, the system may not be able to maintain a consistent pace.
When is cruise control never a good idea?
Inappropriate Use of Cruise Control
- when the weather is slick or damp outside. Never use cruise control on slick surfaces, even if your car has functions like ACC or traction control.
- when you are sleepy
- when you’re operating a vehicle in a city or town.
- when there is a lot of traffic.
- when you come upon curvy roadways.
How can I tell if the cruise control on my car is on?
The cruise control system’s buttons are often found on the steering wheel in cars. To prevent an accident, identify these buttons by consulting your owner’s manual when the automobile is not in use.