You must first find the clasp for locking and unlocking the airbags. It usually appears close to or even inside the glove box on the driver’s side of the door, or else at knee level to the left of the steering wheel. Thanks to the registrations “Airbag” or “Passenger airbag” and “We” et “Off,” you will be able to recognize it pretty simply.
In This Article...
How do you deactivate the passenger airbag?
If the vehicle has a switch called the Passenger Airbag Cut Off Switch, it can be used to deactivate the passenger airbag (PACOS). When the passenger door is open, you may access the switch for the passenger airbag on the passenger side of the instrument panel. Verify that the switch is set to the appropriate position.
Can the front passenger airbag be turned off?
However, if the vehicle has a Passenger Airbag Cut Off Switch, the passenger airbag can be turned off (PACOS). To avoid any potential faults, you typically need to turn off the ignition before disabling the airbag. Typically, the PACOS is found on the passenger side of the dashboard.
How does a Mitsubishi ASX’s passenger airbag deactivate?
To gain access to the glove box, for instance, we must perform this operation before installing the child seat. Then, you must perform the manipulation with the Mitsubishi Asx’s engine off and the key not in the ignition.
Insert the airbag in the Off position:
It ought to be in the “We” position by default and be active. Then it might take the shape of a lock, which you’ll need to disable by inserting your Mitsubishi Asx key and turning it up a notch. You only need to place it in the “Off position” if it has a button-like form underneath.
How do I know if the airbag is deactivated on my Mitsubishi Asx?
You can start your car’s engine after you understand that it has been deactivated. In general, the airbag deactivated warning light or even a message telling you of the change should be visible if the procedure was successful.
Don’t be hesitant to install the rear-facing car seat on the passenger seat of your Mitsubishi Asx once this is finished. Be warned that facing the road will be especially risky because the baby’s bone structure is still very delicate and won’t be able to withstand the shock of impact. Your child is more safeguarded when they are turned around.
For the protection of your infant, it will be crucial that this equipment is no longer in operation, thus if you are having problems doing this type of manipulation, you should visit a technician to have it deactivated.
Put the active airbag back on Mitsubishi Asx:
In order to provide greater passenger safety, it will be crucial to reactivate the airbag when you remove the child seat from the passenger seat.
Perform the reverse manipulation while driving an automobile with the ignition turned off. That is, turn on your Mitsubishi Asx first, then toggle the airbag switch to “On.” You should notice a message on the instrument panel or the warning light turn on to confirm that it will be revived.
If you experience issues with the airbag warning light, such as if it remains illuminated all the time, you can read the article below for more details: Airbag warning light for the Mitsubishi Asx.
If there is a child in the front seat, do you switch off the airbag?
Children under the age of 12 “are the most at danger when the frontal airbag deploys in a crash,” claims Child Seat Safety in a Facebook post. The article also emphasizes that it is legally required to deactivate the airbag before installing a rear-facing kid seat in the front passenger seat.
Should the passenger airbag be off?
The Passenger Air Bag Off Light in the dash will illuminate if the passenger sensing system determines that no one is occupying the passenger front seat or if a number of other circumstances apply. It’s critical that you understand what this means:
- Front passenger airbag is not deployed.
- You can also not have the passenger air bag deployed.
- In the event of a collision, the air bag will not deploy.
When an adult-sized passenger is seated in the front seat and the Passenger Air Bag Off Light is illuminated, this typically indicates that the person is not seated properly.
Have the automobile inspected if the passenger adjusts their position and the light does not go out.
It might be necessary to shut off and restart the engine to get the light to turn off.
How is the passenger airbag activated?
When an adult-sized individual is spotted in the passenger seat, the front passenger air bags will immediately deploy.
The illuminated word ON on the PASSENGER AIR BAG control on the center console will indicate this. Even with an adult-sized person seated in the passenger seat, the air bag may not deploy. The word OFF will appear on the control in this situation. Do not operate the car if the air bag control cannot detect the person in the passenger seat. Do the following instead:
Once the air bag control has signaled ON after starting the car, keep the passenger and their seat in place for one minute.
The air bag will remain on for one minute after which the passenger may modify their seat and seating posture.
What weight triggers the passenger airbag to deactivate?
If there is less than about 65 lbs (29 kg) on the seat, the front passenger’s airbag will not deploy (the weight of an infant or small child).
Why is the passenger airbag on my car off?
If your passenger is light enough for the weight sensor to notice that they are in the seat but not so light that it would be prudent to deploy the airbag, your passenger airbag will not deploy. The airbag’s deployment would be risky for the person in this chair, according to the sensor, because they are too light.
How do you deactivate the airbag in a Smart vehicle?
The airbag key switch is on the dashboard’s extreme right side. Turn your key counterclockwise to the off position after inserting it. The “passenger airbag off indicator light” should be visible. Put the key into the divot and spin it clockwise to the ON position to turn the airbag back on.
How does the passenger airbag in a discovery sport deactivate?
Discovery 4 in 2016 The passenger airbag disable switch is found on the end of the fascia and is used to turn on and off the passenger’s front airbag. When a kid safety restraint is installed in the front passenger seat, the passenger airbag should be turned off.