- Turn off your car.
- The wrench icon will not appear on the Dashboard until you repeatedly press your info button. On the dashboard’s left side, close to the left air conditioning vent, is where you’ll find the info button. A double square icon with three horizontal bars or the word info can be used to symbolize an info icon.
- Hold down the info button while waiting for the dashboard’s wrench icon to start blinking.
- One more time, press the info button, and then quickly let go.
- Start the engine to see if the reminder has been removed; if the “Routine Maintenance Required” message has vanished, you are finished.
Like any other vehicle, a Mitsubishi Outlander needs routine oil changes to keep the engine from prematurely wearing out.
Every six months or 7,500 miles, the engine oil and oil filter should be changed.
You must reset the Oil Service Interval counter by doing the following after changing the oil and oil filter.
In This Article...
Step 2:Turn breaker off (to the outside unit)
In your home, locate the breaker for the exterior unit of your air conditioner, and then turn the breaker to the “off” position.
Simply locate the circuit with an air conditioning/HVAC designation by opening the circuit breaker box if you’re having problems (next to it).
Quick Tip: Simply seek for the switch that has been “tripped”that is, the one that has shifted to the neutral positionif you do not see any labels.
Step 3:Wait about 30 seconds
Wait around 30 seconds; your air conditioner won’t reset the internal circuit breaker right away. During this period, the internal breaker (in your Mitsubishi air conditioner) should entirely reset.
On a Mitsubishi, where is the reset button located?
Resetting a Mitsubishi TV
- Pushing on the front panel will make it open.
- Push the “System Reset” button using a pointed instrument, like the tip of a paper clip or the sharpened end of a pencil.
- Wait until the green LED light on the front panel display stops flashing, which should take around a minute.