How To Reset Maintenance Light On Mitsubishi Outlander Sport

Mitsubishi / By
  • When the Wrench-Miles-Month appears, press the INFO BUTTON to bring it up. On the right side of the instrument panel, there is an info button.

STEP 5

  • The new service maintenance schedule will be configured after 2 seconds. Reminder for service maintenance has ended. To see if the service reminder has been reset, turn the car on.
  • To scroll to the maintenance reminders, press the page button.
  • Press and hold the page button while the maintenance reminder is visible until the wrench symbol begins to flash.
  • Release the page button and press it once again to display CLEAR while the wrench symbol is flashing.
  • then hit the page button once more. The new maintenance plan will now be established. To make sure the maintenance reminder has been reset, start the automobile.

How can I reset my Mitsubishi needed maintenance?

Service reset ROUTINE MAINTENANCE REQUIRED notification on Mitsubishi Lancer X (also evolution. With a simple button press, you can delete this service interval reminder yourself.

  • Ensure that all of the doors are closed when seated in the driver’s seat.
  • Put the ignition key in the OFF position.
  • To activate the display inside the instrument cluster, press the INFO button. Look for the service-related notice with a spanner icon.
  • Hold down the INFO button while waiting for the spanner icon to flash.
  • Hit the INFO key. You must observe “VERY CLEAR notice on the screen.
  • To confirm the reset of the service reminder, press the INFO button once more. The distance and time to the next service should now be updated.
  • To ensure that the ignition is on, “The notification “ROUTINE MAINTENANCE REQUIRED” has vanished.

Exactly how can you turn a 2015 Mitsubishi Outlander’s maintenance light back on?

Okay, so here is a guide explaining how to turn off the periodic inspection or service light on an older Mitsubishi Outlander (2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015). So what you must do is:

  • Deactivate the ignition.
  • until thespanner appears, repeatedly press the INFO button.

You navigate through the INFO button here while the ignition is off until you find the spanner icon.

  • Hold the INFO button while pressing.
  • Press the INFO button one more after releasing it.

When you hit the INFO button once more, CLEAR will appear on the dash.