Turn the ignition to the ON place on the Mitsubishi Outlander by pressing the on/off button twice without pulling the trigger, and then try a single click to reset the Bluetooth. The “hang-up” button should be pressed and held for 2 seconds. Press the button once, then twice.
In This Article...
How do I disconnect the gadgets from my car’s Bluetooth?
Remove your phone from the list of linked devices in your car:
- Use the touch screen of the vehicle to access the list of associated devices while the engine is running.
- Choose the phone number.
- Make that the name of the phone is no longer listed among the linked devices.
Take the car off your phone’s list of connected devices:
- Select Bluetooth in the phone’s settings.
- In the list of associated devices, look for the name of the car.
- Delete or Forget This Connection are your options.
How can I reset my multimedia on my Mitsubishi Outlander?
Yes, you can modify the settings on a Mitsubishi Navigation System to make all the doors unlock: Then select Power Door Locks > Unlock Operation under SET > Equipment. Using the buttons on your FAST-key fob, you can still modify the settings if you don’t have a navigation system:
- First, hold down the Lock #1 button.
- Step 2: Press and hold Lock #1 for four seconds, then press and hold Unlock #2 for four seconds (do not allow more than ten seconds to pass).
- Step 3: Continue to hold both buttons down, and then let go of Lock #1 first.
- Release the Unlock #2 button second in step four.
On a 2012 Mitsubishi Outlander, how do you reset the Bluetooth?
Turn on the system and, without pressing any other buttons, push and hold the hangup button for 2 seconds before letting go. Repeat this process 3 more times, each time letting go after 2 seconds. Within 10 seconds, all of this must be completed.
How can I take something out of my car?
- From the bottom of the screen, swipe upward.
- Click the Settings button.
- Choose Device Connection or Connected Devices.
- Choose Bluetooth or Previously linked devices.
- Turn on Bluetooth if it is currently off.
- A list of saved Bluetooth devices is displayed on the mobile device.
- To unpair a device, tap the (Settings/gear) icon next to its name.
- In the event that another choice appears, choose Forget device.
How can I link my 2014 Mitsubishi Outlander to my phone?
- On the steering wheel, press the speaking button. It shows a picture of a head with lines coming out of the mouth. Attend to the buzzer.
- “Setup,” after the beep. At this time, the vehicle will present a number of alternatives through the audio system. Wait until it has finished the list before it beeps once again.
- Pairing options, you say. Once more, the menu in the car will have choices like “list phones,” “choose phone,” and “connect a new phone.” Attend to the buzzer.
- utter “Pair. You will receive instructions from the Outlander and be prompted to enter a four-digit PINcode.
- Any four-digit pin code will do. To finish the pairing process, input this PIN code on your phone straight away.
How can I pair the Bluetooth on my Mitsubishi?
1. Come to a complete stop before the vehicle and engage the “Park position, or P.
2. Select SPEECH from the menu (on steering wheel, headliner or dashboard).
NOTE: The Bluetooth Hands-Free Phone System conforms with many state regulations requiring hands-free phone use while driving and is practical, safe, and legal.
3. Say “Setup .
4. Say “Optional Pairings
As the voice guide says “Choose between the options pair, edit, delete, or list.
5. Say “Pair
As the voice guide says “Tell me the pairing code, please. It is necessary for you to write your own code.
6. Mention a four-digit number.
The system will validate whether the entered number is acceptable when the confirmation feature is on.
As the voice guide says “Start the device’s pairing process. Instructions can be found in the device handbook.
7. Enter the four-digit Bluetooth device registration code that you obtained in step six.
As the voice guide says “After the beep, kindly mention the name of the device. The Bluetooth device can be given any name you choose and registered as a device tag. You can say your name by itself, i.e “Phone of Bill.
8. After the beep, say the name you want to register.
As the voice guide says “When the pairing process is finished, a beep will be audible.
NOTE: Only seven devices can be linked at once. Certain Bluetooth devices demand a unique pairing code. For pairing code specifications, consult the device’s user handbook. The pairing code can be chosen by the user and is only employed during certification. Keep in mind the pairing code in case you need it later.