The normal price range for a starter replacement is $440 to $551. Between $112 and $141 can be spent on labor, while between $307 and $410 can be spent on parts.
In This Article...
The starter motor is where, exactly?
The starter motor in your car is a strong electric device that turns the engine over and starts the combustion process before the engine can continue on its own.
A flywheel and a pinion gear are used to secure the starter motor to the crankshaft’s end. The starter motor engages when the ignition is turned on, and an internal magnetic forces a rod out with the pinion gear. As a result, the flywheel turns, starting the engine.
A starter motor is intended to function for the whole life of the vehicle, but occasionally the magnet or gears need to be replaced. All the information you require to replace your starting motor is in Haynes.
Depending on your model, this task will take up to two hours or so, some experience, and simple tools.
A starter for a 2002 Mitsubishi Galant costs how much?
For your 2002 Mitsubishi Galant, we now offer 9 Starter products with prices ranging from $158.60 to $263.99 in our store.
With a damaged starter, how do you start a car?
There are two methods for starting an engine with a bad starter motor:
- Restart your vehicle
- Start your car with a push.
However, you need to have the following resources available before you start working on a beginner problem.
If you do have the necessary equipment, try one of these two approaches of starting your car:
Jump-Start Your Car
Your automobile may frequently not start because of a weak or drained battery. Giving the starter enough amps will enable it to operate normally, which will cause the engine to start.
You can either use a portable jump starter or the battery and jumper wires from another automobile to jump-start a vehicle.
What you should do next is as follows:
- Locate the automobile battery by lifting the hood of your vehicle. Consult the car’s handbook if you can’t find it. Don’t work on your automobile battery if it appears bloated or is dripping. Instead, give a mechanic a call because the battery could need to be changed.
- If the car battery appears to be in good condition, connect the positive terminal of your weak battery to the positive terminal of the backup battery or jump starter using the positive wire (red jumper cable).
- Connect the negative terminal of the charged battery to any exposed metal on the vehicle using the black jumper cable.
- Now start the engine and wait for the battery to charge for a few minutes.
Depending on the engine type, DOD, and battery condition, a dead battery may take between 5 and 20 minutes to start up.
Detach the jumper cables once you’ve successfully started your automobile with a jump. The (-ve) clamp comes first, followed by the (+ve). Ensure that none of these cables touch one another as well.
Note: A broken starter may be to blame if your battery is charged but your car still won’t start. The starter relay can thus be disregarded.
There is also another, more straightforward method you can employ as well:
Push-Start Your Engine
Push-starting, often referred to as bump-starting, is an antiquated yet reliable method to start an automobile with a defective starter. It only functions, though, if your car has a manual transmission.
How to do it is as follows:
- Keep the engine running while shifting into first or second gear on your car’s manual transmission. Maintaining your vehicle in second gear will enable a smooth push-start. Additionally, it lessens system harm to your car. However, when you have a significantly smaller distance to push-start, use the first gear.
- Get a strong person to push your automobile from behind so it can accelerate to 510 mph.
- When you reach this speed, release the clutch. The car can be started with the speed that has been reached.
- If the first try is unsuccessful, repeat the procedure.
If you have attempted the aforementioned techniques for starting a car with a bad starter motor and been unsuccessful, you might wish to examine your vehicle’s other parts.
How can a bad starter be identified?
Still, look for these seven symptoms that your starter is going bad.
- #1: The Engine Won’t Start.
- #2: Loud, grinding, or whirring noise.
- #3: Occasional Trouble Starting the Car.
- #4: The Starter Continues After the Start.
- #6: The starter engages but the engine won’t turn over.
Why does starting a car need tapping?
This works because as the brushes deteriorate, an insufficient electrical contact results. The brushes are pushed back into position so they may make contact once more by lightly pressing the rear of the starter with the hammer.