How To Change A Headlight Bulb On A Mitsubishi Colt

How to put in headlights

  • Change the two bulbs (recommended)
  • Find the locations of the high and low beams.
  • Take advantage of the lights (this varies)
  • Release the clasp to take out the plug.
  • Remove the old lightbulb.
  • Choose the appropriate high- and low-beam bulbs.
  • Replace the lightbulb.

Step 4. Unscrew the old headlight

Zullo warns that every car is unique. “He claims that while you can reach the bulb with some autos, you can’t with others. Sometimes you have to remove the inner fender to reach behind it because the battery or air filter housing is in the way.

However, changing the halogen bulb is all that is required if you can get the headlight open. This entails carefully unlocking the bulb after examining how it is secured. Zullo cautions that if the clips that are being used here are broken, the entire headlight would need to be replaced. “According to him, you must first examine how it is connected, softly disassemble it, and then carefully reassemble it without touching the bulb’s glass.

Step 5. Screw in the new headlight bulb

Without touching the bulb’s glass, carefully screw in the new bulb. If you do, the oil and grime on your hands could cause the bulb to burst once it heats up. Your car’s hood should be closed. Your headlights ought to work perfectly again after installing the new bulb, allowing you to enjoy driving your automobile day or night.

Most of the time, changing a headlight is simple and doesn’t need sending your car to the shop. See what other do-it-yourself auto maintenance tasks are available.

How is a headlight removed?

  • Get some gloves to wear. One of the main reasons for early burn out is oil staining. Your light bulb could burn out very rapidly if there is even one fingerprint on the glass. Wearing latex or vinyl gloves while changing your bulb will help you avoid this.
  • Choose the appropriate headlight bulb. You may find out what kind of bulb your car needs by consulting the owner’s manual. You can use it to help you replace the bulb for your particular car.
  • Shut off your car. It is for your protection.
  • Locate the headlamp holder by opening the hood. It’ll be close to the front of your vehicle.
  • Remove the power cables. Three of them will typically need to be disconnected. These are frequently secured by a screw cap, metal clip, or plastic catch.
  • Remove the old lightbulb. In many cars, the headlight holder’s back may be taken off to reveal the bulb. To remove the bulb from its socket, you might need to spin it.
  • substitute a fresh bulb. Wear your gloves before touching the new bulb, don’t forget. Additionally, using an alcohol wipe to clean it prior to installation is a smart idea. Put the headlight holder back in its original location after inserting the bulb into the base. Reconnect the wires that you previously disconnected.
  • Examine the bulb. In order to check that your new bulb is operating properly, turn on your headlights. Check your work again to make sure you used the right bulb if it doesn’t work. If everything appears to be in order, you can also have a wiring or fuse problem. Consult a local mechanic for assistance if you need assistance figuring out what is wrong.

Can I replace the headlight bulb on my own?

Fortunately, changing a headlight is frequently simple. The majority of the high-intensity discharge (HID) or light-emitting diode (LED) bulbs used nowadays are easy to swap out. They are secured by rotating bayonet-style retainers or tiny wire clips. They can be removed from the wiring, rapidly pushed out from behind the headlight housing, and replaced with a functional bulb. But before you can replace a headlight, you must figure out what kind of bulb you require. Your owner’s manual should be your first port of call.

Do you require special equipment to change a headlight bulb?

Analyze the best way to remove the old bulb. On some cars, the bulb is positioned directed into the headlight assembly, while on others, the bulb is fixed in the headlight assembly by a wire arrangement. You can take out the bulb once you understand how it is held in the housing.

You’ll also be able to decide at this time whatever tools you’ll need to finish the project. Some headlight bulbs do require the use of a flathead or Phillips screwdriver, but the majority can be removed without them.

Remove any power wires that are attached to the back of the light bulb. The back of the headlamp may also have a dust cover that needs to be taken off. The bulb may alternatively be secured in place by a clip or clips.

What headlight bulb do I need, and how do I get it?

You can also get fitting information from your car’s manufacturer, or you can just look in your owner’s manual, which should list all the fittings your car needs for each kind of light.

You can take the headlight off and examine the bulb if you’re a little more hands-on and competent with tools. The fitting name, such as “H7,” will be written around the bulb’s housing. Look at this illustration:

How much does a headlight replacement cost?

Depending on the make and model of the car, as well as whether it is a sedan, pickup truck, or SUV, the price to replace the entire headlight assembly might vary greatly. The cost of a high-quality headlight assembly can range from $250 to $700.