These two techniques seem to work with the majority of Honda and Acura vehicles.
Approach 1:
- Activate the ignition.
- Turn off the radio if CODE appears on the screen.
- For 4050 seconds, press and hold the Power/Volume button.
- In less than a minute, your radio should be unlocked.
Approach 2:
- Holding down the Down button and the Power button for 60 seconds
- You should have access to both radio and music without having to use the radio.
The Honda Pilot, Honda Civic, and Honda Accord, as well as the Acura ILX, TLX, and RDX vehicles from 2010 and newer, can all be repaired using this technique.
Simply turn off the radio and push buttons #1 and #6 in addition to Power, as seen in the below image.
You require a different variant for more recent devices with touchscreens. Eject and Home should be pressed along with the Power Button as seen in the illustration below. When you reach the menu To obtain the serial, touch “Detailed info settings, followed by “Unit Check and then DA Unit.
You will receive your FREE Code to unlock your Honda or Acura radio once you have connected your serial to your website.
Other ways to obtain the serial number. Search for a sticky note on the side or interior of the glove box. Additionally, you can look in the service history book; you might find the code there. Typically, the paper is the size of a credit card.
The dealership is suggested if all else fails because removing your radio can be challenging and requires expert tools.
PRO TIP: If you mention that you need a radio code when you phone your dealer, they will put you on hold for an eternity. It is preferable to indicate that you require servicing and, when you arrive at the service department, request the code. You’ll need both the radio serial and your VIN number for this to function.
In This Article...
Does removing the battery reset the radio?
Several crucial systems will go dark if you have to disconnect the battery in your car. One thing you’ll need to do is reset the clock. When you change the battery, you’ll also have to enter the radio code for your stereo system. In order to restart your car’s navigation system, you will need to enter the PIN.
Clock: Press the clock button repeatedly until it beeps, then set the time using the H and M buttons.
Radio Code: To input the code, press the preset buttons on the radio (the code should be on a card with your other important papers).
PIN: Keep your other critical paperwork with your navigation system PIN.
After detaching and reconnecting a battery, you won’t need to input a radio code if you drive an LX, LX-P, or SE model.
Can I factory reset the radio in my car?
Just turn the ignition on, not the engine. Switch off the radio. To reset the radio, press and hold the power button for a few minutes.
What are the codes for radio 10?
- 10-1 = Poorly receiving
- 10-2 = Effective reception
- 10-3 indicates that you should stop transmitting.
- 10-4 = Notification received
- Relay the message to __ at 10-5.
- 10 to 6 are busy; kindly wait
- 10-7 = No longer in use; turning off the air
- 10-8 = In service, available upon request
- 10-9 = Send message again
- 10:10 Completed transmission; standing by
- 1011 = Rapid-fire speaking
- 1012 = Number of visitors
- 1013 = Inform about weather and road conditions
- 10 to 16: Arrange pick-up at
- 1017 = Important business
- Anything for us, 10-18?
- 1019: Nothing for you; go back to the start
- 10-20 = ____ is where I am.
- 10-21 = Dial a phone number
- 10-22 = In person, go to
- 1024 = Last assignment completed
- Can you please call ?
- 1026 = Ignore previous information
- I’m switching to channel __ at 10:27.
- Identify your station with 10-28.
- Time is up for contact at 10-29.
- 1030 = Does not comply with FCC regulations
- I’ll give you a radio check at 10-32.
How can I reset the radio in my Mitsubishi Outlander?
Yes, you can modify the settings on a Mitsubishi Navigation System to make all the doors unlock: Then select Power Door Locks > Unlock Operation under SET > Equipment. Using the buttons on your FAST-key fob, you can still modify the settings if you don’t have a navigation system:
- First, hold down the Lock #1 button.
- Step 2: Press and hold Lock #1 for four seconds, then press and hold Unlock #2 for four seconds (do not allow more than ten seconds to pass).
- Step 3: Continue to hold both buttons down, and then let go of Lock #1 first.
- Release the Unlock #2 button second in step four.
Where can I discover the serial number for my radio?
The body of your radio unit bears the serial number of your radio.
You must take the radio out of the dash to get to it.
If you’re unclear of how to remove the radio correctly, check your owner’s manual or take your car to a mechanic.
Damage to the radio and dashboard may result from improper radio removal.
You can get your radio code in one of three ways after you have your radio serial number:
To Access Your Honda Radio Code via Phone
Dial 1-800-999-1009 to reach Honda America Client Services. Your VIN number, radio serial number, and ownership documentation will need to be provided.
To Access Your Honda Radio Code from a Dealership
Bring your radio’s serial number and ownership documentation to your neighborhood Honda or Acura store.
Once you’ve located your radio code, note it down for any future uses as it won’t change.
Where in the owner’s manual is the radio code?
Look for the Anti-Theft Radio Identification Card in your owner’s manual. There are two sets of numbers in the lower right corner. Your code should be in the top group, which should be shorter and bold.